• 한국주조공학회지
• /
• 제42권4호
• /
• pp.255-260
• /
• 2022

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.769-773
• /
• 2002

The die easting process was used to manufacture a motor housing for automobile. Specially automobile parts were required light and high strength. Therefore simulations have been carried out die casting process of motor housing. In this paper, we investigated about characteristics of the die casted motor housing with HPDC(High Pressure Die Casting) process. Also the MAGMAsoft was used as computer simulation code and used material was ADC12(Aluminum Die Casting Alloy). We present the results of filling behavior and solidification process of a motor housing cast. The analysis results obtained about filling behavior and solidification of cast showed good agreement with test results.

• 한국기계가공학회지
• /
• 제14권5호
• /
• pp.36-41
• /
• 2015

In this paper, research on the mold design of motor housing produced by the HPDC process was conducted using computer simulations and experiments. Recently, automobile parts have been required to be light and have high strength. The die casting process was used to manufacture automotive motor housings. In the die casting process, the control of casting defects is very important. However, it has usually depended on the experience of the foundry engineer. For the analysis of the manufacturing process of motor housing, the finite element method is applied. Through the simulations using commercial software, the filling pattern and product defects could be confirmed. The analysis results obtained from the filling behavior of the casting process agreed with the experimental results. The computer simulation results of filling behavior were reflected in the optimal mold design of motor housing.

• 한국정밀공학회지
• /
• 제19권10호
• /
• pp.77-83
• /
• 2002

Magnesium alloys casting are gaining increased acceptance in the automotive and electronic industeries and die casting is the most efficient method of manufacturing such mass produced parts. This study has been investigated the microstructures and mechanical properties of Mg-9Al-lZn alloy fabricated by die casting process for development of air bag case. The microstructure of die casted specimen were composed of pro-eutectic magnesium solid solution and $\beta$(Mg17Al12) precipitates. The tensile strength of as-fabricated Mg-9Al-lZn alloy revealed 231.4MPa. It was found that Mg-9Al-lZn alloy have good corrosion resistance in electrochemical polarization test.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.43.1-43.1
• /
• 2009

다이캐스팅과 같이 가압 사출방식을 이용한 제품 성형 공정에서 관심의 대상이 되어왔던 연구 주제 중 하나는 어떻게 하면 금형 내에 충진되는 용탕의 유동을 층류성으로 제어할 수 있을까 하는 문제이다. 그러나 다이캐스팅 공정에서 일반적인 용탕의 사출속도로는 그 유동 특성을 제어하기가 거의 불가능하다. 이러한 사출속도의 설정 및 게이트의 형상설계를 하는데 있어서 대부분 경험적인 자료를 이용하고 있어 공정의 효율성을 극대화하고 있지 못한 실정이다. 본 연구에서는 용융 마그네슘합금이 금형내에 충진 될 때 유체의 유입속도 및 탕구형상이 유동에 미치는 영향을 전산유체역학을 이용하여 충진 및 응고해석을 하였고, 예견되는 제품의 결함 및 결함제어 가능성을 진단함으로써 개선방안을 제안하고 최종적으로 금형설계 제작에 반영하여 실제 주조된 제품을 해석결과와 비교하였다. 또한, 본 연구에서 주조된 전자기부품의 미세조직을 관찰하고, 인장강도 및 파괴 특성을 관찰 하였다. 실험결과 빠른 응고속도에 따른 조직의 미세화 효과로 항복강도, 인장강도 그리고 경도 특성이 우수하게 관찰되었다.

• 한국정밀공학회지
• /
• 제18권12호
• /
• pp.185-191
• /
• 2001

The aluminum die-casting technique has been widely used to manufacture a rotor in motor industry because of its highly productivity, even though it sometime causes the various type of defects in the rotor, such as shrinkage, cavity, blow holes etc. which results in the decrease of the efficiency of system. Therefore the development of reliable technique to detect the flaws in the rotor is strongly needed not only to control quality assurance but to improve its efficiency. In this study, the wide variety of ultrasonic techniques have been applied to detect the flaws in the rotor and then to discuss the detectibility of the flaw and the applicability for NDE tool in the aluminum die-casting rotor.

• 한국주조공학회지
• /
• 제24권4호
• /
• pp.194-201
• /
• 2004

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.367-368
• /
• 2013

• 한국주조공학회지
• /
• 제23권4호
• /
• pp.171-178
• /
• 2003

• 한국주조공학회지
• /
• 제31권3호
• /
• pp.111-115
• /
• 2011