• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.12
• /
• pp.1128-1139
• /
• 2013

KOMPSAT-5(KOrea Multi-Purpose SATellite-5) has a benefit of continuously conducting its mission in all weather and even night by loading SAR(Synthetic Aperture Radar) payload, which is different from optical sensor of KOMPSAT-2 satellite. During IOT(In-Orbit Test) periods, SAR image calibration should be conducted through ground target of which location and RCS is pre-determined. Differently from the conventional corner reflector, active transponder has a capability to change its internal transfer gain and delay, which allows active transponder to be shown in a pixel of SAR image with very high radiance and virtual location. In this paper, the development of active transponder is presented from design to I&T(Integration and Test).

• Korean Journal of Remote Sensing
• /
• v.30 no.1
• /
• pp.37-45
• /
• 2014

This paper reports the geolocation accuracy of KOMPSAT-3 imagery. KOMPSAT-3 was launched successfully on May 18, 2012 and has been released last March. In this paper, we have checked the geolocation accuracy of initial sensor model, precise sensor model and stereo-and multi-image model using four KOMPSAT-3 images covering the same area. The KOMPSAT-3 images without GCPs provided the geolocation accuracy of about 30m and the geocorrected KOMPSAT-3 images provided the geolocation accuracy of about 1m or less. KOMPSAT-3 stereo- and multi-images models yield threedimensional points with sub-meter accuracy in horizontal and vertical direction. Overall, KOMPSAT-3 showed much improved performance in terms of the geolocation accuracy over KOMPSAT-2. KOMPSAT-3 is expected to be able to replace foreign satellite data with sub-meter accuracy level for achieving accurate geometric information.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.485-488
• /
• 2002

DC-DC converter for KOMPSAT 2 has been designed to satisfy input current, and output voltage ripples constraints, in this paper. The converter has been simulated to analyze small signal characteristics. The resulted phase margin of the converter is above $60^{\circ}$. The DC-DC converter has been experimented for 93kHz, 90W output load.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.06a
• /
• pp.23-24
• /
• 2009

허베이스피리트호 원유유출 사고는 2007년 12월7일 아침 7시6분경 서해안 만리포 북서쪽 10km 해상에서 크레인을 적재한 1만1800t급 바지선이 정박 중인 홍콩 선적 유조선 허베이 스피리트호(14만6000t급)와 부딪치면서 발생했다. 이와 같은 기름 유출 사고의 경우, 유출 범위를 정확하게 이해하는 것이 중요하다. 여기서는 위 사고 기간에 얻어진 인공위성 자료를 이용하여 기름 유출을 탐지하기 위한 연구결과를 소개한다. 광학과 마이크로파데이터에 대해 유출 범위의 계산 및 해석 알고리듬에 대한 현재까지의 결과를 소개한다. 광학데이터로는 아리랑 2호(다목적실용위성 2호, KOMPSAT II)) MSC(Multi Spectral Camera)자료가 사용되었으며, 합성개구레이더로는 ENVISAT ASAR, TerraSAR-X 및 ALOS PALSAR의 자료가 사용되었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.10
• /
• pp.1001-1007
• /
• 2013

In the case of multi-mission LEO(Low Earth Orbit) operations, depending on the orbit of each satellite, one ground site is supposed to be communicated with more than two satellites at the same time. On top of that, image data processing system is generally mission-specific and 1:1 backup configuration. For the reason, if ground site has smaller number of antenna than that of satellite, interface with image data processing system would be very complicated. In this paper, considering that two LEO satellites can be operating and image data recording unit in redundancy can be easily plug-in, the implementation of matrix receiving structure is described. This matrix receiving structure has been validated from KOMPSAT-2 and -3(KOrea Multi-Purpose SATellite-2 and -3) since KOMPSAT-3 was launched in May, 2012. This structure will be applied for the KOMPSAT-3A and -5 through its expandability.

• Journal of Astronomy and Space Sciences
• /
• v.24 no.2
• /
• pp.135-144
• /
• 2007

Space environment becomes more hazardous for satellite because of increasing number of space debris. This research is to analyze collision hazards between KOMPSAT 3 in low-earth orbit and space debris generated by the explosion of FengYun satellite on the January 11, 2007. Based on the observed data of the space debris from FengYun satellite, the mass and number distribution of the debris are estimated including undetectable debris from the explosion of FengYun satellite. The spatial density and flux for the space debris can be calculated according to size. This study also brings out the analysis for the assessment of collision probability and damage probability. The algorithm developed in the current paper can be used to estimate the level of risk due to space debris for the satellites that will be launched in the future.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.149-152
• /
• 2007

The horizontal geo-location accuracy of KOMPSAT-2, without GCPs (Ground Control Points) is 80 meters CE90 for monoscopic image of up to 26 degrees off-nadir angle, after processing including POD (Precise Orbit Determination), PAD(Precise Attitude Determination) and AOCS (Attitude and Orbit Control Subsystem) sensor calibration. In case of multiple stereo images, without GCPs, the vertical geometric accuracy is less than 22.4 meters LE 90 and the horizontal geometric accuracy is less than 25.4 meters. There are two types of sensor model for KOMPSAT-2, direct sensor model and Rational Function Model (RFM). In general, a sensor model relates object coordinates to image coordinates The major objective of this investigation is to check and verify the geometrical performance when initial KOMPSAT-2 images are employed and briefly introduce the sensor model of KOMPSAT-2.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.421-424
• /
• 2003

The KOMPSAT-II has a MSC(Multi-Spectral Camera) payload for earth observatory. The image data acquired during the pass over the Korean Peninsula can be sent to the ground station directly. But the image data out of the contact range should be stored temporally for later transmission. The KOMPSAT-II has a device for this purpose called the DCSU(Data Compression and Storage Unit) and the DCSU also performs compression functions for saving storage space and transmission time to send image data to the ground station. In this paper, we'd like to introduce the DCSU memory structures and operation.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.439-444
• /
• 2003

The burial culture has prevailed in our county because of the effect of Confucianism. First of all, tombs've had an negative effect on the vista of national land and caused an ineffective use of national land recently. for this reason, the systematic management of the toms is necessary The purpose of this project is to identify tombs' geographical coordinates from orthoimage and to analysis algorithms for extracting tombs on the satellite image. We've used IKONOS image for those purpose, because it's very similar to KOMPSAT-2 image's characteristics which will be launched near future. and, It will make the best use of tombs management of each local government.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.6_1
• /
• pp.503-509
• /
• 2013

The KOMPSAT-3 (Korea Multi-Purpose Satellite-3), was launched on May 18, 2012, is an optical high-resolution observation mission of the Korea Aerospace Research Institute and provides RPC(Rational Polynomial Coefficient) for ground coordinate determination. It is however need to adjust because RPC absorbs effects of interior-exterior orientation errors. In this study, to obtain the suitable adjustment parameters of the vendor-provided RPC of the KOMPSAT-3 images, six types of adjustment models were implemented. As results, the errors of two and six adjustment parameters differed approximately 0.1m. We thus propose the two parameters model, the number of control points are required the least, to adjust the KOMPSAT-3 R PC. According to the increasing the number of control points, RPC adjustment was performed. The proposed model with a control point particularly did not exceed a maximum error 3m. As demonstrated in this paper, the two parameters model can be applied in RPC adjustment of KOMPSAT-3 stereo image.