• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.2
• /
• pp.72-77
• /
• 2016

Airplane reservoirs made of Al7075 are coated with an anodizing layer to maintain precision, air tightness and corrosion resistance. It is commonly required that the inner surface roughness of the reservoir be less than an average $0.2{\mu}m$ to maintain stable oil pressure. Even though precision polishing is necessary to achieve this quality it is not easy. Inner surface roughness is not uniform and the quality of the product is irregular because most of the work is done by hand. The purpose of this study is to design an exclusive polishing machine and to determine the standard cutting condition and polishing condition necessary for good inner surface roughness and to improve workefficiency.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.4
• /
• pp.311-322
• /
• 2014

Concrete filled tubular structure should be installed diaphragms for moment connection. However internal and through diaphragm should be special welded when connected to column tube. The other hand, that has become increase of stress concentration and extend of construction error. Therefore, In this study the seismic performance of beam to column connections with External Diaphragms and implement cycle loading experiment. we had evaluated seismic performance with mentioned experiment which is concrete filled or not, variable shapes, to be welded or not of diaphragm. Also, formula of strength of external diaphragm was analyzed and looked into adequacy with regard to formula of tension strength.

• Proceedings of the KAIS Fall Conference
• /
• 2002.05a
• /
• pp.59-64
• /
• 2002

The effect of the numbers of processing on the punch and surface roughness of die block in the W-EDM, which is frequently used to manufacture parts of press die is studied. W-EDM equipment(Sodic A500H), the application of which has increased for its precision, is used in the process three times. To inspect the roughness of the three-time-processed dimension of the punch and the die, the surface roughness measuring instrument(System 5000 of Federal) is used.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.96-100
• /
• 1992

각종 금형 중 사출금형과 프레스 금형이 전체의 80~90%를 차지하고 있으며, 이들 금형을 가공할 때 방전가공이 주로 이용되되 있다. 금형재료 중에서 합금공구강(STD 11)은 열처리하였을 때 경도가 매우 커서 프레스 금형의 다이오와 펀치 등에 널리 사용되고 있다. 이것은 Wire-EDM 이나 Die Sinking EMD으로 가공하고 있다. 따라서 본 연구에서 프레스 금형의 다이와 펀치 등에 널리 사용되는 열처리된 STD11을 사용하여 가공 제특성에 영향을 주는 가공조건, 즉 방전전류펄스폭 및 방전전류파 고치를 변화시켜 이에 따른 공작물 가공량, 전극소모비, 표면조도, 가공단면의 열변질층 및 경도 변화 등 방전가공비의 성상을 조사하여 STD11의 최적의 방전가공조건을 찾고자 하는 것을 목적으로 하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1990.04a
• /
• pp.67-75
• /
• 1990

세라믹스는 우수한 기계적, 전기적, 화학적성질로 인하여 여러방면에서 점점 기대가 높아가 고 있다. 그럼에도 불구하고, 그 이용 범위나, 응용이 늦은 것은 가공성에 문제가 있기 때문 이라 해도 과언이 아닐 것이다. 세라믹스의 가공법으로서는 주로 다이야몬드 지립을 이용한 연삭, 절단, 래핑등이 행하여지고 있지만 이러한 방법은 가공 능률이낮기 때문에 생산성에 많은 문제를 안고 있다. 본 연구에서는 다이야몬드공구와 산화물계 A1$_{2}$0$_{3}$를 피삭재로 하여 다양한 절삭조건과 공구의 형상을 변화시켜 선삭 실험을 통하여 절삭력의 크기, 칩의 형태, 공작물의 형상, 표면조도 및 공구마멸등 절삭의 특성을 검토 하였으며 절삭에 의한 파인세라믹 스의 가공 가능성을 확인하고자 한다.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.405-406
• /
• 2013

