• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.4
• /
• pp.395-404
• /
• 1994

Ni-graphite composite powders were prepared by reduction of $Ni^{++}$ from ammoniacal nickel sulfate solution on graphite core by hydrogen gas. Effect of reaction factors on the reduction rate and the properties of nickel layer were investigated by SEM, Optical Microscopy, size and chemical analysis. Induction period, a time lag between the injection of hydrogen gas and the start of the reduction, was 20~110 mins and affected by the reaction temperature and stirring speed. The reduction rate of $Ni^{++}$ was $4.5g/{\ell}/min$ at optimum condition and increased with increasing reaction temperature and stirring speed.

• 한국전기화학회:학술대회논문집
• /
• 2004.11a
• /
• pp.131-140
• /
• 2004

• Clean Technology
• /
• v.15 no.1
• /
• pp.47-53
• /
• 2009

Mesoporous aluminas (A-C, A-A, and A-N) were prepared by a templating method using cationic(C), anionic(A), and non-ionic(N) surfactant as a structure-directing agent, respectively. Nickel catalysts supported on mesoporous alumina (Ni/A-C, Ni/A-A, and Ni/A-N) were then prepared by an impregnation method, and were applied to hydrogen production by steam reforming of liquefied natural gas (LNG). Regardless of surfactant type, nickel species were finely dispersed on the surface of mesoporous alumina in the calcined catalysts. It was revealed that interaction between nickel species and support in the reduced catalysts was strongly dependent on the identity of surfactant. LNG conversion and $H_2$ composition in dry gas increased in the order of Ni/A-C < Ni/A-A < Ni/A-N. It was found that catalytic performance increased with increasing nickel surface area in the reduced catalyst. Among the catalyst tested, Ni/A-N catalyst with the highest nickel surface area showed the best catalytic performance.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.3
• /
• pp.117-121
• /
• 2003

Nickel(Ni) powders were prepared from the mixture of nickel chloride and magnesium stearate by a hydrogen reduction process, and the effect of reaction temperature and the addition of magnesium stearate on the chracteristics of the powders were investigated. The effect of size reduction of nickel particles was observed in the presence of magnesium stearate owing to the inhibition of excess growth of paricles. The size reduction and the degree of agglomeration of the particles affected by the amounts of liqiud phase, which related to the increase of magnesium stearate.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.387-390
• /
• 2008

Ni/MgAl 촉매상에서 LPG의 수증기 개질반응을 반응온도 $700{\sim}800^{\circ}C$, 공간속도 $20,000h^{-1}$, 수증기/탄소 비율 $1.0{\sim}3.0$인 조건으로 대기압하에서 수행하였다. 본 연구에서 사용된 촉매들은 공침법으로 제조하였으며, 하이드로탈사이트 구조에서 Ni-MgO 구조로 변환되는 과정에서 활성금속인 니켈이 고분산되는 장점을 지니고 있다. 제조된 촉매는 함침법으로 제조된 촉매보다 활성이 잘 유지되었으며 탄소침적에 대한 내구성 또한 향상되었으나 완벽하게 해결되지는 못하였다. 따라서 이와 같은 문제점을 해결하기 위해 귀금속이 modified된 Ni/MgAl 촉매를 제조하고 반응 특성을 비교하였다. Rh-Ni/MgAl 촉매는 LPG 수증기 개질 반응에서 1024시간동안 활성이 유지됨을 확인하였을 뿐만 아니라 탄소침적 또한 발생하지 않음을 확인하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.312-313
• /
• 2015

무전해 도금은 석출응력이 낮고 작업하기가 용이하기 때문에 산업분야에 있어서 중요한 역할을 한다. 무전해 도금 공정에 있어서, 니켈금속은 차아인산염, 아미노보레인 혹은 수소화붕소 화합물($HBF_4$)에 의한 니켈이온의 화학적 환원에 의해 도금된다. 환원반응이 진행함에 따라서 도금액 중에서 니켈과 차아인산염 이온은 감소한다. 이에 이러한 이온을 보충하기 위하여 도금액 중에 황산니켈과 차아인산나트륨이 일반적으로 첨가된다. 하지만 축적된 인산염, 황산염, 나트륨과 이외의 물질이 전착 박막의 품질을 떨어뜨리고 도금액은 폐기되기도 한다. 니켈회수 속도는 종래의 50% 이하였던 것이 90%이상으로 향상되었다. 이온교환법은 니켈도금 폐액으로부터 니켈회수에 필요한 친환경적이고 원가절감의 기술이라고 사료된다. 특히, 갈탄이 저렴하고 양이온 교환성능이 뛰어나다. 이유는 -COOH, -OH 등의 기능성 그룹을 갖기 때문이다. Fe-P 화합물은 식물에 유용하지 못하고 마그네슘과 칼슘 기반의 석출물은 저렴하고 취급이 용이하며 비료와 같이 재활용이 가능하기 때문에 일반적인 인의 제거 수단이 될 수 있다. 본고에서는 니켈도금 폐액으로부터 인을 제거하는 데 $Ca(OH)_2$, $CaCl_2$와 $CaCO_3$를 채택하여 인이 제거되는 정도를 비교하였고 니켈회수율을 높이기 위하여 갈탄을 사용하였다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11b
• /
• pp.577-582
• /
• 1996

