• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10c
• /
• pp.561-563
• /
• 2000

본 논문은 멀티캐스트 패킷 스위치의 성능 향상에 관하여 언급한다. 네트워크에 요구된 복사본의 수가 네트워크의 크기보다 클 경우 발생되는 오버플로우 문제를 해결하기 위해 Lee의 브로드캐스트 반얀 네트워크(BBN)를 기반으로 하여 다중경로와 다중출력을 제공하는 기능이 추가된 구조를 제안하였으며, 여기에 입력에서 다음 처리해야할 패킷의 fanout 값이 남아있는 BBN의 출력포트 수보다 클 경우 패킷이 복사될 수 없게됨으로서 발생되어질 수 있는 네트워크의 성능이 저하되는 문제를 해결하기 위하여, 셀분할 알고리즘을 이용한 수정된 DAE(dummy address encoder) 방식을 제안하였다.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.514-515
• /
• 2010

본 논문은 다중출력 스위칭 모드 전원 공급장치의 경부하 상태에서 2차측의 부하 전압안정을 위하여 일반적으로 사용하는 선형 전압조정기의 제어기 내 부하전류정보를 이용하여, 대기모드를 구현함으로써 시스템의 효율을 향상 시켰다. 제안된 회로의 동작원리를 설명하고 이를 시뮬레이션을 통하여 확인하고 20W급 하드웨어 프로토타입을 이용하여 검증하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.04a
• /
• pp.490-492
• /
• 2001

본 논문은 ATM 멀티캐스트 스위치를 위한 새로운 복사망을 제안하였다. Lee의 복사망과 그 이후 제안된 복사망에서 문제가 된 오버플로우와 충돌 문제를 해결하기 위해 다중경로와 다중출력을 갖는 B-tree 네트워크를 사용하였다. 또한 높은 부하에도 충돌을 줄이고 복사망의 성능을 높이기 위해 B-Tree 네트워크의 각 SE에 출력 및 공유 버퍼 성격을 지닌 크로스포인트 버퍼를 추가한 IBBT 네트워크를 제안하였다. 제안된 복사망은 Lee의 복사망의 특성을 유지하며, 이 IBBT 네트워크를 복사망의 BBN에 적용하고, 셀 분할 알고리즘을 사용하여 복사망의 성능을 향상 시켰다.

• Information and Communications Magazine
• /
• v.33 no.7
• /
• pp.3-9
• /
• 2016

본고에서는 UHD (Ultra High Definition) 지상파 방송 서비스가 가능한 기술로서 하이브리드 전송, 단일 주파수망 (SFN) 기술, 전송채널 결합, 계층분할 다중화 (LDM), 다중입력 다중출력 (MIMO) 등의 기술을 ATSC 3.0 표준안을 기반으로 알아본다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.5
• /
• pp.486-492
• /
• 2004

In this paper, we newly propose the binary CA-CDMA(constant amplitude CDMA) system using pre-coding method to solve the high PAPR problem caused by multi-user signal transmission in the CDMA system. 4-user CA-CDMA, the basis of proposed binary CA-CDMA system, makes binary output signal for 4 input users. It produces the output of binary(${\pm}$2) amplitude by using a parity signal resulting from the XOR operation of 4 users data. Another sub-channel or more bandwidth is not necessary because it is transmitted together with user data and can be easily recovered in the receiver. The extension of the number of users can be possible by the simple repetition of the basic binary 4-user CA-CDMA. For example, binary 16-user CA-CDMA is made easily by allocating the four 4-user CA-CDMA systems in parallel and leading the four outputs to the fifth 4-user CA-CDMA system as input, because the output signal of each 4-user CA-CDMA is also binary. By the same extension procedure, binary 64 and 256-user CA-CDMA systems can be made with the constant amplitude. As a result, the code rate of this proposed CA-CDMA system is just 1 and binary CA-CDMA does not change the transmission rate with the constant output signal(PAPR = 0 ㏈). Therefore, the power efficiency of the HPA can be maximized without the nonlinear distortion. From the simulation results, it is verified that the conventional CDMA system has multi-level output signal, but the proposed binary CA-CDMA system always produces binary output. And it is also found that the BER of conventional CDMA system is increased by nonlinear HPA, but the BER of proposed binary CA-CDMA system is not changed.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.292-297
• /
• 2003

