• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.312-313
• /
• 2015

무전해 도금은 석출응력이 낮고 작업하기가 용이하기 때문에 산업분야에 있어서 중요한 역할을 한다. 무전해 도금 공정에 있어서, 니켈금속은 차아인산염, 아미노보레인 혹은 수소화붕소 화합물($HBF_4$)에 의한 니켈이온의 화학적 환원에 의해 도금된다. 환원반응이 진행함에 따라서 도금액 중에서 니켈과 차아인산염 이온은 감소한다. 이에 이러한 이온을 보충하기 위하여 도금액 중에 황산니켈과 차아인산나트륨이 일반적으로 첨가된다. 하지만 축적된 인산염, 황산염, 나트륨과 이외의 물질이 전착 박막의 품질을 떨어뜨리고 도금액은 폐기되기도 한다. 니켈회수 속도는 종래의 50% 이하였던 것이 90%이상으로 향상되었다. 이온교환법은 니켈도금 폐액으로부터 니켈회수에 필요한 친환경적이고 원가절감의 기술이라고 사료된다. 특히, 갈탄이 저렴하고 양이온 교환성능이 뛰어나다. 이유는 -COOH, -OH 등의 기능성 그룹을 갖기 때문이다. Fe-P 화합물은 식물에 유용하지 못하고 마그네슘과 칼슘 기반의 석출물은 저렴하고 취급이 용이하며 비료와 같이 재활용이 가능하기 때문에 일반적인 인의 제거 수단이 될 수 있다. 본고에서는 니켈도금 폐액으로부터 인을 제거하는 데 $Ca(OH)_2$, $CaCl_2$와 $CaCO_3$를 채택하여 인이 제거되는 정도를 비교하였고 니켈회수율을 높이기 위하여 갈탄을 사용하였다.

• Clean Technology
• /
• v.19 no.3
• /
• pp.347-350
• /
• 2013

Desorption characteristics for ions adsorbed onto sericite was performed by means of $HNO_3$ solution which was selected as the best desorbing agent in the previous work. Elution of nickel ions adsorbed onto sericite using $HNO_3$ solution was confirmed by means of scanning electron microscopy (SEM) & energy dispersive X-ray spectroscopy (EDX) analysis. Desorption efficiency for nickel ions was 100% at the 20 mM of concentration. Also, nickel ions was completely desorbed within 1.0 of S/L (mg/mL) ratio which is defined as the ratio of adding amount of adsorbent and volume of desorbing agent and desorption process was quickly carried out within 60min. Finally, removal efficiency of reused sericite for nickel ions was constantly maintained until the 4th cycle.

• Journal of the Korean Chemical Society
• /
• v.28 no.2
• /
• pp.121-129
• /
• 1984

The adsorption characteristics of heavy metal ions $(Ni^{2+}$, $Zn^{2+}$) on domestic activated carbon which manufactured from the wood, waste rubber and coal has been studied. The following conclusions were obtained by investigating the effect of pH, halides, cyanide and temperature on the absorption of heavy metal ions and by determining absorption rate and absorption isotherms. When heavy metal ions were adsorbed on activated carbon in the pH range from 6 to 7, treated heavy metal ions were almost come to the equilibrium and recovered in the form of complex anions such as $MX_4^{2- }$and $M(CN)_4^{2-}$ in an hour. The absorption isotherms of heavy matel ions were well fitted in Freundlich's equation. Heavy metal complex anions on activated carbon were easily eluted by using 0.1N HCl solution. These results suggest that the complex anions have unexpectedly strong affinity for the surface of activated carbon.

• Polymer(Korea)
• /
• v.26 no.5
• /
• pp.551-558
• /
• 2002

It was observed that adsorption characteristics of sulfonated fabric ion-exchanger for separating nickel ion from electroplating rinse water. Swelling ratio was increased by increasing degree of sulfonation and polarity of solvent. Ion-exchange capacity was also increased by increasing degree of sulfonation and showed 3.38 meq/g at 16% sulfonated ion-exchanger. There was little effects of pH. Adsorption equilibrium was attained within 10 min, and adsorption rate was 7.5 mg/min. Adsorption capacity was not changed after 7 cycles of regeneration process. Regeneration adsorption capacity was slightly decreased to 2.01 meq/g. It confirmed that durability of sulfonated fabric ion-exchanger was suitable for adsorption process. Adsorption equilibrium time was linearly increased by increasing L/D and adsorption capacity showed the ion exchange capacity within the range of 2.71 ∼ 3.01 meq/g in continuous process. Design of adsorption column could be possible for L/D<2. Under constant L/D condition, there is no little pH effect when rinse water is acidic solution, and operation condition of adsorption process was optimized under pH 5.

