• 한국자동차공학회논문집
• /
• 제11권4호
• /
• pp.173-179
• /
• 2003

In this paper, a real-time multibody vehicle dynamics and control model has been developed for a virtual reality intelligent vehicle simulator. The simulator consists of low PCs for a virtual reality visualization system, vehicle dynamics and control analysis system a control loading system, and a network monitoring system. Virtual environment is created by 3D Studio Max graphic tool and OpenGVS real-time rendering library. A real-time vehicle dynamics and control model consists of a control module based on the sliding mode control for adaptive cruise control and a real-time multibody vehicle dynamics module based on the subsystem synthesis method. To verify the real-time capability of the model, cut-in, cut-out simulations have been carried out.

• 대한기계학회논문집A
• /
• 제38권2호
• /
• pp.115-120
• /
• 2014

본 연구에서는 다물체 동역학 해석 소프트웨어인 RecurDyn 을 이용하여 풍력 발전기를 쉽게 모델링하고 동적 거동 해석을 수행할 수 있는 기법을 개발하였다. 풍력 발전기는 타워, 너셀, 허브, 그리고 블레이드로 구성되어 있다. 타워와 블레이드는 탄성체로 가정하였고 탄성효과를 고려하기 위하여 탄성체 이론을 이용하여 모델링 하였다. 바람의 속도는 일정하다고 가정하였고 날개 요소 운동량 이론을 이용하여 공력하중을 모델링 하였다. 이를 통해 계산된 공력을 풍력 발전기에 적용시키고 동적 거동 해석을 수행하였다. 해석의 타당성을 검증하기 위하여 풍력 발전 시스템 상용 소프트웨어인 GH-Bladed를 이용한 해석결과와 비교하였다.

• 한국항공우주학회지
• /
• 제47권10호
• /
• pp.705-711
• /
• 2019

전개형 반사판 안테나의 전개거동 특성을 해석적 그리고 실험적 방법으로 분석하고자 한다. Kane 방정식을 이용하여 전개형 안테나의 다물체 운동방정식을 공식화하였다. 복합재료 반사판의 구조변형 특성을 살펴보기 위해 FSDT(First-order Shear Deformation Theory)를 이용하여 빔 모델로 유한요소 정식화 하였다. 역진자 모델을 이용하여 안테나 전개시간에 따른 스프링 상수 그리고 댐핑 계수들을 결정하였다. 다물체 동력학 해석을 통하여 설계변수에 따른 안테나 반사판의 동적구조 특성을 확인하였고, 무중력 모사 전개실험을 통하여 해석결과 검증 및 거동특성을 실험적으로 관찰하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.584-589
• /
• 2001

The latch needle cam system of circular knitting machines is analysed using multibody dynamics. A formulation is made to obtain the vertical stiffness between the needle and the cam. By implementing this formulation into data of the multibody dynamics program, the motion and the force between the needle and the cam are obtained.

• 대한기계학회논문집A
• /
• 제24권11호
• /
• pp.2804-2811
• /
• 2000

A Nordsick form opf the multirate integration scheme has been proposed for flexible multibody dynamic systems. It is assumed that vibrational modal coordinates in the equations of motion are treated as fast variables, whereas the relative joint coordinates are treated as slow variables. In the multirate integration, the fast variables are integrated with small step-size, and the slow variables are integrated with larger step-size. The proposed multirate integration method is based on the Adams-Bashforth-Moulton predictor-corrector method and implemented in the Nordsieck vector form. The Nordsieck form of multrate integration method provides effective step-size control and at the same time, inherits the efficiency from the Adams integration method. Simulations of a flexible gun and turret system of the military tank have been carried out to show the effectiveness and efficiency of the proposed method.

• 드라이브 ㆍ 컨트롤
• /
• 제20권4호
• /
• pp.9-16
• /
• 2023

This paper analyzed a drainage tower used to drain water in flooded areas. Multi-body dynamics simulation was used to analyze the dynamic behavior of the drainage tower. Structural analysis, flexible-body dynamic analysis, and rigid body dynamic analysis were done to study the maximum Von-Mises stress of the drainage tower. The results showed that the maximum Von-Mises stress occurs at the turn table, and it decreases when the angle of the boom is increased. Also, the rate of the change of angle affects the maximum stress so that the maximum stress changes more when the angular velocity of the boom increases. Based on the rigid body dynamic analysis and the theoretical analysis results, the centrifugal force from the angular velocity makes the difference in the maximum stress at the turn table because of the difference in their direction. Consequently, it was concluded that the centrifugal force should be considered when designing construction machinerythat can rotate.

• 한국항공우주학회지
• /
• 제40권2호
• /
• pp.101-107
• /
• 2012

본 연구에서는 CFEM을 이용하여 구속조건이 있는 다물체의 운동방정식해석 프로그램을 개발하였다. 다양한 구속조건을 다루기 위하여 7개의 구속모델이 적용되었다. 구속조건으로 보안된 운동방정식은 높은 정확도를 위해 4차의 Runge-Kutta 방법을 사용하여 해석하였다. 다양한 구속조건이 있는 문제에 대하여 개발된 프로그램을 적용하고, 발표된 결과와 비교함으로써 개발 프로그램을 검증하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.540-541
• /
• 2013

• 한국생산제조학회지
• /
• 제21권1호
• /
• pp.130-136
• /
• 2012

Dynamic as well as static and geometric design parameters such as inertia, tooth profile, backlash and clearance can be directly considered via multi-body dynamic analysis along with contact analysis. However, it is time consuming to use finite elements for the consideration of the tooth flexibility in the multi-body dynamic analysis of gears. A computationally efficient procedure, so called, Gear Stiffness Module, is suggested to resolve this calculation time issue. The characteristics of gear tooth compliance are discussed and rotational stiffness element concept for the Gear Stiffness Module is presented. Transmission error analyses for a spur gear system are carried out to validate the reliability and efficiency of the module. Compared with the finite element model, the Gear Stiffness Module yields considerably similar results and takes only 3% of calculation time.

• 한국소음진동공학회논문집
• /
• 제22권1호
• /
• pp.88-93
• /
• 2012

In this study, a multi-body dynamic model is developed for a washing machine and the dynamic behaviors of the machine are investigated. The mechanical properties such as spring constants and damping factors are measured from vibrational experiments. With these experimentally obtained mechanical properties, a computer simulation model for the washing machine is established by using a commercial multi-body dynamics software DAFUL. In order to verify the developed simulation model, the dynamic responses computed from simulation are compared to the responses measured from vibration experiments. In addition, the effects of the stiffness and damping factors on the dynamic responses are also analyzed.