• Proceedings of the KSRS Conference
• /
• 2006.03a
• /
• pp.283-286
• /
• 2006

인공위성 영상자료를 이용하는 원격탐사는 지질, 환경, 지형도제작 등 다양한 분야에서 연구되고 있다. 특히 다중 및 초분광영상자료는 태양을 에너지원으로 하여 지표면 전자기파의 반응을 영상화하는 다중 및 초분광영상자료의 활용을 위해 분광반사율정보가 더욱 활발하게 이용될 것으로 기대된다. 본 연구에서는 고창지역에 대해 주기적으로 실시하고 있는 분광반사율 및 USGS 분광라이브러리 성과를 이용하여 다중파장대 위성영상자료인 ASTER와 분광반사율을 이용한 위성영상의 활용가능성 및 검보정의 가능성을 제시 하고자 한다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.17 no.4
• /
• pp.232-242
• /
• 2005

In this study, we get an analytical solution for the diffraction and multi-reflection around a semi-infinite breakwater and breakwaters with a gap by using the solution of Penney and Price (1952). We find analytical solutions for single- and multi-reflections around the breakwaters by assuming that the reflected waves are regarded to be those diffracting through a breakwater gap. On the basis of these solutions, it is possible to understand the wave diffraction with different cases of incident wave direction and breakwater layout. These solutions may help harbor engineers to understand the phenomena of diffraction and multi-reflections around the breakwaters. These solutions may also be used to evaluate the applicability of wave transformation models which are used in designing coastal structures.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.1
• /
• pp.6-12
• /
• 2010

Fiber optic sensor using fiber Bragg grating(FBG) probes is used for monitoring strain and temperature distributed on the wide surfaces of large structures. In this paper, in order to use many FBG probes in one optical fiber line, we propose a complex multiplexing technology which is composed of two techniques, one is time division multiplexing and another is wavelength division multiplexing. However, we only investigate the characteristics of time division multiplexing because FBG sensors basically can be operated by wavelength division multiplexing. We calculate the optimal reflectivities and the lengthwise location of five FBG probes in serial connection in order to obtain the unique reflected intensities from the FBG probes. We fabricate five FBG probes with the reflectivities of 13%, 16%, 25%, 40% and 80%, which are determined by the theoretical calculation, and observe the signal reflected from each FBG in the time domain from the experiment. There are differences between experimental and theoretical results caused by the signal noise and the differences of reflectivities of FBG probes. But the experimental results shows the reflected signals of five FBG probes which prove the availability of complex multiplexing.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_1
• /
• pp.969-979
• /
• 2018

This paper presents reflection symmetry of polarimetric SAR over the Amazon rainforest in terms of correlation coefficients between the pairs of HH- and HV-pol and VV- and VH-pol data by ALOS PALSAR. The reflection symmetry is defined as a non-zero correlation between HH- and HV-pol and VV- and VH-pol over natural distributed targets, and is a fundamental assumption for cross-talk calibration coefficient computation and for three-component decomposition for polarimetric SAR data. The Amazon rainforest is especially one of the common global reference sites for the reflection symmetry. The correlation coefficients for the pairs of reflection symmetry obtained in this study range from 0.018 to 0.097. The results imply that there exists a non-negligible dependency between co-pol and cross-pol in the distributed natural targets, and consequently the non-zero correlation must be considered as a potential contribution to errors of spaceborne SAR polarimetry to some extent.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.1
• /
• pp.121-128
• /
• 2016

Many studies are focused on image data and classifier for comparison or improvement of classification accuracy. Therefore studies are needed aspect of the training samples on supervised classification which depend on reference data or skill of analyst. This study tries to assess usability of field spectra as training samples on supervised classification. Classification accuracies of hyperspectral and multispectral images were assessed using training samples from image itself and field spectra, respectively. The results shown about 90% accuracy with training sample collected from image. Using field spectra as training sample, accuracy was decreased 10%p for hyperspectral image, and 20%p for multispectral image. Especially, some classes shown very low accuracies due to similar spectral characteristics on multispectral image. Therefore, field spectra might be used as training samples on classification of hyperspectral image, although it has limitation for multispectral image.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.1
• /
• pp.28-31
• /
• 2018

