• Composites Research
• /
• v.37 no.4
• /
• pp.363-368
• /
• 2024

Due to the increase in coffee consumption, the amount of coffee grounds is also increasing, which leads to environmental problems. In order to solve these problems, this study proposes the utilisation of coffee grounds. In particular, the porous structure of coffee grounds was utilised to optimise a micro insect screen for filtering fine dust. To realize the porous structure of coffee grounds, a polar/non-polar separation method using KOH and n-hexane was applied to obtain coffee grounds with increased porosity. In addition, the composition of an eco-friendly adhesive was identified to fix the coffee grounds to the screen, and the conditions for homogeneous adhesion of the coffee grounds to the screen were optimised. As a result, we confirmed the effect of the number of coatings of coffee grounds on the filtering effect of fine dust, and found that two coatings of coffee grounds increased the filtering.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.30.2-30.2
• /
• 2011

나노 채널 구조는 반응 물질의 빠른 확산 경로를 제공하고, 넓은 반응 활성화 면적을 가지므로, 센서, 촉매, 전지 등의 다양한 기능성 전기 화학 소자용 고효율 전극 구조로서 관심을 받고 있다. 최근 양극 산화법을 이용하여, 자가 배열된 나노 채널 구조의 주석 산화물을 형성시키는 연구가 진행되고 있다. 그러나, 기재위에 도금된 주석 박막이 양극 산화에 의해 산화물로 변화하는 과정에서 내부 균열 및 표면 기공의 막힘 현상이 관찰되고, 기재 위 주석의 산화가 완료되는 시점에서는 기재의 산화 및 산소 발생에 의한 기계적 충격 등으로 인해 산화물이 기재로부터 탈리되는 문제가 발생하여, 그 응용 연구가 크게 제한되어 있는 실정이다. 본 연구에서는 다공성 주석 산화물 합성 시의 구조적 결함이 나타나는 이유에 대해 체계적으로 분석하고, 이를 바탕으로 결함이 없는 나노 채널 주석 산화물을 제조하는 방법을 제시하였다. 또한, 주석 산화물 박막을 기능성 전기화학 소자용 전극 활물질, 특히 리튬 전지용 음극재료로 사용하기 위한 효과적인 전극 제조 방법에 대해 논의하고, 그에 따라 제조된 전극의 충방전 용량, 사이클링 안정성 등을 제시하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.3
• /
• pp.201-207
• /
• 2020

In this study, various types of porous beams were designed and analyzed to examine the relationship between the behavior of a porous beam and certain nonlocal parameters. The nonlocal parameters were defined as functions of the conditions of defects in the porous material. Finite element analysis was conducted on the beams under typical boundary and loading conditions. Beams with stiffeners having the same dimensions as the defects in the porous beams were also analyzed. The deformation tendency of these beams was determined and described in terms of the nonlocal parameters. The deformation of a porous beam was linearly proportional to the square of the diameters of the defects, whereas that of a beam with a stiffener was linearly proportional to the cube of the diameter of the stiffener. Furthermore, for a stiffened beam with axial loading, the results derived from a 3D solid element and those under 2D plane stress conditions were different.

• Journal of the Korean Ceramic Society
• /
• v.41 no.1
• /
• pp.62-68
• /
• 2004

In this study, SHS process has been employed to fabricate porous $MoSi_2$ material with electric-resistive heating capability through the control of pore size. The preform for SHS reaction was consisted of molybdenum powder with different sizes and silicon powder with different contained quantity. The size of the $MoSi_2$ particles thus formed was determined by the generated heat of combustion, not by the size of molybdenum powder. However, the pore size of $MoSi_2$ composite was proportional to the particle size of molybdenum powder. that is the coarser the molybdenum powder used, the larget the formed pore size. Based on these results, the porous $MoSi_2$ composite could be fabricated with a desired pore size. By orienting the porous molybdenum disilicide-based material in the form of pore size gradient, porous materials used for filters with improved dirt-holding capacity can be manufactured.

• Journal of the Korea Concrete Institute
• /
• v.21 no.5
• /
• pp.557-563
• /
• 2009

This study is on the properties of inorganic porous calcium silicate material made from silica powder through the autoclaving curing, the results of this study should be utilized fundamental data for the development of noise reduction porous solid material using siliceous byproduct generated by various manufacture process. For the manufacture of autoclave curing specimen, various calcareous materials used and siliceous materials used silica powder. In this study, properties in density and compressive strength according to the change of W/B and C/S ratio, microscopy for the shape of pore, SEM and XRD for the examination of hydrate after autoclave curing are carried out respectively. The test results shown that the more slurry density decrease, the more W/B increase at the fresh state, this tendency shown similar to in hardened state. Among the specimens of C/S ratio, the compressive strength of C/S ratio of 0.85 gave the highest the compressive strength. In the results of XRD, tobermorite generated by autoclaving curing was created all of specimens regardless of C/S ratio. To ascertain pore structure, we compared with existing porous calcium silicate product(ALC, organic sound absorbing porous material). The results of microscope observation, pore structure of specimen of this study was similar to that of existing inorganic sound absorbing foam concrete. therefore, we could conformed a possibility of sound absorbing porous solid material on the basis of the results.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.05a
• /
• pp.86-86
• /
• 1998

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.04b
• /
• pp.38-43
• /
• 1993

최근 텔레비젼 화면의 선명도에 대한 일반적인 요구가 높아져서 통신 방식에 있어서도 고품위 텔레비젼(HDD TV)방식의 개발이 진행되고 있다. 선명도의 요망이 높아짐에 따라 CRT(텔레비젼 수상관)의 해상도를 향상시킬 것이 요구되고 있다. 본 연구의 목적은 고온의 프레스 성형공정을 도입하여 정확한 형태로 인바 재료 섀도우마스크를 성형하여 고화질의 CRT를 얻을수 있도록 성형 공정을 확립하고 이를 위한 금형 시스템을 개발하는 데 있다. 본 연구에서는 인바 섀도우 마스크의 열간 재료시험을 통해 온도에 따른 물성 공정을 장대칭단면에 대해 강점소성 유한 요소법을 이용하여 해석하였다

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.217-220
• /
• 2003

The effective thermoelastic properties of porous metals are discussed herein after each material forming process such as hot pressing or extrusion. The voids in metal matrix are assumed to be initially spherical in shape and to be distributed randomly. Once the porous material deforms plastically due to each material forming process, the voids change their shape from a sphere to an ellipsoid and align in one direction. Since the voids are compressible in nature, the void volume fraction is assumed to be decreasing during each material forming process.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.630-631
• /
• 2014

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.28.1-28
• /
• 2003