삼중수소수와 수소간의 수소동위원소 교환반응을 수행하였다. 촉매로는 백금/SDB고분자촉매, 백금/활성탄촉매 및 니켈/SiO$_2$-A1$_2$O$_3$촉매를 사용하였다. 촉매층의 높이 및 수소유속이 촉매반응효율에 미치는 영향을 관찰하였다. 수소동위원소 교환반응에는 고분자촉매가 가장 높은 효율을 갖는 것이 확인되었다.

• Applied Chemistry for Engineering
• /
• v.4 no.2
• /
• pp.365-372
• /
• 1993

$CO_2$ methanation was performed over Ni supported on cation-exchanged Y zeolites under atmospheric pressure at $250{\sim}550^{\circ}C$ and $H_2/CO_2$ mole ratio of 4. Adsorption strength between carbon dioxide and nickel was found to be Influenced by the cation exchanged in the zeolite. TPD(Temperature-programmed desorption) results show that the adsorption strength decreases in the order of Ni/NaY>Ni/MaY>Ni/HY. TPSR(Temperature-programmed surface reaction) results indicate that enhanced methanation activity is obtained when the adsorption strength between carbon dioxide and nickel is stroing. As the reduction temperature increases, the methantion activity of the catalyst increase. From this result the larger size nickel particle seems advantageous for $CO_2$ methanation reaction. The maximum activity is obtained when nickel loading is 3.3wt%. Carbon monoxide is produced as a by-product throughout the reaction temperature range, and as the contact time increases, the selectivity to methane increases and the selectivity to carbon monoxide decreases steadily. Thus methane seems to be produced from $CO_2$ via CO as an intermediate species. In the temperature range of $410{\sim}450^{\circ}C$, the methane production rate is found to be dependent on the orders of 3.3~-0.5 and 1.4~3.6 with respect to $CO_2$ and $H_2$ partial pressures, respectively. This clearly shows that $CO_2$ and $H_2$ are competing for adsorption sites and as the reaction temperature increases, it becomes increasingly difficult for $H_2$ to be adsorbed on the catalyst surface.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.157-158
• /
• 2015

$Ni-TiO_2$ 복합체를 전기도금법으로 제조할 때, pH, 전류밀도 변화에 따른 $TiO_2$ 부피분율을 측정하였다. 산화물의 부피분율은 pH가 높아질수록 낮아지고, 전류밀도가 증가하면, $100mA/cm^2$에서 최댓값을 가진 뒤에 감소하였다. 기존의 산화물 공석량 예측식 모델에 수소발생반응을 고려하여 적용한 결과, 기존 모델보다 실험값과 예측값의 정확도가 더 높았다. 따라서, 산화물이 전기도금층에 공석될 때에는 수소이온의 환원반응과 니켈이온의 환원반응을 종합적으로 고려하여야 한다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.1
• /
• pp.1-7
• /
• 2012

This study was performed to develop a low Pt content catalyst as a catalyst for HI decomposition in S-I process. Bimetallic catalysts added various amounts of Pt on a silica supported Ni catalyst were prepared by impregnation method. HI decomposition was carried out using a fixed bed reactor. As a result, Ni-Pt bimetallic catalyst showed enhanced catalytic activity compared with each monometallic catalyst. Deactivation of Ni-Pt catalyst was not observed while deactivation of Ni monometallic catalyst was rapidly occurred in HI decomposition. The HI conversion of Ni-Pt bimetallic catalyst was increased similar to Pt catalyst with increase of the reaction temperature over a temperature range 573K to 773K. From the TG analysis, it was shown that $NiI_2$ remained on the Ni(5.0)-Pt(0.5)/$SiO_2$ catalyst after the HI decomposition reaction was decomposed below 700K. It seems that small amount of Pt in bimetallic catalyst increase the decomposition of $NiI_2$ generated after the decomposition of HI. Consequently, it was considered that the activity of Ni-Pt bimetallic catalyst was kept during the HI decomposition reaction.