본 논문에서는 MOSFET 바디 다이오드 특성에 의해 양방향 절연형 컨버터의 2차 측 브리지 구조에서 나타나는 Leg Fault 현상을 분석한다. 중/고용량 양방향 절연형 컨버터의 동작에 있어 MOSFET 바디 다이오드로 구성된 정류기가 가지는 특성이 미치는 영향을 분석하고, 특성의 변화를 제시한다. 또한 분석 및 비교 시험의 결과를 통하여 바디 다이오드로 인한 Leg Fault 발생 조건을 보이고, 이를 토대로 양방향 절연형 컨버터의 안정적인 동작을 위해 바디 다이오드 특성을 고려한 MOSFET 선정 방향을 제시한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.420-425
• /
• 2010

In the process of warm forging, billet is heated up to $800^{\circ}C$ and located in the upper part of die block impression. The scattered oxidized scale may cause workers burn and shortening of die life sticking to the die block impression. The separating materials sprayed in die block cause harmful dust, harmful mist, fume, and bad odor which contaminate workshop environment. The process is classified as one of the avoided jobs and make the planned output achievement difficult. Development of an elimination device to clear out the contaminating materials in the workshop and improvement of the unsatisfactory maintenance method to fix the abrasion of die block impression which delays the dead line, cost increases needs to be developed. In this research, I tried to solve the problems caused in warm forging of bronze pipe joint such as the billet heating process, die maintenance, and manufacturing cost through improvement of warming forging manufacturing method and die maintenance method and eliminating harmful gas which will make the workshop more environment friendly.

• Economic and Environmental Geology
• /
• v.53 no.6
• /
• pp.677-685
• /
• 2020

The host rock of the Usuki Stone Buddha Statues is dark gray welded tuff involved the Aso-4 pyroclastic flow sediments. This Buddha Statues are processing chlorosis from rainfall flowing above and underground water which were urgently needed for conservation measurement. White precipitates, the main source of salt weathering, on the surface of the Buddha Statues are mainly consisted of thenardite, gypsum and dolomite. Extraction experiment result shows that thenardite was dissolved at the beginning of stirring and then redissolved after 4 hours, and gypsum was detected until stirring for 2 hours, and then dissolved after stirring for 4 hours. As a result of monitoring the microclimate environment for 11 months to determine the recrystallization environment of white precipitates, the phase transition between thenadite and mirabilite appears widely in spring, and is maintained in an aqueous solution due to high temperatures in summer and fall. In winter, mirabilite is shown the widest by decreasing temperature. Therefore we requires details monitoring for blocking water transfer port and solved humidity environment in shelter.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.1
• /
• pp.35-45
• /
• 2013

The concrete-filled tube column has the excellent structural performance. But it is difficult to connect with column and beam because of closed section. It suggests that pipe should be produced by welding two sides together where two shapes are joined after a channel is pre-welded onto the three sides in order to form an internal diaphragm. The upper diaphragm of the connection used the horizontal plate and the lower diaphragm used the Vertical plate. This research performed 6 monotonic tension experiments describing the connection upside and downside in order to evaluate the structural capability of the offered connection. And the cyclic loading experiment was performed about 2 T-Type column to beam connections. As to the experimental result edge cutting geometry, there was no big effect. An increase in the number of holes of the plate ultimate strength was increased by 5% and The thickness of the plate increases, the maximum strength was increased by 4%. T-Type connections until it reaches the plastic moment showed a stable behavior.

• Clean Technology
• /
• v.16 no.4
• /
• pp.265-271
• /
• 2010

The deactivated diesel oxidation catalyst(DOC) was remanufactured by ultrasonic wave treatment with various solutions, followed by active component re-impregnation. The catalytic performance and surface properties of remanufactured DOC were studied at various remanufacturing conditions. The proper ultrasonic-wave cleaning time at various solutions and optimal re-impregnation amounts of active component for the best catalytic performance were investigated. The catalytic performance tests on the conversions of CO and THC(total hydrocarbon) were also carried out at various temperatures by catalytic reaction test unit using bypass gas from the diesel engine dynamo system. It was found that the catalytic performance of DOC remanufactured with the high-temperature air washing, ultrasonic wave cleaning at acidic/basic solutions and active component re-impregnation method was recovered to 90% level of its activity compared to that of the fresh DOC, which was caused by removing the deactivating materials from the surface of the DOC through the analyses of catalyst performance test and their characterization by Optical microscope, EDX, ICP, TGA, and porosimeter.