• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.6
• /
• pp.528-534
• /
• 2013

The energy consumption problem should be taken into consideration in wireless sensor network. Many studies have been proposed to address the energy consumption and delay problem. In this paper, we propose BISA(Bio-inspired Scheduling Algorithm) to reduce the energy consumption and delay in wireless sensor networks based on biological system. BISA investigates energy-efficient routing path and minimizes the energy consumption and delay using multi-channel for data transmission by multiplexing data transmission path. Through simulation, we confirm that the proposed scheme guarantees the efficient energy consumption and delay requirement.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.7
• /
• pp.97-103
• /
• 2009

This paper proposes efficient routing scheme named MP-DD(MultiPath-Direct Diffusion) which is simple enough to be applicable to the wireless sensor networks. Conventional DD uses only one optimal path, therefore it consumes more energy of specific nodes. MP-DD uses multiple path and has a information of hop upstream node in the direction of the base-station is determined which are obtainable via the process of self-organization of the network. Simulation results show the feasibility of the simple routing schemes for the sensor networks.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.10
• /
• pp.1957-1963
• /
• 2017

This paper has proposed a new-type groundwater auto-monitoring system based on Multi-Sensor Device. The system adopted Multi-Sensor Device as host computer of data acquisition, used Windows Mobile which was prevalent operation system of Multi-Sensor Device. It adopted serial port CAN and RS485 as the communication interface between goundwater sensor Device and monitor host machine and utilized serial-linked multi-sensor design to measure effectively according to the depth of groundwater. We present a design for a groundwater monitoring system based on a network of wirelessly linked sensors. The proposed solution will enable groundwater researchers and decision makers to have quick access to the groundwater data with less effort and cost. Though our design is initially meant for groundwater monitoring, it can be easily adapted to other fields of environmental monitoring.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.2
• /
• pp.283-288
• /
• 2015

The possible erroneous output data of the sensor nodes can cause the performance limit or the degradation of the reliability in the whole wireless sensor networks(WSN). In this paper, we propose a new sensor node scheme with multiple sensors and a new fault diagnostic algorithm. The algorithm can increase the reliability of the whole WSNs by utilizing measurements of the multiple sensors on the node and by determining the validity of the date by comparing the value of each sensor. It can increase the cost and complexity of the node, but is suitable for the area where the high reliability is critical.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.5
• /
• pp.419-428
• /
• 2015

Multipath routing technique is recognized as one of the effective approaches to improve the reliability of data forwarding. However, the traditional multipath routing focuses only on how many paths are needed to ensure a desired reliability. For this purpose, the protocols construct additional paths and thus cause significant energy consumption. These problems have motivated the study for the energy-efficient and reliable data forwarding. Thus, this paper proposes an energy-efficient cooperative multipath routing protocol with a small number of paths based on an inter path communication. The inter path communication (namely, cooperative multipath routing) in the proposed protocol helps to reinforce the multipath reliability and reduce the use of network resources. In addition, the proposed protocol provides a reliable end-to-end transmission time by using a transmission recovery method based on the local decision for the path or transmission failures.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.5
• /
• pp.179-186
• /
• 2008

In proportion as the growth of the wireless sensor network applications, we need for more accuracy wireless channel information. In the case of indoor or outdoor wireless sensor networks, multipath propagation causes severe problems in terms of fading. Therefore, a path-loss model for multipath environment is required to optimize communication systems. This paper deals with log-normal path loss modeling of the indoor 2.4 GHz channel. We measured variation of the received signal strength between the sender and receiver of which separation was increased from 1 to 30m. The path-loss exponent and the standard deviation of wireless channel were determined by fitting of the measured data. By using the PRR(Packet Reception Rate) of this model. Wireless sensor channel is defined CR(Connect Region), DR(Disconnected Region). In order to verify the characteristics of wireless channel, we performed simulations and experiments. We demonstrated that connection ranges are 24m in indoor, and 14m in outdoor.

• The Journal of the Korea Contents Association
• /
• v.12 no.4
• /
• pp.60-68
• /
• 2012

In recent years, the requirements on the high quality environment monitoring by using the sensor nodes which can handle the multimedia data in WSN have been increased. However, because the volume of multimedia data is tremendous, the limited bandwidth of a wireless channel may incur the bottleneck of a system. To solve such a problem, most of the existing distributed multi-path routing protocols based on multimedia data just focused on overcoming the limited bandwidth in order to enhance the energy efficiency and the transmission rate. However, because the existing methods can not apply a key-based technique to encrypt the multimedia data, they are very weak for the security. In this paper, we propose a secure disjointed multipath routing scheme for multimedia data transmission. Since our proposed scheme divides multimedia data(eg. image) into pixels and sends them through disjointed multipath routing, it can provide security to the whole network without using the key-based method. Our experimental results show that our proposed scheme reduces about 10% the amount of the energy consumption and about 65% the amount of the missed data packets caused by malicious nodes over the existing methods on average.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.1297-1299
• /
• 2010

무선 통신에서는 무선 통신의 브로드캐스트한 특성으로 데이터의 기밀성 유지를 위한 암호화가 매우 중요하다. 특히 무선 센서 네트워크(WSN - Wireless Sensor Network)의 경우 일반적인 PC와는 다르게 다양한 환경에 위치할 수 있어 공격자에게 더 쉽게 노출 될 수 있는 문제점을 가지고 있다. 이런 환경에서 미리 저장된 해쉬 함수나 비밀 값에 의존한 키 분배를 할 경우 저장된 값이 노출될 경우 심각한 문제를 초래하게 된다. 그리고 D-H 키 분배 알고리즘의 경우 키 값을 안전하게 도출을 할 수 있지만 키를 도출한 대상에 대한 인증의 부재와 멀티 홉 환경에서 중간자 공격에 취약한 문제점을 드러내고 있다. 본 논문에서는 이런 문제를 해결하기위해 기존 연구를 응용하여 멀티 홉 환경에서 무선 통신의 특성을 이용한 비밀값 공유와 제 3의 노드를 이용한 간단한 인증이 가능한 기법을 제안한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12B
• /
• pp.1259-1266
• /
• 2010

M2M communication is considered as a key enabling technology to monitor the status of objects, vehicles, humans through auto-configuring wireless networks. In M2M network, there are active research activities to enhance the reliability on data while being collected from wireless sensor network. The reliability issue becomes more important as wireless sensor networks carry multimedia data, which is delay sensitive. The interference caused by the adjacent neighbor sensor nodes is a major factor in network performance degradation, which becomes more severe in multi-hop routing environment. In this paper, we propose inerfernce-free multipath routing protocol for M2M wireless network for enhancement of packet delay performance. The simulation results show that the proposed routing algorithm outperforms the existing routing protocols in terms of packet delay and throughput.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.10
• /
• pp.876-884
• /
• 2012

This paper introduces two multi-hop delay factors which can be caused by conventional TDMA scheduling; queueing delay and delay by random link scheduling, and proposes a new sequential scheduling scheme to resolve these two factors. We also simulate the TDMA network with the proposed link scheduling scheme and compare it with conventional(random) link scheduling scheme in terms of end-to-end packet transmission delay. From the simulation results, the more the average hop distance increases, the more the difference of the delay performance of both scheduling schemes increases. When the average number of hops is 2.66, 4.1, 4.75, and 6.3, the proposed sequential scheduling scheme reduces the average end-to-end delay by about 22%, 36%, 48%, and 55% respectively when compared to the random scheduling scheme.