• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.4
• /
• pp.409-416
• /
• 2009

The structural design problems are acknowledged to be commonly multi-criteria in nature. The various multi-criteria optimization methods are reviewed and the most efficient and easy-to-use Pareto optimal solution methods are applied to structural optimization of a truss and a beam. The result of the study shows that Pareto optimal solution methods can easily be applied to structural optimization with multiple objectives, and the designer can have a choice from those Pareto optimal solutions to meet an appropriate design environment.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.4
• /
• pp.153-163
• /
• 2004

The main objective of this study is to develop a multi-objective fuzzy optimum design program of steel structures and to verify that the multi-objective fuzzy optimum design is more reasonable than the single objective optimum design in real structural design. In the optimization formulation, the objective functions are both total weight and deflection. The design constraints are derived from the ultimate strength of service ability requirement of AISC-LRFD specification. The structural analysis was performed by the finite element method and also considered geometric non-linearity. The different importance of optimum criteria were reflected with two weighting methods ; membership weighting method and objective weighting method. Thus, designers could choose rational optimum solution of structures with application of two weighting methods.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.1
• /
• pp.73-80
• /
• 2010

The optimal design of water distribution system have started with the least cost design of single objective function using fixed hydraulic variables, eg. fixed water demand and pipe roughness. However, more adequate design is accomplished with considering uncertainties laid on water distribution system such as uncertain future water demands, resulting in successful estimation of real network's behaviors. So, many researchers have suggested a variety of approaches to consider uncertainties in water distribution system using uncertainties quantification methods and the optimal design of multi-objective function is also studied. This paper suggests the new approach of a multi-objective optimization seeking the minimum cost and maximum robustness of the network based on two uncertain variables, nodal demands and pipe roughness uncertainties. Total design procedure consists of two folds: least cost design and final optimal design under uncertainties. The uncertainties of demands and roughness are considered with Latin Hypercube sampling technique with beta probability density functions and multi-objective genetic algorithms (MOGA) is used for the optimization process. The suggested approach is tested in a case study of real network named the New York Tunnels and the applicability of new approach is checked. As the computation time passes, we can check that initial populations, one solution of solutions of multi-objective genetic algorithm, spread to lower right section on the solution space and yield Pareto Optimum solutions building Pareto Front.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.4
• /
• pp.591-598
• /
• 2002

In the ship structural design, the material cost of hull weight and the overall cost of construction processes should be minimized considering safety and reliability. In the past, minimum weight design has been mainly focused on reducing material cost and increasing dead weight reflect the interests of a ship's owner. But, in the past experience, the minimum weight design has been inevitably lead to increasing the construction cost. Therefore, it is necessary that the designer of ship structure should consider both structural weight and construction cost. In this point of view, multi-objective optimization technique is proposed to design the ship structure in this study. According to the proposed algorithm, the results of optimization were compared to the structural design of actual VLCC(Very Large Crude Oil Carrier). Objective functions were weight cost and construction cost of VLCC, and ES(Evolution Strategies), one of the stochastic search methods, was used as an optimization solver. For the scantlings of members and the estimations of objectives, classification rule was adopted for the longitudinal members, and the direct calculation method, GSDM(Generalized Slope Deflection Method), lot the transverse members. To choose the most economical design point among the results of Pareto optimal set, RFR(Required Freight Rate) was evaluated for each Pareto point, and compared to actual ship.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.31 no.2
• /
• pp.25-27
• /
• 1994

최적설계에 대한 두번의 특집을 통해 최적설계, 다목적함수, 민감도 해석, 재설계, 지식기반시스템, 유전적 알고리듬, 신경회로망 등 새로운 방법들이 많이 소개되었다. 이들을 이론적인 배경에 의해 분류하면, 최적화 이론과 인공지능의 두 가지로 크게 나누어 볼 수 있다. 하지만 한편으로는 이들을 '어떻게 하면 더 나은 설계를 할 수 있는가\ulcorner'하는 한가지 목표를 달성하기 위해 제안되고 있는 여러가지 도구들로도 이해될 수 있다. 이글에서는 이 다양한 방법들에 대한 관련성을 설계 방법론이라는 관점에서 설명을 시도하고자 한다.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.5 s.48
• /
• pp.503-513
• /
• 2000

