• 대한음성학회지:말소리
• /
• 제50호
• /
• pp.51-69
• /
• 2004

In this paper, we present a one-pass semi-dynamic network decoding framework that inherits both advantages of fast decoding speed from static network decoders and memory efficiency from dynamic network decoders. Our method is based on the novel language model network representation that is essentially of finite state machine (FSM). The static network derived from the language model network [1][2] is partitioned into smaller subnetworks which are static by nature or self-structured. The whole network is dynamically managed so that those subnetworks required for decoding are cached in memory. The network is near-minimized by applying the tail-sharing algorithm. Our decoder is evaluated on the 25k-word Korean broadcast news transcription task. In case of the search network itself, the network is reduced by 73.4% from the tail-sharing algorithm. Compared with the equivalent static network decoder, the semi-dynamic network decoder has increased at most 6% in decoding time while it can be flexibly adapted to the various memory configurations, giving the minimal usage of 37.6% of the complete network size.

• 한국유체기계학회 논문집
• /
• 제16권3호
• /
• pp.32-38
• /
• 2013

This paper deals with the study on the rotordynamic and experimental analysis of turbine-generator system connected with a magnetic coupling. Although magnetic coupling has been used to torque transmission of chemical processing pump rotating at under 3,600rpm, magnetic coupling in this study is applied to high-speed turbine-generator system using a working fluid that is refrigerant such as ammonia or R-124a. Results of rotordynamic design analysis are as follows. The first, shaft diameter nearest to outer hub of magnetic coupling has a big effect on the $1^{st}$ critical speed of generator rotor. The second, if the $1^{st}$ critical speeds of turbine rotor and generator rotor have enough to separation margin in comparison to rated speed, the $1^{st}$ critical speed of turbine-magnetic coupling-generator rotor train has enough to separation margin regardless of connection stiffness of magnetic coupling. The analytical FE model is guaranteed by impact test on the prototype and condition monitoring such as measurements of vibration and bearing temperature is also performed.

• 한국자동차공학회논문집
• /
• 제20권3호
• /
• pp.98-105
• /
• 2012

Recently, most of the countries started to regulate the emission of vehicle because of the global warming. The engine scooter is also one of the factor which cause the pollution. The hybrid system of a vehicle has many advantages such as fuel saving and emission reduction. The purpose of this study is to choose optimal size of engine, motor and battery for hybrid scooter system using Dynamic programming. The dynamic programming is an effective method to find an optimal solution for the complicated nonlinear system, which contains various constraints of control variables. The power source size of hybrid scooter was chosen through the backward simulator using dynamic programming. From the analysis, we choose the optimal size of each power source. To verify the optimal size of the power source, the Forward simulation was carried out. As a result, the fuel efficiency of hybrid scooter has significantly increased in comparison with that of engine scooter.

• 한국통신학회논문지
• /
• 제11권6호
• /
• pp.411-420
• /
• 1986

本 論文에서는 델타變調(Delta Modualation:DM) 符號器의 入力에 音聲帶域信號를 使用하였을 때 非適應形인 線形變調方式(Linear Delta) Modulation:DOM)과 適應形인 一定係數變調方式(Constant Factor Delta Modulation:CFDM)을 比較하였다. 샘플링레이트(sampling rate)를 16~96kb/s로 變化시키면서 測定, 比較한 結果 20kb/s에서는 適應形이 非適應形보다 信號對量子化雜音比(Signal-to-Quantization Noise Ratio:SQNR)가 8〔dB〕改善되었고 60kb/s에서는 平均 14〔dB〕정도 改善되었다. 특히 雜音이 없는 理想的 채널에서는 最大 SQNR이 거의 비슷하고 CFDM이 LDM보다 넓은 다이나믹범위(Dynamic range)를 가지나 雜音이 있는 채널에서는 CFDM의 誤差率이 증가하여 SQNR이 떨어진다는 것을 알 수 있었다.

• 한국유체기계학회 논문집
• /
• 제12권5호
• /
• pp.47-53
• /
• 2009

A rotordynamic and detailed stability analysis in accordance with API 617 standard were performed with a turbo-compressor, which is one of key rotating machinery in refinery, petroleum, and power plants. The system is composed of rotor shaft, impeller, sleeve hub, balance drum, and coupling hub. The rotor system is supported by tilting pad bearings, which has 5 pads and pad on loading condition. The rotordynamic analysis specified by API 617 includes the critical speed map, mode shape analysis, Campbell diagram, unbalance response analysis, and stability analysis. In particular, the specifications of stability analysis consist of a Level 1 analysis that approximates the destabilizing effects of the labyrinth seals and aerodynamic excitations, and Level 2 analysis that includes a detailed labyrinth seal aerodynamic analysis. The results of a rotordynamic analysis and stability analysis can evaluate the operating compressor health and can be utilized as a guide of its maintenance, repair and trouble solution.

