• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.217.1-217.1
• /
• 2010

본 연구에서는 실제 천연가스 구성성분인 메탄 (90%)+에탄 (7%)+프로판 (3%) 혼합기체를 사용하여 심해저 퇴적부에 존재하는 천연가스 하이드레이트 개발과 가스 하이드레이트 형성법을 이용한 천연가스 수송 및 저장법 개발을 위한 열역학적 특성을 살펴보았다. 천연가스 하이드레이트 개발 연구에서는 심해저 퇴적층의 영향을 살펴보기 위해 기공의 직경이 6.0, 15.0, 30.0, 100.0 nm인 다공성 실리카 젤을 사용하여 기공 직경에 따른 3상(하이드레이트 (H)-물 (LW)-기상 (V)) 평형을 측정하였다. 천연가스 하이드레이트 수송/저장법 연구에서는 천연가스 하이드레이트 형성 압력을 낮추어 줄 수 있는 열역학적 촉진제인 TBAB(농도: 5, 10, 40, 60 wt%)와 THF(농도: 1, 5.56, 10 mol%)를 첨가하여 각각의 농도에 따른 혼합 가스 하이드레이트의 3상 평형을 측정하였다. 그 결과 다공성 매질인 실리카 젤의 경우 기공 직경의 크기가 작아질수록 벌크상태의 하이드레이트에 비해 평형 온도는 낮아지고, 평형 압력은 높아져 저해효과가 커짐을 알 수 있었고, 열역학적 촉진제를 첨가했을 경우 TBAB의 농도가 40 wt%, THF의 농도가 5.56 mol%일 경우 촉진 정도가 가장 크게 나타났으며, 그 이상의 농도일 경우 가스 하이드레이트 형성 반응에 참여하지 않은 TBAB와 THF에 의해 오히려 촉진 정도가 감소하는 것을 알 수 있었다. 또한 $^{13}C$ NMR 분석을 통해 혼합 가스 하이드레이트의 격자 형성과 기체 포집에 따른 구조적인 변화에 대해서도 살펴보았다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.1
• /
• pp.73-79
• /
• 2000

Highly porous amorphous silica obtained from a serpentine mineral by hydrochloric acid treatment was used to produce a zeolite A through the hydrothermal reaction under atmospheric pressure. An optimum synthesis condition of the zeolite A was achieved at $80^{\circ}C$ for two hours with a mole ratio of $Na_2O/SiO_2$1.5. Additionally, it was found that a hydroxysodalite zeolite was formed under the experimental conditions over the reaction temperature of $80^{\circ}C$ and the reaction time of 120 minutes even though the crystallization of zeolite proceeds rapidly as the reaction temperature and the alkalinity becomes higher.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.135-141
• /
• 2020

The silica aerogels with benzene-bridged were designed to have uniform network structure, ordered pore structure, improved mechanical properties and excellent textural properties. Adding organic to enhance the mechanical properties of silica aerogels is a common method, but textural properties of aerogels with organic are reduced due to the organic-inorganic phase separation. In this paper, we use a simple and low-cost method to increase mechanical properties while maintaining textural properties of SiO2 aerogels. Two types of benzene-bridged precursors were prepared to study the effect of the number of hydroxyl band on the textural and mechanical properties. The porous silica aerogel was prepared by a simple, cost effective and pollution-free sol-gel method. This method does not require additional silylating reagents. The benzene-bridged silica aerogel samples prepared had excellent textural properties, high specific surface area (1,326 ㎡/g), porous structure and hydrophobicity (>140°). The mechanical strength of 2T4 is more than 5 times that of pure silica aerogel.

• Applied Chemistry for Engineering
• /
• v.22 no.2
• /
• pp.209-213
• /
• 2011

Hydrophobic silica aerogel beads with low thermal conductivity and high porosity were prepared using a cost-effective sodium silicate as a silica source via an ambient-pressure drying process. Monolithic wet gels were first prepared by adjusting pH (~5) of a diluted sodium silicate solution. The silica aerogel beads (0.5~20 mm) were manufactured by breaking the wet gel monoliths under a simultaneous solvent exchange/surface modification process and an ambient-pressure drying process without using co-precursors or templates. Dried silica aerogel beads exhibit a comparable porosity ($593m^2/g$ of surface area, 34.9 nm of pore size, and $4.4cm^3/g$ of pore volume) to that of the aerogel powder prepared in the same conditions. Thermal conductivity of the silica aerogel beads (19.8 mW/mK at $20^{\circ}C$) is also identical to the aerogel powder.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.168-169
• /
• 2002

