• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.2
• /
• pp.1-12
• /
• 2016

This paper is to analyze characteristics of transfer trips and to identify impacts of land use on them. Using the smart transport card data of Seoul on a weekday in April 2013, we explored general characteristics of the transfer trips such as spatial and temporal distributions, transfer types, and geographical patterns of transfer trips. Then, the multiple regression model for the transfer trips was developed, considering land use as well as socio-economic variables as explanatory ones. For the characteristics of the transfer trips, their ratio to the total trips accounts for 26.7%. Nearly 87% of the trips are one-time transferred, and 64.7% are bus-subway transfer trips. In addition, the transfer trips are more likely to appear nearby subway stations and business facilities. The regression model indicates that land use variables such as the floor areas of business facilities and department stores and mixed land use index significantly positively affect the transfer trips. Our results can be used as basic data for choosing feasible locations of multi-modal transfer centers in urban areas.

• Water for future
• /
• v.28 no.4
• /
• pp.195-204
• /
• 1995

New dispersion coefficient equation which can be used to estimate dispersion coefficient by using only hydraulic data easily obtained in natural streams has been developed. Dimensional analysis was performed to select physically meaningful parameters, One-Step Huber method, which is one of the nonlinear multi-regression method, was applied to derive a regression equation of dispersion coefficient. 59 measured hydraulic data which were collected in 26 streams in the United States and were analyzed in the Part I of this study, were used in developing new dispersion coefficient equation. Among 59 measured data sets, 35 data sets were used in deriving regression equation, and 24 data sets are used for verification. The new dispersion coefficient equation, which has been developed in this study was proven to be superior in explaining dispersion characteristics of natural streams more precisely compared to existing dispersion coefficient equations.

• Journal of the Korean Society for Railway
• /
• v.13 no.2
• /
• pp.222-228
• /
• 2010

In this paper, we propose a optimization approach for the Electric Locomotive Overhaul Maintenance Facility (ELOMF), which aims at the simulation optimization so as to meet the design specification. In simulation design, we consider the critical path and sensitivity analysis of the critical (dependent) factors and the design (independent) parameters for the parameter selection and reduction of the metamodel. Therefore, we construct the multi-objective non-linear programming. The objective function is normalized for the generalization of design parameter while the constraints are composed of the simulation-based regression metamodel for the critical factors and design factor's domain. Then the effective solution procedure based on the pareto optimal solution set is proposed. This approach provides a comprehensive approach for the optimization of Train Overhaul Maintenance Facility(TOMF)'s design parameters using the simulation and metamoels.

• Korean Journal of Remote Sensing
• /
• v.33 no.2
• /
• pp.135-147
• /
• 2017

We, for the first time, estimated daily and monthly surface nitrogen dioxide ($NO_2$) volume mixing ratio (VMR) using three regression models with $NO_2$ tropospheric vertical column density (OMIT-rop $NO_2$ VCD) data obtained from Ozone Monitoring Instrument (OMI) in Seoul in South Korea at OMI overpass time (13:45 local time). First linear regression model (M1) is a linear regression equation between OMI-Trop $NO_2$ VCD and in situ $NO_2$ VMR, whereas second linear regression model (M2) incorporates boundary layer height (BLH), temperature, and pressure obtained from Atmospheric Infrared Sounder (AIRS) and OMI-Trop $NO_2$ VCD. Last models (M3M & M3D) are a multiple linear regression equations which include OMI-Trop $NO_2$ VCD, BLH and various meteorological data. In this study, we determined three types of regression models for the training period between 2009 and 2011, and the performance of those regression models was evaluated via comparison with the surface $NO_2$ VMR data obtained from in situ measurements (in situ $NO_2$ VMR) in 2012. The monthly mean surface $NO_2$ VMRs estimated by M3M showed good agreements with those of in situ measurements(avg. R = 0.77). In terms of the daily (13:45LT) $NO_2$ estimation, the highest correlations were found between the daily surface $NO_2$ VMRs estimated by M3D and in-situ $NO_2$ VMRs (avg. R = 0.55). The estimated surface $NO_2$ VMRs by three modelstend to be underestimated. We also discussed the performance of these empirical modelsfor surface $NO_2$ VMR estimation with respect to otherstatistical data such asroot mean square error (RMSE), mean bias, mean absolute error (MAE), and percent difference. This present study shows a possibility of estimating surface $NO_2$ VMR using the satellite measurement.

