• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1B
• /
• pp.21-30
• /
• 2012

Sensor networks are composed of a great number of sensor nodes with constrained battery. Disjoint multipath scheme based flooding method has a merit that efficiently construct multipath in irregular networks, but causes lots of energy consumption in networks. Flooding method is not a suitable technology in wireless sensor networks with constrained battery. We introduce energy-efficient geographic routing scheme considered as an efficient, simple, and scalable routing protocol for wireless sensor networks. The geographic routing scheme on multipath generates a problem with a congestion. So we introduce the concept of multipath pipeline as a congestion avoidance strategy. But multipath pipelines have a big problem on the boundary of holes under irregular networks. We propose a novel disjoint multipath scheme as combined method with geographic routing scheme and hole detouring algorithm on multipath. A novel disjoint multipath scheme constructs disjoint multipath pipelines efficiently for reliability without a collision in irregular wireless sensor networks. Simulation results are provided to validate the claims.

• Journal of the Korean Magnetics Society
• /
• v.17 no.4
• /
• pp.152-155
• /
• 2007

We have studied electronic structures and magnetic properties of $YMnO_3,\;ScManO_3$ with hexagonal structure using Full Potential Linearized Augmented Plane Wave (FLAPW) method based on LSDA method. LSDA calculation results show that multiferroic $YMnO_3$ shows energy gap due to hexagonal symmetry and magnetic interaction. Because of insulating gap and small Y ion, $YMnO_3$ shows magnetic and ferroelectric state. However, $ScMnO_3$ does not show the energy gap because of strong hybridization of Mn-O for LSDA calculation. We confirmed the stability of multiferroic state for $YMnO_3\;and\;ScManO_3$ using total energy calculations. The antiferromagnetic and ferroelectric states have the lowest energy about 100 meV.

• The KIPS Transactions:PartC
• /
• v.12C no.1 s.97
• /
• pp.77-82
• /
• 2005

Protection of user service becomes increasingly important since even very short interruption of service due to link or node failure will cause huge data loss and incur tremendous restoration cost in high speed network environment. Thus fast and efficient protection and restoration is one of the most important issues to be addressed. Protection methods have been proposed to provide efficiency and stability in optical networks. In this paper, an original network is separated into several domains using Hamiltonian cycle. and link protection is performed on the cycles of the domains. We have shown that protection path length can be decreased up to $57{\%}$ with marginal increase of backup capacity. Our proposed method can provide high-speed protection with marginal increase of protection capacity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.1
• /
• pp.58-67
• /
• 2013

In this paper, a mobile relay station(MRS) for vehicles with a beamforming antenna is considered to increase the reliability of a transmission link, especially for the MRS at cell boundary. Cell searching and direction-of-arrival(DoA) estimation methods for an MRS with a uniform linear array(ULA) are proposed for a multipath environment in OFDM-based cellular systems. Performances of the proposed methods(Method1 and Method2) are evaluated by computer simulation with the standard profile of IEEE 802.16e.

• Annual Conference on Human and Language Technology
• /
• 2019.10a
• /
• pp.18-22
• /
• 2019

FAQ 분류는 자주 묻는 질문을 범주화하고 사용자 질의에 대해 가장 유사한 클래스를 추론하는 방식으로 진행된다. FAQ 데이터셋은 클래스가 다수 존재하기 때문에 클래스 간 포함 및 연관 관계가 존재하고 특정 데이터가 서로 다른 클래스에 동시에 속할 수 있다는 특징이 있다. 그러나 최근 FAQ 분류는 다중 클래스 분류 방법론을 적용하는 데 그쳤고 FAQ 데이터셋의 특징을 모델에 반영하는 연구는 미미했다. 현 분류 방법론은 이러한 FAQ 데이터셋의 특징을 고려하지 못하기 때문에 정답으로 해석될 수 있는 예측도 오답으로 여기는 경우가 발생한다. 본 논문에서는 신뢰성이 부족한 FAQ 데이터셋에서도 분류를 잘 하기 위해 손실 함수를 조정하는 정규화 기법을 소개한다. 이 정규화 기법은 클래스 간 포함 및 연관 관계를 반영할 수 있도록 오답을 예측한 경우에도 예측 강도에 비례하여 손실을 줄인다. 이는 오답을 높은 확률로 예측할수록 데이터의 신뢰성이 낮을 가능성이 크다고 판단하여 학습을 강하게 하지 않게 하기 위함이다. 실험을 위해서는 다중 클래스 분류에서 가장 좋은 성능을 보이고 있는 모형인 BERT를 이용했으며, 비교 실험을 위한 정규화 방법으로는 통상적으로 사용되는 라벨 스무딩을 채택했다. 실험 결과, 본 연구에서 제안한 방법은 기존 방법보다 성능이 개선되고 보다 안정적으로 학습이 된다는 것을 확인했으며, 데이터의 신뢰성이 부족한 상황에서 효과적으로 분류를 수행함을 알 수 있었다.

• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.11
• /
• pp.263-270
• /
• 2019

Vehicular cloud computing is a new emerging technology that can provide drivers with cloud services to enable various vehicular applications. A vehicular cloud is defined as a set of vehicles that share their own resources. Vehicles should collaborate with each other to construct vehicular clouds through vehicle-to-vehicle communications. Since collaborating vehicles to construct the vehicular cloud have different speeds, directions and locations respectively, the vehicular cloud is constructed in multi-hop communication range. Due to intermittent wireless connectivity and low density of vehicles with the limited resources, the construction of vehicular cloud with multi-hop communications has become challenging in vehicular environments in terms of the service success ratio, the service delay, and the transmitted packet number. Thus, we propose a multi-hop vehicular cloud construction protocol that increases the service success ratio and decreases the service delay and the transmitted packet number. The proposed protocol uses a connection time-based intermediate vehicle selection scheme to reduce the cloud failure probability of multi-hop vehicular cloud. Simulation results conducted in various environments verify that the proposed protocol achieves better performance than the existing protocol.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.136-137
• /
• 2007

This study was to analyze the visual preference of the port landscapes for North port in Busan. Preference related variables came from Semantic Differential(SD) method and then were conducted by the factor analysis. Multiple regression was done for the relationship between the preference and factors. The result found 4 factors, including dynamics, stability, pleasantness and healthiness. Much importance was placed on dynamics among them. Therefore, building port landscapes and their image attracting viewers should consider dynamics in terms of port landscape plan and user attraction development for visual quality management.

• Journal of Navigation and Port Research
• /
• v.32 no.3
• /
• pp.265-269
• /
• 2008

This study was to analyze the visual preference of the port landscapes for North port in Busan. Preference related variables came from Semantic Differential(SD) method and then were conducted by the factor analysis. Multiple regression was done for the relationship between the preference and factors. The result found 4 factors, including dynamics, stability, pleasantness and healthiness. Much importance was placed on dynamics among them. Therefore, building port landscapes and their image attracting viewers should consider dynamics in terms of port landscape plan and user attraction development for visual quality management.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.25 no.1
• /
• pp.55-68
• /
• 1999

A muti-lamellar emulsion containing a pseudoceramide, N-Ethanol-2-myristyl/ palmityl-3-oxostearmide/arachidamide(PC-9) has been prepared and its efficacy evaluation has been investigated. In order to prepare a muti-lamellar emulsion, first, the gram ratios of PC-9, fatty acid and cholesterol on the phase diagram to be capable of forming their lamellar liquid crystal structures were determined and secondly, the multi-lamellar emulsion was preprared using glyceryl monostearate and polyoxyethylene glyceryl monosteartate as emulsifers together with above mentioned pseudo-stratum corneum lipid components. Besides natural oils such as olive oil had a tendency to build up the multi-lamellar emulsion. And according as the amount of oil increased in the emulsion, it was observed that the optical anisotropy of “Maltese Cross” which was a typical configuration of multi-lamella mesophase texture diminished. In the dried state of the multi-lamella emulsion, it was examined to transform its emulsion phase into a lamella liquid crystal one. And finally, when the emulsion was applied into a human skin, it was investigated that it had effectiveness in reducing transepidermal water loss (TEWL) of the skin.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10A
• /
• pp.1113-1122
• /
• 2004

This paper is basically to achieve the high-availability and high-reliability of the control system from the implementation of the fault-tolerant system using the hot-standby sparing technique. To meet the objective, we design and implement a board with fault tolerance I/O bus to detect the fault. Warm-standby sparing technique is the fault tolerance technique usually used for switching control system in present. This technique can be easily implemented, but can not detect the fault quickly and can malfunction because of the hardware fault. The hot-standby sparing fault tolerant technique implemented in this paper is consists of dual processor modules and a I/O processor using fault tolerant I/O bus. The proposed method can find the faults as soon as possible, so it can prevent from wrong operation. Also it is possible to normal re-service due to the short recovering time. To implement the fault-tolerant dual system with fault detection be, two daughter, called FTMA and FTIA, boards designed and implemented are applied to the system. And we also simulated the proposed method to verify the high-availability and high-reliability of the control system using Markov process.