• Resources Recycling
• /
• v.20 no.6
• /
• pp.28-36
• /
• 2011

The adsorption of nickel(Ni) from sulfuric acid solution was carried out by ion exchange method. A series of batch tests in synthetic solutions were carried out using Lewatit Monoplus TP 220 resin. The following experimental parameters, such as temperature, shaking rate, reaction time, pH, resin dosage and concentration of nickel ions etc. were investigated to establish the effective optimum conditions of nickel adsorption. The solution pH(2.0~5.0) and shaking rate had little effects on the adsorption of nickel and adsorption time of 72hours was required to reach equilibrium. The experimental results show a good agreement with Feundlich isotherm and pseudo-second order reaction. The adsorption behavior of Ni obtained from synthetic solution was compared with that of waste electroplating solution. Elution of nickel from loaded resin increased with increase in $H_2SO_4$ concentration.

• Resources Recycling
• /
• v.22 no.1
• /
• pp.11-19
• /
• 2013

Recovery of pure cobalt and nickel from diverse resources is important due to the increased demand for these metals. In order to get cobalt and nickel with high purity, separation of them from other metal ions is necessary. In this review, several methods to obtain pure cobalt or nickel solution, such as solvent extraction, ion exchange, precipitation were introduced and compared. For solvent extraction, the advantage and disadvantage of the separation process together with detailed process conditions were investigated.

• Polymer(Korea)
• /
• v.27 no.1
• /
• pp.61-68
• /
• 2003

In this study, we have investigated the preparation of mixed bead and fiber type hybrid ion-exchanger for recovering nickel ion from plating rinse water. There was little dependence of adsorption capacity for nickel ion on the mixing ratio of resin type and fiber type of ion exchangers. However, it increased with increasing the resin content in the mixed bed. It was shown that the data Langmuir and Freundlich's adsorption isotherm model were well fitted to the linear. Affinity between the functional groups in the ion exchanger and nickel ion in the process was confirmed. The pressure drop decreased with increasing the number of stage in the multistage bed, but it increased with increasing the resin content in the mixing bed. The initial breakthrough time in the multistage bed was short due to the increase of number of stage in the continuous process. It was found that the final breakthrough time of the multistage bed was little changed. The breakthrough time decreased with increasing the amount of fibrous ion exchanger in the mixed bed. The maximum adsorption capacities of the mixed and multistage beds were 2.51 meq/g and 2.69 meq/g, respectively. The desorption time for the nickel ion with $1N H_2SO_4$ solution was lower than 10 minutes and the yield of desorption was greater than 98 percent.

• Applied Chemistry for Engineering
• /
• v.28 no.5
• /
• pp.529-533
• /
• 2017

In this work, a new type of biosorbent was prepared from the biochar of Liriodendron tulipifera L. by adding an activation process using water vapor. By using the biosorbent, the removal characteristics of nikel ions in the water phase were investigated. When the equilibrium experiments to remove both 5 and 10 mg/L of nikel ions were performed, the adsorption amount of nickel ions was 4.2 and 5.4 mg/g, respectively. Also, the optimal initial pH was 6 to increase the removal efficiency with respect to two different nickel concentrations of 5 and 10 mg/L. To enhance the removal efficiency of 10 mg/L of nikel ions, a chemical treatment using critic acid was applied for the biosorbent. In addition, 100% removal efficiency was observed for 10 mg/L of nikel ions when the experiment was conducted for 2 h using the modified biosorbent treated by 4 M of critic acid. The results of desorption experiment to recover nikel ions indicated that 0.1 M of nitrilotriacetic acid (NTA) was selected as the optimal desorption agent. Consequently, these experimental results could be employed as an economical and environmentally friendly technology for the development of nickel removal processes.

• Membrane Journal
• /
• v.16 no.1
• /
• pp.77-84
• /
• 2006

Transport mechanisms of nickel ion through a continuous electrodeionization (CEDI) were investigated in terms of electric properties of ion exchange textile (IET). The porous plug model and extended Nernst-Plank (N-P) equation were applied for the description of transport mechanism of nickel ion. The model revealed that the CEDI performance was mainly due to the induced current not accelerated mobility by IET. This study also suggested that optimal operating conditions are attained with minimized electroregeneration region.

• Resources Recycling
• /
• v.12 no.3
• /
• pp.38-45
• /
• 2003

ionic equilbria of nickel chloride in hydrochloric acid solutions were analyzed by considering chemical equilibria, mass and charge balance equations. The activity coefficients of solutes were calculated by using Bromley equation. It was found that most of species containing nickel existed as $Ni^{2+}$ 와 $NiCl^{+}$. The mole fractions of nickel hydroxides were very low in the con-centration ranges considered in this study and the mole fraction of$Ni_4$ $(OH)_{4}^{4+}$ increased greatly with the pH of the solution. The pH values of $NiCl_2$ $-HCl-NaOH-H_2$O system at $25^{\circ}C$ calculated in this study agreed well with those experimentally measured up to ionic strength of 9.4m.