• Journal of Veterinary Clinics
• /
• v.28 no.5
• /
• pp.542-545
• /
• 2011

A 12-year-old Yorkshire Terrier bitch evaluated with vaginal prolapsed and vaginal bleeding. Abdominal sonography and radiography demonstrated abnormal enlargement of uterus in abdominal cavity. The dog had been submitted to the vaginal mass resection and the ovariohysterectomy. In gross examination, the vaginal mass was firm and multiple cysts were detected in both ovaries and uterine horns. In microscopic examination, vaginal fibroma, uteroovarian cystadenocarcinoma were revealed. To our knowledge, this report is a very rare case of multiple complex neoplasms in the genital organs of dog. These findings may contribute to study and enhance the knowledge on genital tumors.

• Korean Journal of Materials Research
• /
• v.11 no.2
• /
• pp.115-119
• /
• 2001

The electrical properties of heavily drawn bundled Cu- Nb filamentary microcomposite wires were examined and correlated with the microstructural changes caused by thermomechanical treatments. The cross sectional shape of Nb filaments in wires fabricated by bundling and drawing appear straight or slightly curved. The different shape of Nb filaments is attributed to the break- up and cylinderization of Nb filaments during the bundling process at high temperatures. The resistivity of Cu-Nb microcomposites is predominantly controlled by electron scattering at Cu-Nb interfaces. The decrease of the conductivity below the annealing temperature of $400^{\circ}C$ is due to the increasing contribution of the scattering associated with coherency strains of needle- shaped precipitates. The slight decrease of the resistivity ratio (${\rho}_{295K}/{\rho}_{75K}$) is also due to the precipitation of Nb atoms. The increase in conductivity in Cu-Nb microcomposites at an annealing temperature of 50$0^{\circ}C$ is due to the coarsening and spheroidization of Nb filaments.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.5 no.2
• /
• pp.66-74
• /
• 2012

Purpose: To compare the outcome of two methods of chronic calcific tendinitis (CCT) treatment, Multiple drilling alone versus combined drilling and extracorporeal shock-wave therapy (ESWT). Furthermore, to analyze the clinical and radiologic results of different energy level configurations of ESWT. Materials and Methods: Among the patients complaining shoulder pain who visited the clinic from June 2010 to August 2011, 98 were diagnosed with CCT of the supraspinatus and were divided into the following three groups. Multiple drilling alone (n=31), Multiple drilling followed by high-energy ESWT (n=31), Multiple drilling followed by low-energy ESWT (n=36). The study was conducted only with patients with chronic pain persisting longer than six months despite prolonged conservative therapy. Clinical evaluation was done before and after 12 weeks from treatment, in clinical terms using the ASES, KSS, CSS system reflecting performance and symptom improvement, and in radiologic terms by studying the change in size of the calcific nodules. Results: All of three groups showed effects for improvement of clinical function and decrease of calcification and clinical improvement was significantly high in comparison between the group fulfilled by only multiple needling (the third group) and the group fulfilled by additional ESWT (the first and second groups) and in the radiological evaluation, calcification size and the rate of calcification decrease showed significant improvement statistically. For the comparison among the groups, degree of clinical function improvement and rate of calcification decrease showed significant difference between high energy group (the first group) and multiple needling group (the third group) as well as low energy group (the second group) and multiple needling group (the third group). But, in comparison between high energy group (the first group) and low energy group (the second group), there was no significant difference for the degree of clinical function improvement and rate of calcification decrease. Conclusion: For the treatment of chronic calcific tendinitis, additional ESWT showed more superior effects on clinical function improvement and radiological improvement regardless of the energy standard rather than the exclusive fulfillment of needling. But, as the result of ESWT by the energy standard, there was no significant difference for the decrease of calcification and degree of clinical function improvement.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.4
• /
• pp.455-467
• /
• 2001

In this study, the stacking phase shift effect on the effective property and stress distribution was investigated for 8-harness satin weave textile composites under uni-axial tension. Textile configurations with varied phase shifts were modeled by unit cells and repeating boundary conditions were applied at the outer periodic surfaces. The effective property and stress were calculated by the unit cell analysis using macro-element to reduce the computational resource. It was found that stresses were dependent on the variation of tow arrangement of adjacent layers. The in-phase and the shifted configurations showed large differences in the stress distribution pattern. The stress level was very high in the resin region and the distribution of the maximum stresses was widely scattered.

• Radiation Oncology Journal
• /
• v.3 no.2
• /
• pp.175-178
• /
• 1985

Even though the mechanism and the nature of radiation induced pneumonitis, esophagitis and gastroenteritis were detailed by many authors, complicated secondary infection is still serious problem, sometimes fatal, even today. We experience a case of multiple pyogenic abscess in subcutaneous tissue of the back and both kidneys which could not differenciate from multiple metastatic sarcoma grossly, and report with review of literatures, lab findings.

• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.73-79
• /
• 2010

In this study, the equivalent elastic modulus of flexible textile composites was predicted by nonlinear finite element analysis. The analysis was carried out considering the material nonlinearity of fiber tows and the geometrical nonlinearity during large deformation using commercial analysis software, ABAQUS. To account for the geometrical nonlinearity due to the large shear deformation of fiber tows, a user defined material algorithm was developed and inserted in ABAQUS. In results, nonlinear stress-strain curve for the flexible textile composites under uni-axial tension was predicted from which effective elastic modulus was obtained and compared to the test result. The effective elastic moduli were calculated for the various finite element models with different waviness ratio of fiber tow.

• Journal of Chest Surgery
• /
• v.35 no.10
• /
• pp.764-767
• /
• 2002

An unusual case of primary leiomyosarcoma at the left lower posterior chest wall with metastasis to the right lung parenchyme is presented. The patient was a 43-year-old man who was asymptomatic but a slow growing hard mass was noted at the left lower posterior chest wall. The chest computed tomography showed a tumor at the left lower posterior chest wall with multiple metastasis to the right lung. The left lower posterior chest wall mass was examined by percutaneous needle aspiration and it was revealed as rhabdomyosarcoma histologically. En bloc resection to the left lower posterior chest wall tumor and metastasectomy to the multiple nodules in the right lung were done and pathological examination finally revealed primary leiomyosarcoma at the left lower posterior chest wall with multiple metastasis to the right lung. Chemotherapy was scheduled as adjunctive measure.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.70-71
• /
• 2002

연소실의 세장비(aspect ratio)가 작으면서 추진제의 고 충전을 이용한 단시간 연소 모타는 유도탄의 사출 모타 용으로 사용될 수 있다. 사출 모타는 일반적으로 모타 무게에 대한 제약 조건이 까다롭지 않기 때문에 무게 경량화에 대한 부담은 줄어들지만, 모타의 부피가 커지면 유도탄 발사 장치의 부피가 커지기 때문에 공간적인 측면에서 가능한 작게 하는 것이 시스템 전체의 효율을 증대시킬 수 있다. 또한 사출 모타의 연소 시간이 짧기 때문에(1초 이내) 추진제의 웹 두께가 작으므로 연소실의 주어진 공간에서 추진제를 많이 채우기 위한 방법으로 원통 튜브형 그레인을 여러 개의 다발로 사용하는 방법이 효과적이다. 이러한 관점에서 사출 모타용으로 다발 원통 튜브형 그레인을 설계/제작/연소시험을 하였더니 작은 저주파(약 10Hz)의 연소 불안정 현상이 발생하였다. (그림1). 이러한 주파수 대역은 일반적으로 잘 알려진 연소 불안정 모드 (longitudinal, tangential, and radial mode)와는 다른 아주 특이한 현상이다. 이러한 현상의 주 원인은 연소실 내 압력의 비평형에 의한 현상이라 판단되어 다음과 같은 연구를 수행하였다. 1) 그레인 튜브간의 압력 평형을 원활하게 하기 위하여 그레인에 구멍(홀)을 뚫어서 연소 안정화에 미치는 영향에 대한 연구(그림2), 2) 그레인에 홀을 뚫지 않고 격자와 격자간의 공간을 이용하여 그레인 간에 발생된 저주파의 압력 진동을 산란/소멸 시키는 연소 안정화 연구(그림3).

• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.161-163
• /
• 2006

포항가속기는 선형가속기 및 저장링을 통하여 2.5Gev의 고에너지 전자빔 생성과 저장, 유지 되고 있다. 저장링에서 안정적으로 방사광을 추출하여 각종 실험 및 연구를 위하여 이를 제공하고 있다. 이를 위해서 전자가 매우 안정적이고 높은 집적도를 가진 전자다발 형태로 유지되어야 한다. 전자다발의 집적도가 높을수록 전자간의 상호 간섭으로 보유에너지가 더 빠른 시간에 소진되어 전자빔의 수명이 짧아진다. 3차 하모닉 RF 공동기는 전자다발의 운동방향으로 길게 늘려서 전자밀도를 줄여 전자빔의 운전수명을 개선하기 위한 장치이다. 공동기의 제작은 소재준비, 성형, 가공, 용접, 연마, 열처리 등의 여러 공정을 거쳐 완료된다. 본 보고서에서는 공동기의 제작 공정 중 전자빔을 이용한 시험용접, 본용접, 용접부 검사 및 용접부의 연마와 결과에 대하여 기술하였다.

• The Journal of the Korean bone and joint tumor society
• /
• v.18 no.2
• /
• pp.99-103
• /
• 2012

Little literature exists about the risk of atypical femoral fracture in patients received zoledronic acid for prevention of skeletal metastasis. We report an atypical subtrochanteric femoral fracture in a patient with multiple myeloma received zoledronic acid. The patient was treated by closed reduction and internal fixation with cephalomedullary nailing.