• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.10
• /
• pp.674-683
• /
• 2014

Multi-hop wireless networks has become common phenomenon according to a development of wireless communications and an increase of usage of wireless link. ARQ is one of the common protocols in link layer and can improve a link performance recovering packet loss in wireless link. However, ARQ cannot sufficient to assure a end-to-end performance because ARQ only manages the ARQ's own link. In this paper, we propose a new retransmission persistence for ARQ in multi-hop wireless network to satisfy the end-to-end performance. The proposed scheme can aware a bottleneck link according to the exchange of link information between ARQs and can support the end-to-end performance by managing a retransmission persistence. OPNET simulator is used to evaluate the performance of the proposed scheme and results show that proposed scheme can improve the end-to-end performance with satisfying a requirement of entire wireless section.

• Information and Communications Magazine
• /
• v.22 no.9
• /
• pp.175-186
• /
• 2005

향후 수년 내에 흠, 오피스 및 핫스팟 영역에서 초고속 멀티미디어의 서비스 수요가 폭발적으로 증가할 것으로 전망됨에 따라 IEEE 802.11에서는 200-500Mbps급의 차세대 초고속 무선랜 표준으로서 IEEE 802.11n의 표준안을 제정하는 작업을 진행하고 있다. 새로운 표준에는 무선통신의 다양한 기술들이 표준으로 채택될 전망이다. 논의되고 있는 기술들로는 물리계층에서의 다중 안테나의 사용, 송신 빔 형성, 듀얼 밴드 그리고 LDPC (Low Density Parity Check) 등의 기술과 MAC (Media Access Control) 계층에서의 집합 전송, 블록 전송, 링크 적응 기법 등의 채택이 논의되고 있다. 기존의 무선랜 시스템에서 널리 사용되어온 IEEE 802.11a/b/g와의 호환성을 보장한다. 또한 차세대 무선랜은 차량용 통신 장치를 위한 고속 이동성을 보장하는 표준인 IEEE 802.11p에 대한 논의도 함께 이루어지고 있다. 본 고에서는 표준회의에서 논의되고 있는 후보 기술들과 차세대 무선랜의 기술동향을 살펴본다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.366-367
• /
• 2018

최근 해양사고를 예방하기 위한 선박 모니터링, 최적항로 선정, 해사안전정보 제공 등과 같은 서비스에 대한 요구가 증가됨에 따라 선박 간 혹은 선박과 육상 간 데이터 통신의 중요성이 대두되고 있다. 그러나, 기존 해상 환경에서의 통신은 위성을 제외하고는 VHF/MF/HF 등의 지상파 기반 시스템에 의존하여 왔으며, 낮은 전송 속도로 인해 신규 서비스의 높은 통신속도 요구 보장에 한계가 있다. 따라서, 해상 환경에서 고속 통신 서비스를 제공하기 위해 WiMAX, LTE 등과 같은 육상 통신시스템을 해상으로 확대하고, 통신 커버리지 확장을 위해 이기종 네트워크 간 핸드오버 및 다중홉 네트워크를 구성하려는 많은 연구가 수행되고 있다. 본 논문에서는 기존 문헌에서 제안하는 해상 서비스들의 요구사항을 식별하고 이를 지원하기 위한 해상무선통신망 기술들을 통신 성능 관점에서 비교하여 초고속해상무선통신망 구축의 기초 요구자료로 활용하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.1044-1047
• /
• 2013

Wireless Mesh Network (WMN) provides effective Internet Service accesses to users by utilizing multi-rate and multi-channel. In multi-rate networks, the Rate Anomaly (RA) problem occurs, the problem that low-rate link degrades the performance of high-rate link. In this paper we propose Rate Gap Minimum Channel Assignment (RGM-CA) protocol that select the minimal rate gap parent node and assign the channel in order to mitigates the rate anomaly problem. RDM-CA protocol is efficient because it consider rate anomaly, channel diversity and node connectivity.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.598-599
• /
• 2015

For the wireless mesh networks, efficient routing protocol is required to transmit data from source to destination node through multi-hop transmission. Multipath routing enable the stable data transmission even in the case of traffic congestion or unstable link. In this paper, we propose partial multipath routing which does not make a full multipath but partial for some parts of unstable links. This partial multipath routing reduce the number of nodes for routing and minimized the required power.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1917-1924
• /
• 2015

Efficient routing algorithm is required to transmit data from source to destination by multi-hop transmission in wireless sensor networks. In the multi-hop transmission, multipath routing can be one of the solutions to cope with the traffic congestion and unstable link condition. In this paper, we propose partial multipath routing which does not establish a secondary full routing path but a partial multipath to complement some poor links, and it can enable stable data transmission and reduce the number of nodes in routing path and the required total power compared with conventional multipath routing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3A
• /
• pp.286-295
• /
• 2008

In this paper, we consider the use of orthogonal multiple beams (OMBs) to simultaneously achieve multi-user diversity and multiplexing gain in a packet-based wireless system. Previous OMB scheme considers the use of a fixed number of multiple beams equal to the number of transmit antennas. However, unless the number of active users is sufficiently large, the use of a fixed number of multiple beams may not provide desired performance due to the interference signal transmitted through other beams, being even worse than the use of a single beam. To alleviate this problem, we consider the adjustment of the number of beams in use to maximize the spectral efficiency according to the operating condition. Simulation results show the validity of the proposed scheme.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.552-555
• /
• 2010

In this paper, we propose a context-aware system using wireless multi sensor module to monitor the state for industrial factory environment. Wireless multi sensor module combines sensing values which are collected from each acceleration, pressure, temperature and gas sensors. Moreover, it delivers this data to server after being encoded by RS code. Thereafter, RS decoder decodes the values that are received from wireless multi sensor module and fixes errors which occur in wireless communication. Based on decoded data, context-aware algorithm sets critical range and compares it to the sensing values, if the sensing values are out of the range, an event occurs by the algorithm. At the same time, if there is another sensing value which is out of the range for standby time T seconds, the algorithm orders 3 steps-alarm to occur depending on each situation. Through this system, it becomes eventually possible to monitor machines' condition effectively. From the simulation, we confirm that this system is efficient to status monitoring of industrial automation equipment.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.3
• /
• pp.319-325
• /
• 2015

Remarkable advances in wireless communication technology have enabled communications among people who are far away from each other. In recent, the needs of local area voice communication using a wireless system based on low-cost and simple hardware are rapidly rising. However, since these applications require that the multi-users communicate on the same wireless channel in a small area, the existing voice technologies are not suitable for directly applying to these applications. Therefore, in this paper I propose a novel idea enabling multi-user voice communication. In particular, as a short range wireless solution, I employ the IEEE 802.15.4 based on low power and low cost. However, since originally the standard is not developed for voice communication, we extend the original scheme to be suitable for the voice communication by utilizing the extended concept of GTS. The capacity and validity of the proposed scheme are evaluated through quantitative analysis in various voice compression rates.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7C
• /
• pp.475-480
• /
• 2011

Ultra-wideband (UWB) signal energy spreads over multiple correlator outputs due to rich multipaths, making the output of each correlator have only a small portion of the total energy. Thus, in the proposed two-stage UWB signal detection scheme for cognitive radio communication systems, the decision variable is formed by combining multiple correlator outputs, making it possible to collect the signal energy spread by the multipaths, Simulation results show that the proposed scheme can provide a gain of about 0.6 dB over the conventional schemes in various UWB channel environments.