• 한국유체기계학회 논문집
• /
• 제14권5호
• /
• pp.69-74
• /
• 2011

This paper deals with the detail rotordynamic analysis for the vertical rotor system as development of vertical sea water lift pump for FPSO deep well. In a vertical rotor system, since linearized stiffness and damping coefficients of fluid film bearing are no longer be valid, hence the transient response analysis considering a fluid film force for every journal position in the bearing needs to be required. In this study, the transient response analysis of the proposed vertical pump rotor system was carried out in dry-run and wet-run conditions, respectively. The results show that orbital vibration responses of the rotor system remain stable at rated speed and thereby operating reliability of the vertical rotor system is confirmed. To overcome complexity of calculation pr ocedure and time consuming calculation of transient analysis, the calculating technique of steady-state response analysis is also proposed. The results of steady-state response obtained by applying the proposed technique to the rotor system are good agreement with the reference results, that is, transient responses.

• 소음진동
• /
• 제9권3호
• /
• pp.593-599
• /
• 1999

A rotordynamic analysis is performed with a motor-bull gear rotor system supported on two partial bearings, which is intended to drive a high-speed turbo-chiller compressor impeller shaft through its built-in pinion gear. The motor-bull gear rotor system has a rated speed of 3,600 rpm, and is modeled utilizing the finite element method for analysis. As loadings on the bearings due to the gear action are significant in the system considered, each resultant bearing load is calculated statically by considering the generalized forces of the gear action as well as the rotor itself. The two support partial bearings are designed to take their varying loads along with their varying load angles, and they are also analyzed to give their rotordynamic coefficients. Then, a complex rotordynamic analysis of the motor-bull gear rotor-bearing system is carried out to evaluate its whirl natural frequencies and mode shapes and unbalance responses under various loading conditions. Results show that the bearings and entire rotor system are well designed regradless of operating conditions, i.e., loads and operating speeds.

• 한국유체기계학회 논문집
• /
• 제14권6호
• /
• pp.91-95
• /
• 2011

This paper deals with the detail rotordynamic analysis for the assembly rotor composed of turbine wheel, turbine shaft, connecting arbor, and flange & spindle in order to perform the spin test of turbocharger turbine. Prior to rotordynamic analysis, the 1st spin test was performed but the test was failed by excess vibration in the neighborhood rated speed. It is the reason for this fail that the separation margin between the rated speed and critical speed is not enough, confirmed by rotordynamic analysis results. Since then, the dimension of turbine shaft was modified and the critical speeds were again reviewed for modified assmebly rotor. In results, the separation margin between the rated speed and critical speed is over 20% and then the 2nd spin test was performed successfully. In preparing spin test for turbine, compressor wheels and etc., the geometry design of connecting arbor and dimension of rough machining should be reviewed by considering rotordynamic results, and the separation margin should be enough for successful spin test.

• 한국유체기계학회 논문집
• /
• 제13권5호
• /
• pp.35-42
• /
• 2010

This paper deals with the development of analytical model of a turbocharger and its detail rotordynamic analysis. Two analytical models, which are verified by experimental modal testing, are proposed and the analytical model including rotor shaft extended to compressor and turbine wheel end side is chosen. A rotordynamic analysis includes the critical map, Campbell diagram, stability, and unbalance response, especially nonlinear transient response considering nonlinear fluid film force at bearings. Although the linearized analysis accurately predicts the critical speeds, stability limit, and stability threshold speed, the predicted vibration results are not valid for speeds above the stability threshold speed since the rotor vibrates with a subsynchronous component much larger than the one synchronous with rotor speed. Hence, for operating speed above the stability threshold, a nonlinear transient analysis considering nonlinear fluid film force must be performed in order to accurately predict vibration responses of rotor and guarantee results of analysis.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.440-444
• /
• 2017

격벽착화기의 기폭으로 인하여 발생하는 충격파가 격벽을 통과할 때의 감쇠 특성을 해석하기 위하여 2차원 하이드로다이나믹 해석을 수행하였다. HNS와 HMX가 적층되어 있는 기폭제와 STS 격벽간의 연동해석을 통해 폭압 생성 및 압력파 감쇠 현상을 정밀하게 모사하였다. VISAR로 측정한 시험 데이터와의 정량적인 비교를 위하여 격벽 끝단에서의 자유표면 속도를 계측하였다. 해석결과, 격벽 두께에 따른 충격파의 압력 감쇠 패턴이 지수적으로 감소하는 것을 확인하였으며, 시간에 따라 측정된 입자속도에서 관찰된 변곡 패턴은 기폭부와 격벽 사이의 충전면의 급격한 파쇄(spallation)에 의한 충격파의 잇따른 전파에 의한 것임을 규명하였다.