• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.6
• /
• pp.225-229
• /
• 2011

Most of the silicon cutting methods using the multi-wire with the slurry injection have been used for wafers of the crystalline solar cell. But the productivity of slurry injection cutting type falls due to low cutting speeds. Also, the direct contact with the metal wire and silicon block increases the concentration of metallic impurities in the wafer's surface. In addition, the abrasive silicon carbide (SiC) generates pollutants. And production costs are rising because it does not re-use the worn wire. On the other hand, the productivity of the cutting method using the diamond coated wire is about 2 times faster than the slurry injection cutting type. Also, the continuous cutting using the used wire of low wear is possible. And this is a big advantage for reduced production costs. Therefore, the cutting method of the diamond coated wire is more efficient than the slurry injection cutting technique. In this study, each cutting type is analyzed using the surface characteristics of the solar wafer and will describe the effects of the manufacturing process of the solar cell. Finally, we will suggest improvement methods of the solar cell process for using the diamond cutting type wafer.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.180-180
• /
• 2016

보론이 도핑된 $3{\times}3cm$ 크기의 p 형 다결정 실리콘 기판의 표면을 경면연마한 후, 다이아몬드 입자의 seeding을 위해 슬러리 중 다이아몬드 분말의 입도를 5 nm로 고정하고 초음파 전처리 공정을 진행한 후, 다이아몬드 박막을 증착하였다. 다이아몬드 증착은 Microwave Plasma Chemical Vapor Deposition 장비를 이용하였으며, 공정 조건은 초기 진공 $10{\times}10^{-3}Torr$, 공정 가스 비율 $Ar:CH_4=200:2$, 가스 유량 202 sccm, 공정압력 90 Torr, 마이크로웨이브 파워 600 W, 기판 온도 $600^{\circ}C$이었다. 기판에 DC bias 전압을 인가하는 것을 공정 변수로 하여 0, -50, -100, -150, -200 V로 변화시켜가며, 0.5, 1, 2, 4 h 동안 증착을 진행하였다. 주사전자현미경과 XRD, AFM, 접촉각 측정 장비를 이용하여 증착된 다이아몬드 입자와 막의 특성을 분석하였다. 각 bias 조건에서 초기에는 다이아몬드 입자가 형성되어 성장되었다가 시간이 증가될수록 연속적인 다이아몬드 막이 형성되었다. Table 1은 각 bias 조건에서 증착 시간을 4 h까지 변화시키면서 얻은 다이아몬드 입자 또는 박막의 높이(두께)를 나타낸 것이다. 2 h까지의 공정 초기에는 bias 조건의 영향을 파악하기 어려운데, 이는 bias에 의한 과도한 이온포격으로 입자가 박막으로의 성장에 저해를 받는 것으로 사료된다. 증착시간이 4 h가 경과하면서 -150 V 조건에서 가장 두꺼운 막이 성장되었다. 이는 기판 표면을 덮은 다이아몬드 박막 위에서 이차 핵생성이 bias에 의해 촉진되기 때문으로 해석된다. -200 V의 조건에서는 오히려 막의 성장이 더 느렸는데, 이는 Fig. 1에 보이듯이 과도한 이온포격으로 Si/diamond 계면에서 기공이 형성된 것과 연관이 있는 것으로 보인다.

• Resources Recycling
• /
• v.22 no.2
• /
• pp.37-43
• /
• 2013

Unlike the conventional slurry type wire sawing, the diamond wire sawing method adopts diamond plated wire as sawing media instead of slurry consisted of both silicon carbide and oil. Wafering with diamond plated wire leaves solid element of the sludge mostly made up of silicon, and it is not difficult to recover 95% or more of silicon by a simple separation process of oil from the sludge. In this study, silicon was recovered from the sludge by drying process and organic and metal impurities were removed by sintering process. As result 3N grade silica was obtained successfully by thermal processing utilized the fact that the recovered silicon readily combines with oxygen due to fine particle size.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.9
• /
• pp.32-37
• /
• 2008

Freestanding hydride vapor phase epitaxy grown GaN(Gallium Nitride) substrates subjected to various polishing methods were characterized for their surface and subsurface conditions, Although CMP(Chemical Mechanical Polishing) is one of the best approaches for reducing scratches and subsurface damages, the removal rate of Ga-polar surface in CMP is insignificant($0.1{\sim}0.3{\mu}m$/hr) as compared with that of N-polar surface, Therefore, conventional MP(Mechanical Polishing) is commonly used in the GaN substrate fabrication process, MP of (0001) surface of GaN has been demonstrated using diamond slurries with different abrasive sizes, Diamond abrasives of size ranging from 30nm to 100nm were dispersed in ethylene glycol solutions and mineral oil solutions, respectively. Significant change in the surface roughness ($R_a$ 0.15nm) and scratch-free surface were obtained by diamond slurry of 30nm in mean abrasive size dispersed in mineral oil solutions. However, MP process introduced subsurface damages confirmed by TEM (Transmission Electronic Microscope) and PL(Photo-Luminescence) analysis.

• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.3 s.40
• /
• pp.47-51
• /
• 2006

Recently, CMP (Chemical Mechanical Polishing) is one of very important processing in semiconductor technology because of large integration and application of design role. CMP is a planarization process of wafer surface using the chemical and mechanical reactions. One of the most important components of the CMP system is the polishing pad. During the CMP process, the pad itself becomes smoother and glazing. Therefore it is necessary to have a pad conditioning process to refresh the pad surface, to remove slurry debris and to supply the fresh slurry on the surface. A conditioning disk is used during the pad conditioning. There are diamonds on the surface of diamond disk to remove slurry debris and to polish pad surface slightly, so density, shape and size of diamond are very important factors. In this study, we characterized diamond disk with 9 kinds of sample.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.537-542
• /
• 2004

Machinble Ceramics have some excellent properties as the material for the mechanical components. It is, however, very difficult to grind ceramics with high efficiency because of their high strength, hardness and brittleness. Lapping used diamond slurry and lapping by in-process electrolytic dressing is developed to solve this problem. On this paper, a comparative study of processing ability of lapping used diamond slurry and lapping by in-process electrolytic dressing.

• Clean Technology
• /
• v.18 no.1
• /
• pp.43-50
• /
• 2012

Cleaning procedure of solar silicon wafer, following ingot sawing process in solar cell production is studied. Types of solar silicon wafer can be divided into monocrystalline or multicrystalline, and slurry sawn wafer or diamond sawn wafer according to the ingot growing methods and the sawing methods, respectively. Wafer surface and contaminants can vary with these methods. The characterisitics of contaminants and wafer surface are investigated for each cleaning substrate, and appropriate cleaning agents are developed. Physical properties and cleaning ability of the cleaning agents are evaluated in order to verify the application in the industry. The wafers cleaned with the cleaning agents do not show any residual contaminants when analyzed by XPS and regular patterns are formed after texturization. Furthermore, the cleaning agents are applied in the production industry, which shows superior cleaning results compared to the existing cleaning agents.