This study treats the criteria, considering the fuzziness occurred by optimization design. And we applied two weighting methods to show the relative importance of criteria. This study develops multi-objective optimization programs implementing plain stress analysis by FEM and discrete optimization design uniformaly. The developed program performs a sample design of 10-member steel truss. This study can carry over the multi-objective optimization based on total system fuzzy-genetic algorithms while performing the stress analysis and optimization design. Especially, when general optimization with unreliable constraints is cannot be solve this study can make optimization design closed to realistic with fuzzy theory.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.3
• /
• pp.395-402
• /
• 2002

This study proposed a muti-objective optimum design method for rational optimizing of orthotropic steel deck bridges. This multi-objective optimum design method was found to be effective in optimizing multi-objective problems, considering cost and deflection functions. It may ve difficult to optimize orthotropic steel deck bridges using a conventional optimization, since the bridges have several parts and show complex structural behaviors. Therefore, the Pareto curve can be obtained by performing the multi-objective optimization for real orthotropic steel deck bridges, using the multi-level technique with excellent efficiency. A reasonable and economical design can be attained using the Parato curve in the cost and deflection functions of the bridge. Thus, more reasonable design values can be determined based on a comparison with those using a conventional design procedure.

• Computational Structural Engineering
• /
• v.7 no.1
• /
• pp.117-124
• /
• 1994

Multi-level Multi-objective optimization(MLMO) for reinforced concrete framed structure is performed, and compared with the results of single-level single-objective optimization. MLMO method allows flexibility to meet the design needs such as deflection and cost of structures using weighting factors. Using Multi-level formulation, the numbers of constraints and variables are reduced at each levels, and the optimization formulation becomes simplified. The force approximation method is used to reflect the variation in design variables between the substructures, and thus coupling is maintained. And the linear approximated constraints and objective function are used to reduce the number of structural analysis in optimization process. It is shown that the developed algorithm with move limit can converge effectively to optimal solution.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.321-321
• /
• 2004

본 연구에서는 웨이퍼 단면 연삭기 구조물의 경량화 고강성화 최적설계를 위하여 가변벌점함수 유전 알고리즘을 이용한 다단계 최적설계 방법을 적용하였다. 구조강성 최대화와 중량 최소화라는 상반된 성질의 목적함수를 최적화하기 위하여 강성의 역수 개념인 컴플라이언스(compliance)를 도입하여 목적함수론 최소화시키는 문제로 만들었으며, 가증방법(weighted method)을 이용하여 다목적 함수를 단일 목적함수로 변환시켰다. 부재 단면형상 최적화 단계와 정적설계 최적화 단계, 및 동적 설계 최적화 단계를 순차적으로 수행하는 다단계 최적설계를 방법을 연삭기 구조물의 최적설계에 적용하였다.(중략)

• Journal of Korean Society of Steel Construction
• /
• v.9 no.3 s.32
• /
• pp.457-465
• /
• 1997

The Shape optimization makes it possible to reduce the weight of structure and cost then member sizing optimization. A vast amount of imprecise information is existed in constraints of the optimum design. It is very difficult and sometimes confusing to describe and to deal with the several criteria which contain fuzzy degrees of relatives importance. This paper proposed weighting strategies in the multiobjective shape optimization of fuzzy structural system by ${\alpha}$-cut approach. The algorithm in this research is numerically tested for 2-bar truss structure. The result show that. the user can choose the one optimum solution in practices as obtaining the optimum solutions according to the ${\alpha}$-cut approach, weight of volume and displacement.