A diode-pumped single-mode Nd:YV $O_4$ green laser was developed. Frequency doubling of the laser was achieved by using an intracavity KTP generated green beam (532 nm). By comparing the diode laser spectrum with absorption spectrum of the Nd:YV $O_4$ crystal, we found optimal operating temperature of the diode laser. From output power measured for various mirror curvatures and cavity lengths, we found the optimal matching of TE $M_{00}$ mode with the pump beam gives the best efficiency. When the pump power was 1.9 W, 80 ㎽ of TE $M_{00}$ mode green beam was obtained. We tried to get a single longitudinal mode lasing as the fluctuation of the laser power was caused by the shift of longitudinal modes and the beating between the modes. We tested the intracavity etalon method and birefringent filter method for single mode operation. The etalon method resulted in the best single mode output power of 60 ㎽. The power fluctuation of the single-mode laser was reduced to 1/10 of that of the multi-mode laser.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1A
• /
• pp.8-18
• /
• 2011

Visible light communication (VLC) using optical sources which can be simultaneously utilized for illumination and communication is currently an attractive option for wireless personal area network. Improving the data rate in optical wireless communication system is challenging due to the limited bandwidth of the optical sources. In this paper, we design the singular value decomposition (SVD)-based multiplexing multi-input multi-output (MIMO) system to support two data streams in optical wireless channels. In order to improve the spectral efficiency, the rate adaptation using multi-level pulse amplitude modulation (PAM) is applied according to the channel condition and we propose the method to allocate the optical power, the offset and the size of modulation scheme theoretically under the constraints of the nonnegativity of the modulated signals, the aggregate optical power and the bit error rate (BER) requirement. The simulation results show that the proposed allocation method gives the better performance than the method to allocate the optical power equally for each data stream.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.12
• /
• pp.2747-2754
• /
• 2012

This thesis explains the development of multiple LCD system with the additional function to maximize the utilization of PC contents. The newly developed system is composed of host LCD and slave LCD. Host LCD decodes and outputs the image and voice of NTSC, PAL, SECAM signals. It also converts the decoded signals into LVDS signals before transmitting them to slave LCD stage. In addition, the installation of CF Memory and USB Memory helps display multi-media data. Unlike the host LCD, since not including the tuner and memory part, the slave LCD can't receive TV signals and play video signals. It only has the function to receive LVDS image signals and display on a LCD panel. This newly developed multi-LCD system has competitiveness in various aspects. With its simple structure, the failure rate, price and display power are relatively low due to its simplification of the control part. It has price and functional competitiveness as the product whose host LCD can control the entire slave LCD in terms of channel, volume, and video output.

• Korean Journal of Optics and Photonics
• /
• v.6 no.2
• /
• pp.115-121
• /
• 1995

본 논문에서는 일체형, Nd:YAG 고리 레이저에서 서로 반대방향으로 진행하는 두 모드의 비선형적인 상호작용에 의한 출력 불안정 현상을 조사하였다. 실험을 통하여 두 모드가 각각 단일 종모드로 발진함을 확인하였고, 레이저가 발진하는 임계치 부근의 낮은 펌핑수준을 유지하여 다중모드간의 경쟁이나 단방향 발진에 의한 출력 불안정이 아님을 확인하였다. 또한 잘 알려진 시스템 고유의 감쇄진동과 구별되는 현상임을 보였다. 두 모드간의 손실차가 클수록 이 출력의 변조주파수는 증가하고 변조폭이 줄어 들어 안정화 되며 단방향 발진이 일어난다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5C
• /
• pp.376-383
• /
• 2012

In this paper, we provide a general expression of spatial multiplexing gain (SMG) for two mutually interfering multiple-input multiple-output (MIMO) broadcast channels, referred to as MIMO-IBC, when some of user messages are made available to base stations through a common noiseless backbone line. The MIMO-IBC has two base stations and multiple users, each equipped with multiple antennas, where independent messages are transmitted over fixed channels. From the derived results, we observe the variation of the SMG with respect to the presence of a coordination as well as various antenna distributions, and compare the derived result to the SMG of the case with full cooperation among users.