• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.86-92
• /
• 2010

A metal diaphragm compressor has been widely used for supplying a high pressures gas. This compressor mainly consists of gas oil space and metal diaphragm. Gas sucked in the gas space is compressed by an oscillating metal diaphragm existed between the gas and oil space. A non-return discharge and suction check-valve are components of the compressor that draw off the compressed oil and gas. Those components are self-actuated by differential pressures. Therefore, the rapid response and stable operating conditions are required. In the present study, to find out the dynamic behavior of the suction, discharge valve and diaphragm compressor, the unsteady flow field has been investigated numerically by using the unsteady two-way FSI (Fluid Structure Interaction) simulation method, $k-{\omega}$ turbulent model and mesh deformation.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.769-772
• /
• 2009

Diaphragm compressors are used for a hydrogen compression because it can achieve high gas pressure with high purity. But diaphragm's lifetime may depend on the shape of the cavity and deflection from fluctuation the pressure change, which is necessary to monitored. In this study, the gas and hydraulic oil pressure in the cavity were measured as piston speed varies for diaphragm compressor. The results show pressure change quantities were reduced and maximum pressure points are delayed as the piston moves faster. And the hydraulic pressure were elevated as gas pressure elevated. And the compression period was more faster than expansion period.

• 한국수소및신에너지학회논문집
• /
• 제20권4호
• /
• pp.274-282
• /
• 2009

Diaphragm compressor is widely used for hydrogen compression because it achieves high gas pressure without gas contamination. Diaphragm deflecting in the cavity with high pressure formed by an oil compression is the most important component in the compressor. Therefore, it is necessary to obtain deflection degree of diaphragm to predict the damage point of diaphragm. The objective of this study is to estimate the diaphragm's damage point through diaphragm deflection test by implementing with strain gauges attached on several radial points. Without gas compression, strain sum of each points varied as similarly as the variation of the pressure with respect to time. And while the motor speed was slower than 400rpm, the strain near the rim was larger than that of the center. When motor speed, however, was over 500rpm, strain became similar to that of the center and the rim. With gas compression, it was shown that the variation of the strain sum was delayed against that of the pressure and the strain near the rim was much higher than that of the center.

• 사물인터넷융복합논문지
• /
• 제5권1호
• /
• pp.29-34
• /
• 2019

백필터 집진기는 여러개 또는 수십개의 여과포를 구성하여 미세먼지를 정화시켜 깨끗한 공기를 대기에 방출시키는 일종의 공기청정기이다. 백필터 길이가 5m 이하인 경우 다이아프램 밸브에서 발생되는 압축공기를 벤추리를 통과시키는 것만으로도 백필터에 부착된 분진 및 흄을 효율적으로 탈진 할 수 있었다. 7m 이상의 롱백 탈진에 만족스러운 결과를 얻기 위해서는 더욱 효율이 높고 경제성 있는 인젝터 개발이 시급한 실정이다. 기존 국내외 인젝터의 경우 유지 보수시 다수의 블루튜브 해체작업과 인젝터와 블루튜브가 결합되어 중량증가로 인한 작업의 불편성 등 많은 문제를 내포하고 있는 실정이다. 본 연구에서는 코안다 효과를 이용한 최적의 인젝터 개발을 위한 유동해석과 4차 산업의 지능형 자동화 탈진 기술이 접목되어, 기존 설비 대비 에너지 비용저감 및 필터 수명향상 등을 획기적으로 개선시키고자 하는 상용화 연구를 수행하였다.