• Journal of the Korean Data and Information Science Society
• /
• v.26 no.1
• /
• pp.65-75
• /
• 2015

This paper analyzes the determinants of wage for the college and university graduates utilizing both individual-level and industry-level variables. We note that wage determination has multi-level structure in the sense that individual wage is influenced by individual-level variables (level-1) and industry-level (level-2) variables. Then, the assumption that individual wage is independent in the classical regression is violated. Therefore, this paper utilizes the hierarchical linear model (HLM). The major results are the followings. First, the multiple correspondence analysis including level-1 and 2 variables reveals that both level 1 and level 2 variables affects individual wages judging from the fact that the values of level 1 and level 2 variables differ across the different level of individual wage groups. Second, the decision tree analysis including level-1 and 2 variables shows that the most influential variable in wage determination is industry-level wage and the next is industry-level working hour, ages and sex in the decling order in. This suggests that the utilization of the HLM is appropriate since the characteristics of industry is important in determining the individual wage. Third, it is shown that the HLM model is the best compared to the other models which do not take level-1 and level-2 variables simultaneously into account.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.414-414
• /
• 2017

토양수분은 지면환경에서 일어나는 수문 및 에너지 순환을 이해하는 데 있어 중요한 기상인자이다. 토양수분 현장관측은 땅속에 매설된 센서에 의해 상당히 정확하게 이루어지만, 관측점 수가 충분치 않아 공간적 연속성을 확보하지 못하는 어려움이 존재한다. 이에 광역적 및 연속적 관측이 가능한 마이크로파 위성센서가 토양수분 정보 획득을 위한 보조수단으로서 그 중요성이 부각되고 있다. 마이크로파 위성센서는 구름 등 기상조건의 제약을 받지 않으며, 1978년 이래 현재까지 여러 위성에 의해 25 km 및 10 km 해상도의 전지구 토양수분자료가 생산되어 왔다. 마이크로파 센서를 이용한 토양수분자료는 동일지점에 대하여 하루 2회 정도 산출되므로 적절한 시간분해능을 가지지만, 공간해상도가 최고 10 km로서 지역규모의 수문분석에 적용하기에는 충분치 않다. 이러한 토양수분자료의 공간해상도 문제 해결을 위하여 다양한 지면환경요소를 활용한 통계적 다운스케일링이 대안으로 제시되었다. 최근의 선행연구들은 대부분 방정식을 이용한 결합모형을 통해 통계적 다운스케일링을 수행하였는데, 회귀식과 같은 선형결합뿐 아니라 신경망이나 기계학습 등의 비선형결합에서도, 불가피하게 발생할 수밖에 없는 잔차(residual)로 인하여 다운스케일링 전후의 공간분포 패턴이 달라져버리는 문제를 안고 있었다. 회귀분석에 잔차의 공간내삽을 결합시킨 회귀크리깅(regression kriging)은 잔차보정을 통해 이러한 문제를 해결함으로써 다운스케일링 전후의 공간분포 일관성을 보장하는 기법이다. 이 연구에서는 회귀크리깅을 이용하여 일자별 AMSR2(Advanced Microwave Scanning Radiometer 2) 토양수분 자료를 10 km에서 1 km 해상도로 다운스케일링하고, 다운스케일링 전후의 자료패턴 일관성을 평가한다. 지면온도(LST), 지면온도상승률(RR), 식생온도건조지수(TVDI)는 일자별로 DB를 구축하였고, 식생지수(NDVI), 수분지수(NDWI), 지면알베도(SA)는 8일 간격으로 DB를 구축하였다. 이러한 8일 간격의 자료를 일자별로 변환하기 위하여 큐빅스플라인(cubic spline)을 이용하여 시계열내삽을 수행하였다. 또한 상이한 공간해상도의 자료는 최근린법을 이용하여 다운스케일링 목표해상도인 1 km에 맞도록 변환하였다. 우선 저해상도 스케일에서 추정치를 산출하기 위해서는 저해상도 픽셀별로 이에 해당하는 복수의 고해상도 픽셀을 평균화하여 대응시켜야 하며, 이를 통해 6개의 설명변수(LST, RR, TVDI, NDVI, NDWI, SA)와 AMSR2 토양수분을 반응변수로 하는 다중회귀식을 도출하였다. 이식을 고해상도 스케일의 설명변수들에 적용하면 고해상도 토양수분 추정치가 산출되는데, 이때 추정치와 원자료의 차이에 해당하는 잔차에 대한 보정이 필요하다. 저해상도 스케일로 존재하는 잔차를 크리깅 공간내삽을 통해 고해상도로 변환한 후 이를 고해상도 추정치에 부가해주는 방식으로 잔차보정이 이루어짐으로써, 다운스케일링 전후의 자료패턴 일관성이 유지되는(r>0.95) 공간상세화된 토양수분 자료를 생산할 수 있다.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.6
• /
• pp.29-37
• /
• 2021

