• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.302-303
• /
• 2000

Edge emitting 레이저 다이오드의 전형적인 모양은 그림 1과 같다. 반도체 레이저는 다른 종류의 레이저에 비하여 체적이 매우 작으며 제조 단가가 저렴하고 대량생산이 용이할 뿐 아니라 수 mA의 전류만 흘리면 레이저가 되는 이점이 있으므로 광통신용 응용 외에도 바코드 리더, 비디오 디스크, 오디오 디스크, 레이저 프린터, 포인터 등에 폭넓게 이용된다. 하지만 다른 레이저들에 비하여 발산각이 큰 편인데 p-n 접합에 나란한 방향과 수직인 방향의 발산각은 각각 λ/w와 λ/l 로 타원모양을 갖게 된다$^{(1)}$ . LD의 발광 부분은 폭이 작으므로 일정한 높이에서 정확한 세기분포를 측정하기 위하여 그림 2와 같이 본 연구실에서 제작한 NSOM (Near-filed Scanning Optical Microscope) 구조를 이용한다$^{(2)}$ . (중략)

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.1
• /
• pp.77-87
• /
• 2012

In this paper, the method and its effectiveness to decrease the uneven wear of the brake pad were proposed. A finite element analysis was performed to analyze the pressure distributions on the contact surfaces. The optimum brake pad shape was determined by a robust design using the Taguchi method. The effectiveness of the optimum design was clarified by the wear tests with a dynamometer.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.1
• /
• pp.8-19
• /
• 2014

In this paper, a robust design of the back-plate of the brake pad to decrease the uneven wear of the pad was studied. A finite element analysis was performed to analyze the pressure distributions on the contact surfaces. Optimized back-plate shape of the brake pad was determined using the Taguchi method. The effectiveness of the robust design was clarified by the wear tests with a dynamometer.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.04b
• /
• pp.53-57
• /
• 1993

굽힘 가공(Bending Process)은 원통형의 다이(die)등을 이용하여 평판형 금속 판재에 프레스 하중을 가하여 임의의 굽 힘 형상을 영구적으로 만드는 가공법으로 소성가공을 하고 있는 대부분의 산업현장에서 널리 쓰이는 가공법 중의 하 나이다. 본 연구에서는 특수 목적이 대형구조물 혹은 대형차체에 주로 사용되어지는 고장력 후판을 대상으로 하여 여러종류의 굽힘각도에 따른 가공성 시험을 수행하고, 굽힘가공부위에서 채취한 시험편에 대한 기계적 물성시험을 통하 여 가공전의 모재와 비교, 분석하므로써 적절한 굽힘 가공조건 및 굽힘가공이 가능한 허용각도등을 결정할 수 있도록 하였다.

• Journal of Korean Library and Information Science Society
• /
• v.53 no.2
• /
• pp.265-284
• /
• 2022

This study applied dynamic topic modeling on titles and abstracts of 55,442 academic papers in 85 SSCI journals from 2001 to 2020 in order to analyze research topic trend in library and information science. The analysis revealed four major themes of library management, informatics, library service, and library system in 10 major topics. The results also showed subtopics in information science and library management topic areas to change over time, while library service remained stable over 20 years to establish itself as a robust topic. In addition, medical information emerged as a significant sub-topic of informatics, thus exemplifying the interdisciplinary characteristics of library and information science field.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.4
• /
• pp.297-305
• /
• 2009

Ores of the Jeonnam pyrophyllite province mainly consist of not only pyrophyllite but also kaolinite, and they usually contain minor amounts of muscovite and quartz. We usually call them as porcelaneous stones which usually show lower grade characteristics in the viewpoint of Korean nonmetallic industries. Mineralogical studies for the ores and their intimate formations revealed that another kind of clay minerals could have been produced from the volcanic sediments with similar ages and compositions. Corundum is commoner than the diaspore in the pyrophyllite deposits, and so diaspore can be regarded as one of temporary minerals from which corundum would be finally formed. Kaolinite deposits contain neither diaspore nor corundum, but alunites produced by an advanced argillic alteration are often observed in the upper portions of the kaolin ores. The lowest formation interbedded with pyrophyllite and/or kaolinite ores usually contain purple tuff bed on the uppermost part, and in ascending order, siliceous formation, fine ash tuff and lapillistone are found in the study areas. As ages are becoming younger, amounts of pyrophyllite and kaolinite are radically decreased, or disappeared completely. On the other hand, content of muscovite is slightly increased, and those of plagioclase feldspars and quartz are found to have been preserved from the original rocks during alteration process. Most of ore bodies show rather well bedded formations which are easily discernable in the outcrops, but more effective discremination is desirable where rather massive ores exist. Siliceous beds and purple tuff ones on the upper part of ore bodies would be useful as marker horizons or key beds which have distinct lithologies and extensions.

