• The Bulletin of The Korean Astronomical Society
• /
• v.28 no.1
• /
• pp.78-78
• /
• 2003

• The Bulletin of The Korean Astronomical Society
• /
• v.28 no.1
• /
• pp.48-48
• /
• 2003

• The Bulletin of The Korean Astronomical Society
• /
• v.25 no.1
• /
• pp.21-21
• /
• 2000

• The KIPS Transactions:PartC
• /
• v.8C no.2
• /
• pp.198-206
• /
• 2001

· 21세기 도고 정보화 사회에서의 위성통신은 현존 위성 시스템에서 주로 제공하는 국가간 장 거리 전화, 방송 중계 서비스 등을 포함한 광범위한 대용량 디지털 멀티미디어 서비스 형태 의 트래픽을 처리하여 재분배하는 고성능, 다기능 정보통신으로 발전하고 있다. 이에 따라 전세계적으로 위성 수의 증가에 따른 위성궤도 부족과 주파수 자원의 고갈 등의 문제점을 야기시키게 되었다. 이를 해결하기 위해서는 기존의 단순 중계기의 역할뿐만 아니라, 위성탑 재 IF/RF 스위칭 기술, 기저대역 신호처리 기술, 다중 빔 안테나 기술 등을 포함한 OBP 탑 재 위성 시스템이 필요하게 된다. 따라서 본 논문에서는 기본적으로 멀티미디어 서비스를 제공하고 주파수 재사용 기법을 적용한 다중 스폿 빔을 송수신하는 차세대 OBP 탑재 위성 B-ISDN 중계망 접속 방식을 설계하고, 설계된 위성 B-ISDN 중계망 다중 접속 방식의 성 능을 평가하였다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.3
• /
• pp.194-201
• /
• 2014

This paper is able to be solved by improving degradation in multi-path environment by adjust beam pattern angle through modifying pulse phase of each antennas by using TRM (Transmitter Receiver Module). Beam Scanning Array Antenna, which is transmitter/receiver that improves degradation in multi-path environment without any signal distortion, is designed and manufactured. Beam Scanning Array Antenna should be able to send/receive signal at the antenna's longitudinal part without distortion and should not influences other systems. Also, it should include target detecting ability by beam steering.Dispersion characteristic of Beam Scanning Antenna, which is designed, is analysed by using fidelity, and steering and radar resolution performance is verified by using $1cm{\times}1cm$ sized target. To manufacture Beam Scanning Array Antenna, control board and GUI, which is able to control Vivaldi Antenna for IR-UWB, Tri-Band Wilkinson power divider, and TRM (Transmitter Receiver Module), is designed. Throughout this research, developed Beam Scanning UWB Array Antenna system is adoptable for radar application field. and time domain analysis techniques by using network analyser made the antenna characteristics analysis for setting up antenna more accurate. In addition, it makes beam width checking without difficulties.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.2
• /
• pp.358-365
• /
• 2007

In this paper, the effects of transmit beamforming on downlink performance in DS-CDMA communication systems are investigated. The uplink and downlink in FDD systems use different carrier frequencies. If the downlink uses the same weighting vectors as the uplink, the antenna beam for downlink is formed with certain DOA shift and it thus affects the beamforming gain. So, the impacts of different frequencies on the downlink beam patterns are studied. One possible algorithm to convert uplink beamforming weights to downlink, which is called frequency-calibrated processing, is also evaluated to reduce the degradation of downlink performance due to different frequencies. Under frequency selective channels, the downlink chooses a PUPW beamforming scheme when the uplink employs a PPPW vectors. To form a beam pattern for a PUPW after combining the downlink PPPWs converted from the uplink PPPWs, three approaches are studied. One method is to consider only one dominant path and thus obtain a single main-beam. In the others, multiple-beams weighted with the magnitudes of all paths and equally weighted with all paths are constructed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.9
• /
• pp.1-8
• /
• 2007

In this paper, the new beamforming is proposed for an orthogonal frequency division multiplexing(OFDM) system with multi-input multi-output(MIMO). Through the proposed Pre-FFT beamforming technique for MIMO-OFDM, the multibeams are formed toward each multi-transmitter antenna of the desired user. The proposed beamforming for MIMO-OFDM can reduce cochannel interference and get diversity gain in the multi-user environment. Therefore, the performance of MIMO-OFDM system is very improved. BER performance improvement of the proposed approach is investigated through computer simulation by applying it to MIMO-OFDM system in the multi-user environment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.5
• /
• pp.500-506
• /
• 2002

This paper presents a design of wide angle steering microstrip Rotman lens operating over broadband frequency range for Electronic Warfare equipments. It has a compact and simple structure which it is easy to manufacture repetitively. The lens is modelled as a 2-dimension planar circuit, the contour integral method is performed over entire lens contour and the transmission coefficients from 8 beam ports to 8 array ports are found. The measured results are well agreed with those of analysis. Prediction of the multibeam array pattern fed by linear array antenna shows $\pm$65$^{\circ}$ of beam steering and $\pm$5 dB insertion loss deviation over 3:1 frequency range.

• Information and Communications Magazine
• /
• v.32 no.5
• /
• pp.49-55
• /
• 2015

본 논문에서는 실제적인 다중 셀 하향링크 네트워크 중 하나인 간섭 브로드캐스트 채널에서 유망한 간섭 정렬 기술인 반복적 간섭 정렬 기술을 소개한다. 또한, 가정하는 네트워크에서 상향링크/하향링크 채널 사이의 채널 상호성을 활용함으로써 다중안테나(MIMO: multiple-input multiple-output) 다중셀 하향링크 네트워크를 위한 개선된 반복적 간섭 정렬 기술을 제안한다. 구체적으로, 제안한 기술은 다중사용자 MIMO 기반 반복적 간섭 정렬 알고리즘을 설계하기 위해 반복적 빔형성과 하향링크 간섭 정렬 이슈를 지능적으로 결합한다. 각 기지국에서는 전처리기를 설계하기 위해 두 개의 순차적인 빔형성 행렬을 사용하는데, 이는 간섭 누수로 불리는 타 셀 기지국으로부터 생성된 셀 간 간섭을 효율적으로 줄일 뿐만 아니라 같은 셀 안에서의 셀 내 간섭을 완벽히 제거가 가능하다. 송신 및 수신 빔형성 행렬은 수렴할 때까지 반복적으로 업데이트된다. 컴퓨터 모의실험을 통해 제안하는 간섭 정렬 기술이 기존 두 가지 반복적 간섭 정렬 기술과 비교하여 더 높은 합 용량을 나타냄을 보인다.

• Korean Journal of Optics and Photonics
• /
• v.7 no.3
• /
• pp.244-249
• /
• 1996

Multipass Ti:sapphire amplifier for the light source of DIAL was developed with an angular-multi-plexing, and the characteristics of output energy and spectra were investigated. As the characteristics of two-stage multipass amplifier, the maximum output energy was 22 mJ and the amplification gain was 20 dB on the wavelength of 790 nm. At that condition, output efficiency of the pumping energy was 18 percent. We obtained $0.15cm^{-1}$ (9.4 pm) as a spectral linewidth in the tuning range of 705~845 nm.