• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.141-146
• /
• 2000

It has many variables and factors to design the friction materials for automotive brake pads. In this study, the friction and wear characteristics of automotive blake pads have been studied using 1:l full size dynamo meter. Using conventional manners, it takes a great of time and efforts to know that it affects the each raw materials for friction characteristics. For the purpose of examining the effect of each major raw materials, we used the more convenient Taguchi L9 ($3^4$) orthogonal matrix and 1/5 scale dynamo machine for evaluation of the friction characteristics of composite brake pads.

• 대한기계학회논문집A
• /
• 제26권4호
• /
• pp.660-666
• /
• 2002

It has many variables and factors to design the friction materials for automotive brake pads. The purpose of this study is to develop the proper method for design of low-cost and to know friction characteristics of each raw materials. For the purpose of examining the effect of each major raw materials, we used the Taguchi L9(3$^4$)orthogonal matrix and 1/5 scale dynamo machine for evaluation of the friction characteristics of composite brake pads. By adapting the Taguchi method, it is easy to investigate the influence of each component in complicated composites friction materials. After analyzing the testing results by the Taguchi method, the effect of factors and levels influenced friction behavior was studied.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 전력전자학술대회 논문집
• /
• pp.232-233
• /
• 2013

본 논문에서는 태양광 인버터에서 전력 품질 개선을 위해서 사용되는 LCL 필터의 설계 방법을 제시한다. 제안된 방법은 생산 품질의 질을 향상시키기 위해 산업체에서 사용되고 있는 다구치 방법론을 이용한다. 기존 설계에서 고려되던 출력 전력 품질(THD), 인덕터의 크기뿐만 아니라 태양광 인버터의 손실, 광량 변화로 인한 입력 조건의 변화, 출력 전압의 변화를 고려하여 설계한다. 설계 결과는 설계 목표 기능 변수를 향상시키고 동시에 그 변동량을 최소화할 수 있다.

• 대한조선학회논문집
• /
• 제43권6호
• /
• pp.693-699
• /
• 2006

This paper proposes a design optimization technique for ship RCS signature reductions using Taguchi method. The proposed technique comprises of i)evaluating initial RCS signatures, ii)defining critical areas which should be modified as design parameters, and threat factors which can't be controlled artificially as noise parameters, and finally iv)finding optimum parameters via analyzing signal to noise ratios for designated characteristics. We applied the technique to a model ship and found that it is suitable for radar stealth designs. In addition, the proposed technique is applicable to submarine designs against sonar threats.

• 기술혁신연구
• /
• 제12권3호
• /
• pp.111-134
• /
• 2004

Current technology innovation or new product development project is composed of various process elements that conduct researches on fundamental technologies. However, with the effects of PERT and CPM, the greater part of the existing project management researches have only focused on the resource allocation and scheduling. But in the multi-project environment, priorities between technology elements need to be considered. Furthermore, a disagreement of opinion between project managers and researchers should be considered. In this study, technology element priority was determined using modified QFD and Taguchi method. Outcome of each method was compared to analyze the difference between project managers and researchers. As a result, QFD method showed relatively high level of consistency between project managers and researchers.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2002년도 추계학술발표회요약집
• /
• pp.134.2-134
• /
• 2002

• 대한기계학회논문집A
• /
• 제37권8호
• /
• pp.1059-1067
• /
• 2013

자동차 연료탱크는 크게 본체와 본체에 조립되는 부품들로 구성되어 있다. 본체에는 차량 주행시에 연료탱크에서 발생되는 증발가스를 배출하고, 연료가 외부로 유출되는 것을 방지하기 위한 여러 밸브들이 조립되어 있다. 하지만 이러한 밸브들은 연료 넘침에 주된 원인으로 알려져 있음에도 불구하고 현재 증발가스의 배출과 기구적인 위치만 고려하여 설계되고 있다. 따라서 본 연구에서는 밸브들의 기존기능을 유지하면서 연료 넘침을 최소화 시키기 위해 근사최적설계를 적용하였고, 다구치 방법을 통해 실제 실험에서 근사최적설계의 유용성을 보였다. 결과적으로 최적화된 밸브 위치를 통해 개발기간과 비용을 절감하였고, 연료 넘침 최소화를 통해 자동차의 신뢰성을 향상시켰다.

• 한국기계가공학회지
• /
• 제3권2호
• /
• pp.3-9
• /
• 2004

The main objectives of this paper are to determine optimum cutting conditions using experimental design method to manufacture pedicle screws. Generally, titanium alloys are known as difficult-to cut materials. In the machining of titanium alloy, high cutting temperature and strong chemical affinity between the tool and the work material are generated because of Its low thermal conductivity and chemical reactivity. Such phenomenon cause increase of tool wear and deterioration of surface quality. Thus, in this paper, required experimental investigations are performed to evaluate the machinability of titanium materials With tungsten carbide tools Required simulation and experiments are performed, and the results are investigated.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.516-519
• /
• 2004

As the optical communication industry is developed, the demand of optical communication part is increasing. ZrO$_2$ ceramic ferrule is very important part which can determines the transmission efficiency and information quality to connect the optical fibers. In general ZrO$_2$ ceramic ferrule is manufactured by grinding process because the demands precision is very high. And the co-axle grinding process of ZrO$_2$ ceramic ferrule is to make its concentricity all of uniform before centerless grinding. This paper deals with the analysis of the process parameters such as grinding wheel speed, grinding feedrate and regulating wheel speed as influential factors, on the concentricity and surface finish developed based on Taguchi's experimental design methods. Taguchi s tools such as orthogonal array, signal-to-noise ratio, factor effect analysis, etc. have been used for this purpose optimal condition has been found out. Thus, if possible be finding highly efficient and quality grinding conditions.

• 한국광물학회지
• /
• 제23권3호
• /
• pp.219-225
• /
• 2010

저등급 석탄인 갈탄(lignite)을 순환 유동층 가스화기(circulating fluidized bed gasifier)의 효과적인 가스화를 위한 공급탄으로 제조하기 위하여 모든 조건들은 동일하고 스크린의 크기만을 변경하여 목적하는 입도분포 특성을 달성하는 최적조건을 찾기 위한 실험을 수행하였다. 가스화기 공급탄은 0.045~1 mm 크기로 85 wt% 이상이 요구되며 이러한 입도분포를 갖는 공급탄을 제조하기 위해서는 경제적이면서도 효과적인 공정 설계가 반드시 필요하다. 따라서 본 연구는 중국산 갈탄을 해머밀로 효과적으로 분쇄하기 위하여 다구치 설계를 사용하였으며, 설계조건에 따른 실험결과 및 통계분석 결과 95% 유의수준에서 1차 스크린의 크기는 3 mm, 2차 스크린의 크기는 1.3 mm인 경우가 최적화된 조건인 것으로 나타났다.