일반적인 광섬유가 실리카로 만들어진 클래딩과 이보다 약간 굴절률이 높은 코어로 구성되어 있는 것과는 달리 광자결정 광섬유(photonic crystal fiber 또는 다공성 광섬유(holey fiber))는 코아와 클래딩이 순수 실리카로 구성되어 있다 클래딩의 효과를 주기 위해 광섬유 축을 따라서 규칙적인 공기구멍 다발을 형성하여 준다. 광자결정 광섬유는 특이한 광학적 특성 때문에 최근에 활발히 연구되어 지고 있다. 공기구멍의 구조를 조절함으로써 넓은 파장 영역에서 단일 모드로 진행하고(1), 아주 큰 분산을 갖게 할 수 lT고, hem 반경을 조절 할 수 있으며, 특이한 분산 특성과 이의 조절이 가능하다. (중략)

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2002.05a
• /
• pp.159-160
• /
• 2002

기본매질인 다공성 실리카에 phosphonic acd 관능기를 갖는 폴리스타이렌을 부착시켜 고 산성 조건에서 다가의 금속이온에 대한 홉착능을 향상시킨 이온교환체를 대상으로 Si, Na, P, Ti 등의 성분을 첨가하면서 반응시켜 얻은 생성물을 열처리한 후 열중량 및 XRD분석을 실시하여 유기관능기를 갖는 수지를 무기물화하여 안정화(고형화)하는 방안을 연구하였다.

• Journal of Adhesion and Interface
• /
• v.23 no.3
• /
• pp.70-74
• /
• 2022

Tannic acid, one of plant-derived polyphenols, has been studied as a molecular adhesive, surface modification, energy storage and generating device, and biomedical application as it can interact with biopolymers. In this study, we synthesized porous silica nanoparticles that are widely used in biomedical engineering fields such as drug delivery and bioimaging, and then analyzed tannic acid mediated surface modification of mesoporous silica nanoparticles.

• Membrane Journal
• /
• v.16 no.1
• /
• pp.39-50
• /
• 2006

Porous chitosan and chitin membranes were prepared by using silica particles as porogen. Membrane preparation was achieved via the following three steps: (1) chitosan film formation by casting an chitosan solution containing silica particles, (2) preparation of porous chitosan membrane by dissolving the silica particles by immersing the film into an alkaline solution and (3) preparation of porous chitin membrane by acetylation of chitosan membrane with acetic anhydride. The optimum preparation conditions which could provide a chitosan and chitin membranes with good mechanical strength and adequate pure water flux were determined. To allow protein affinity, a reactive dye (Cibacron Blue 3GA) was immobilized on porous chitosan membrane. Binding capacities of affinity chitosan and chitin membranes for protein and enzyme were determined by the batch adsorption experiments of BSA protein and lysozyme enzyme. The maximum binding capacity of affinity chitosan membrane for BSA protein is about 22 mg/mL, and that of affinity chitin membrane for lysozyme enzyme is about 26 mg/mL. Those binding capacities are about $several{\sim}several$ tens times larger than those of chitosan and chitin-based hydrogel beads. Those results suggest that the porous chitosan and chitin membranes are suitable in affinity filtration chromatography for large scale separation of proteins.

• Analytical Science and Technology
• /
• v.23 no.3
• /
• pp.233-239
• /
• 2010

Pure macroporous silica matrix using a template of polystyrene (PS) was prepared by the sol-gel method. Macroporous Ag-$SiO_2$ composite materials, which were homogeneously dispersed with Ag particles in the macropores, were successfully fabricated. The pure porous silica had ordered pore sizes of 100 nm and 200 nm, which was adjusted under consideration of the template size. The macroporous Ag-$SiO_2$ composite showed the ideal ordered distribution of the pore in case of the adding of 3 wt% $AgNO_3$ under consideration of controlling of the pore size as well as microstructural observation of $AgNO_3$concentration. The macroporous Ag-$SiO_2$ composites had ordered 100 nm and 200 nm pores, and the Ag particles within the matrix showed the size of 15~20 nm.

• Korean Chemical Engineering Research
• /
• v.54 no.3
• /
• pp.293-298
• /
• 2016

A hydrogel electrolyte consisting of 6 M KOH aqueous solution, potassium polyacrylate (PAAK, 3 wt.%), and a hydrophilic silica OX50 (1 wt.%) was prepared to use as an electrolyte medium coated on a Scimat separator of activated carbon supercapacitor. The silica particle distributed homogeneously on surface pores of the separator to increase ionic conductivity and electrochemical stability of the hydrogel electrolyte. The silica addition also involved superior specific capacitance even at higher scan rates due to decrease in interfacial resistance between hydrogel electrolyte and activated carbon electrode.