Since many geotechnical structures are constructed on a weathered granite layer, it is important to evaluate their characteristics. As a seismic design is the more important nowadays, the demands to estimate a shear wave velocity (V_S) based on acceptable methods are increasing. In this study, an empirical equation predicting V_S of the weathered granite layer is suggested based on the nonlinear multiple variable regression analysis whose independent variables are both SPT (Standard penetration test)-N₆₀ and chemical weathering index. It is concluded that the accuracy of the empirical equation estimating V_S of the weathered granite layer increases when it considers the chemical weathering index as an additional independent variable compared to the result of simple regression analysis using only N₆₀.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.2
• /
• pp.87-93
• /
• 2009

The labyrinth weir can be defined that the plane shape of overflow part is not straight line and is a kind of weir having overflow length increased by changing its plane shape. Recently, the labyrinth weir can be widely applied to various hydraulic facilities such as dam spillway, irrigation facilities, and canal structures by increasing precipitation. This study was performed to analyze the hydraulic characteristics according to triangle labyrinth weir using hydraulic model experiments and finally estimate the discharge coefficients for triangle labyrinth weirs. The formulae of discharge coefficient provided in this study, which make it feasible to calculate the overflow rate by a coefficient of correlation. sum of residuals, MAPE(Mean Absolute Percentage Error), are expected to be widely applied to design of hydraulic facilities such as dam spillway and irrigation system.

• Journal of Korean Society of Transportation
• /
• v.22 no.3 s.74
• /
• pp.109-125
• /
• 2004

In recent decades, microscopic simulation models have become powerful tools to analyze traffic flow on highways and to assist the investigation of level of service. The existing microscopic simulation models simulate an individual vehicle's speed based on a constant free-flow speed dominantly specified by users and driver's behavior models reflecting vehicle interactions, such as car following and lane changing. They set a single free-flow speed for a single vehicle on a given link and neglect to consider the effects of highway design elements to it in their internal simulation. Due to this, the existing models are limitted to provide with identical simulation results on both curved and tangent sections of highways. This paper presents a model developed to estimate the change of free-flow speeds based on highway design elements. Nine neural network models were trained based on the field data collected from seven different freeway curve sections and three different locations at each section to capture the percent changes of free-flow speeds: 100 m upstream of the point of curve (PC) and the middle of the curve. The model employing seven highway design elements as its input variables was selected as the best : radius of curve, length of curve, superelevation, the number of lanes, grade variations, and the approaching free-flow speed on 100 m upstream of PC. Tests showed that the free-flow speeds estimated by the proposed model were statistically identical to the ones from the field at 95% confidence level at each three different locations described above. The root mean square errors at the starting and the middle of curve section were 6.68 and 10.06, and the R-squares at these points were 0.77 and 0.65, respectively. It was concluded from the study that the proposed model would be one of the potential tools introducing the effects of highway design elements to free-flow speeds in simulation.

• Korean Journal of Psychosomatic Medicine
• /
• v.31 no.2
• /
• pp.155-164
• /
• 2023

Objectives : The aim of this study was to identify the factors affecting ideas of persecution in post-traumatic stress disorder (PTSD) patients who underwent Clinician-Administered PTSD Scale (CAPS) and Minnesota Multiphasic Personality Inventory-2 (MMPI-2). Methods : We retrospectively reviewed 116 patients who underwent CAPS and MMPI 2 between May 2013 and April 2020 at Veteran Health Service Medical Center. Based on the CAPS score, the patients were divided into the PTSD group (n=63, age: 58.16±17.84) and the trauma exposed without PTSD group (n=53, age: 67.34±12.05). After checking the correlation between Ideas of persecution, CAPS, and MMPI-2 scales, linear regression analysis was performed to identify the risk factors for clinically relevant symptoms. Results : The PTSD group showed significant differences in Schizophrenia, Ideas of persecution, Dysfunctional negative emotions, Aberrant Experiences, Psychoticism, Negative Emotionality/Neuroticism, Anxiety, Depression, and Anger scales compared to the trauma-exposed without PTSD group. When analyzing the correlation between Idea of persecution, CAPS and MMPI-2 scales, there was a strong association with most of the scales in MMPI-2 and Idea of persecution except Disconstraint. Multiple linear regression analysis performed in PTSD group identified that risk factors for Idea of persecution were Dysfunctional negative emotions and Anger scale. Conclusions : The PTSD group had increased idea of persecution compared to the trauma exposed without PTSD group. Dysfunctional negative emotions and anger may be risk factors for idea of persecution in trauma exposed population.