• Journal of Power System Engineering
• /
• v.9 no.4
• /
• pp.58-64
• /
• 2005

주파수 영역 민감도 해석법은 동적 시스템의 전달함수에 대한 설계 파라미터의 변화에 의한 효과를 파악하기 위해 사용되어 왔으며, 이때의 민감도 함수는 시스템 설계 파라미터에 대한 시스템 전달 함수의 편미분 값이다. 일반적으로 종래의 주파수 영역 민감도 해석은 직접 미분법이나 라플라스 변환이 사용되어 왔다. 라플라스 변환을 사용하는 경우에 시스템의 차수가 증가할수록 역행렬 조작은 매우 많은 시간을 필요로 하며 또한 어려운 작업이다. 본논문에서는 이러한 다점을 보완하기 위하여 푸리에변환을 이용한 민감도 기법을 제시하였다. 파라미터의 변화에 대한 진폭-주파수 특성의 민감도 해석을 간단한 2자유도 모델과 로터 다이나믹 시스템에 적용하였다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.8 no.5
• /
• pp.27-39
• /
• 1971

It is described in this paper that a newly developed quartz frequency modulator using V. V. C. diode would be more suitable for mobile FM portable transmitter, than conventional reactance modulator because of less need for multiplier stages in the former type. It is realized by theoretical and experimental results what is the most optimum relationship between the quartz oscillator, V. V. C. diode and coupled circuit elements in order to get the desired modulation linearity and carrier frequency stability depending upon the variation of circumference temperature and suplied source voltages.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.2
• /
• pp.114-125
• /
• 1993

In the present study the newly developed CAD/CAM system is applied to the process of the molding design, machining for mini-sized and precise processive die, and the production of press-stamped parts. When the design of a die was completed by means of CAD, wire cut NC data were generated with the aid of a design drawing in the CAD system and then inputed into the wire cut machine, and with the aid of a hole chart which had been made for this purpose, all the data were classified into the categories of CNC milling, jig boring, jig grinding, and machine center, and then developing a program of generating NC data, errors in process were reduced and programming time was shortened. The program was developed by using Autolisp language which was built-in the CAD, and realizing the intergation of designing a die, generating and processing NC data directly by a designer, designing time and machinery processing time were shorted. And the traditionally required working time for design. NC program required 6 days of work becomes 4 days of work by using the developed CAD/CAM system so that the efficiency shows 150% of the reduction working time. The prpgram of the design of the automation a progressive die mold was developed in the PC-Class Autocad system, therefore development expense could be reduced, and the integration of the CAD/CAM of the progressive die mold with the standard DB being built could be realized.

• 한국체육학회지인문사회과학편
• /
• v.55 no.6
• /
• pp.551-560
• /
• 2016

The purpose of this study was to explore how SCUBA diving instructors' perception on their divers affects the buddy selection process in SCUBA diving clubs. For the purpose of this study, 6 people who have more than 5 year experiences and have been working as instructor in scuba diving clubs were selected as research participants. The results are as follows. First, they perceived necessity of buddy selection through awareness of importance of buddy through education and through partner perception to overcome perceived danger. Second, when selecting a buddy, they established standards according to level whether they have a rescue diver license and secured standards through new sense of value. Third, buddy selection determinants were interaction between buddies, mutual trust and realization of buddy's role. As such, a SCUBA diver should select other buddy to perform pair diving and buddy is selected based on relationship such as mutual communication, mutual trust and belief. When they perform buddy's role comprehensively based on mutual relationship with buddy, continuous relationship as buddies can be built.