This paper investigates the ground reflection effect on the channel capacity of an orbital angular momentum (OAM) multi-mode transmission system that uses uniform circular array (UCA) antennas. The ground-reflected signals cause inter-mode interferences between the OAM modes, and lead to system performance degradation. The OAM multi-mode channel capacity severely degrades owing to the ground reflection as the transmission distance increases. Increasing the UCA height above the ground and using highly directive array elements can mitigate the ground reflection effect and increase the channel capacity.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1996.10a
• /
• pp.188-191
• /
• 1996

현재 국내에서는 단주기파의 항내에서의 다중반사를 고려할 수 있는 항내정온도 모형으로 Copeland(1985)의 모형을 개선한 한국해양연구소의 수치모형(한국해양연구소, 1987)과 Maruyama와 Kajima(1985)의 수치모형이 사용되고 있다. 이 수치모형들은 반무한방파제 후면의 회절이나 이안제 후면의 회절 등에 대해서는 수리실험이나 이론해와 비교되었으나 항만과 같이 다중반사가 발생하는 풍우에 대해서는 비교ㆍ검증이 부족하였다. (중략)

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.7
• /
• pp.918-925
• /
• 2017

Multiple reflections on exterior equipment with complex shape on naval ships cause unexpectedly high Radar Cross Section (RCS) distributions, and the directions of reradiated electromagnetic waves are hard to predict. Therefore, the optimum arrangement of exterior equipments should be considered according to the Radar Absorbing Structure (RAS) method. In this paper, the optimum arrangement for exterior equipments was determined to reduce multiple reflections and RCS even with complex shapes. The sequential descending arrangement method was used to establish an optimum arrangement algorithm. An LCS-2 type model was selected for optimum exterior equipment arrangements. In order to reduce computational cost, RCS distributions and multiple reflection path analysis of exterior equipments was carried out to select exterior equipments for optimum arrangement, and an optimum arrangement was determined to find positions with minimum RCS values. Also, the RCS reduction effect was analyzed using detectable radar range.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.04a
• /
• pp.546-549
• /
• 2010

RGB 영상의 색 재현성과 조건등색 등의 한계를 개선하기 위해 다중스펙트럼 영상을 활용하는 연구가 활발히 진행되고 있다. 다중스펙트럼 영상을 측정하기 위해서 흑백카메라와 3 개 이상의 컬러 필터들을 이용한다. 본 연구에서는 LCTF 를 사용하여 400nm 에서 720nm 까지 10nm 단위로 33 개의 필터를 사용한다. 이러한 다중스펙트럼 영상 측정 시스템의 특성화를 수행하기 위해 컬러체커뿐만 아니라 광원정보까지 이용하며, 사물의 스펙트럼 반사율도 추정한다. 따라서 분광방사계 보다 빠르게 영상 기반으로 스펙트럼 반사율을 측정할 수 있다. 다양한 광원 조건에서 특성화를 수행하며, 매번 레퍼런스 차트를 측정할 필요 없이 간단히 광원만 측정해도 되는 것을 보인다. 또한 전경영상에서 원하는 영역을 광원환경이 다른 배경 영상에 합성할 때, 자연스러운 사물의 색 변환이 가능하여 보다 실제에 가까운 합성 영상을 생성한다.

• Journal of KIISE:Software and Applications
• /
• v.37 no.2
• /
• pp.104-109
• /
• 2010

The lighting reflection is a common problem in image analysis and causes the many difficulties to extract distinct features in related fields. Furthermore, the problem grows in the rainy night. In this paper, we aim to remove light reflection effects and reconstruct a road surface without lighting reflections in order to extract distinct features. The proposed method utilizes a 3D analysis based on a multiple geometry using captured images, with which we can combine each reflected areas; that is, we can remove lighting reflection effects and reconstruct the surface. At first, the regions of lighting sources and reflected surfaces are extracted by local maxima based on vertically projected intensity-histograms. After that, a fundamental matrix and homography matrix among multiple images are calculated by corresponding points in each image. Finally, we combine each surface by selecting minimum value among multiple images and replace it on a target image. The proposed method can reduces lighting reflection effects and the property on the surface is not lost. While the experimental results with collected data shows plausible performance comparing to the speed, reflection-overlapping areas which can not be reconstructed remain in the result. In order to solve this problem, a new reflection model needs to be constructed.