• Journal of KSNVE
• /
• v.5 no.4
• /
• pp.453-460
• /
• 1995

본 논문에서는 정현파 소음을 제어하기 위한 filtered-x LMS에 바탕을 둔 새로운 적응 알고리듬을 제안하였다. 이러한 알고리듬은 두개의 연속적인 계수조정 식으로, 제어기의 계수를 조정한다. 서로 독립인 각 주파수별로 처리하기 때문에 빠른 수렴을 얻을 수 있다. 두번째식은 이차경로로 인한 위상지연을 추정한다. 정현 파 신호 주파수보다 4배 이상 빠른 표본화 주파수를 선택하여 추정된 위상지연 추정 값은 $2{\pi}f_0$만큼 오차를 나타내며, 이 값은 $\pi$2보다 작다. 정현파 신호의 주파수를 알면 이러한 오차는 $2{\pi}f_0$를 더함으로써 제거할 수 있다. 이러한 방법은 위상지연이 $\pi$2보다 큰 경우 수렴속도를 증가시킨다는 사실을 실험을 통하 여 알 수 있다. 추정된 위상지연은 제어기 계수값을 조정하는데 필요한 필터링된 참조신호를 발생시키믄데 사용된다. 참조신호의 위상지연이 각 주파수 성분별로 수행 되기 때문에, 콘볼루션 연산이 생략되어 계산량을 줄일 수 있다. 또한 연속적으로 위상지연을 추정하기 때문에 시변 상황에 적용이 가능하다. 조정식의 수렴조건을 유도하였다. 제안된 알고리듬은 제어기 계수를 추정하는데 바이어스가 없으며, 위상 지연추정을 위한 수렴상수의 최대허용치는 제어기계수에 대한 수렴상수에 반비례함을 이론적으로 분석을 통해 알 수 있다. 모의실험을 통하여 제안된 알고리듬이 filtered-x LMS 알고리듬에 바탕을 둔 다른 알고리듬보다 환경변화에 우수한 성능을 보임을 알 수 있다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.11a
• /
• pp.93-96
• /
• 2014

본 논문에서는 가상시점 영상을 생성할 때 발생하는 홀 영역을 효율적으로 채우는 방법을 제안한다. 가상시점 영상을 생성하려면 우선 깊이 영상에 대해 3차원 워핑을 수행한 뒤, 이때 발생하는 작은 홀을 미디언 필터를 이용하여 적절히 채워야 한다. 홀이 채워진 깊이 영상을 기반으로 하여 입력받은 참조 컬러 영상에 대해 3차원 워핑을 수행하여 가상 위치에 새로운 시점 영상을 생성하게 된다. 이때 또한 마찬가지로 3차원 워핑을 수행하기 때문에 홀 영역이 발생하게 된다. 텍스쳐 영상을 워핑하여 새로운 좌표계로 옮긴 영상은 주변 컬러 화소들과의 관계들을 가지고 있다. 텍스쳐 영상을 워핑한 결과 영상에서 발생하는 홀 영역을 채우기 위해 방향성을 고려한 홀 채움 방법을 사용한다. 홀 주변 화소 영역의 값들을 홀을 채우게 될 후보 화소 값으로 설정한 뒤, 각각의 화소값에 대해 비용값을 계산한다. 이때 가장 적은 비용값을 갖게 하는 주변 화소 값을 해당 영역의 홀 채움 값으로 사용하게 된다. 좌영상과 우영상을 워핑할 때 발생하는 홀 영역의 위치가 각각 다르게 나타난다. 홀 영역은 배경화소 값을 이용해 채울 경우 자연스러운 결과를 보인다. 배경화소 값을 이용하기 위해 좌영상과 우영상에 따른 새로운 홀 스캔 방향 또한 제안한다. 능동적으로 홀 스캔 방향을 선택하여 홀 주변 화소값들을 스캔해가며 워핑 결과 발생하는 홀 영역을 효율적으로 채우게 된다. 결과적으로 제안한 방법을 통하여 생성된 가상시점 영상의 화질이 좋아지는 결과를 확인할 수 있었다.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.3
• /
• pp.106-113
• /
• 1997

A 3V CMOS continuous-time fully-balanced integrator for low-voltage analog-digital mixed-mode signal processing is designed in this paper. The basic architecture of the designed fully-balanced integrator is complementary circuit which is composed of NMOS and PMOS transistor. And this complementary circuit can extend transconductance of an integrator. So. the unity gain frequency, pole and zero of integrator are increased by the extended transconductance. The SPICE simulation and small signal analysis results show that the UGF, pole and zero of the integrator is increased larger than those of the compared integrtors. The three-pole active low-pass filter is designed as a application circuit of the fully-balanced integrator, using 0.83V CMOS processing parameter.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2569-2574
• /
• 2012

HMS(Hull Mount Sonar) equipment mounted on PCC(Patrol Combat Corvette) is suitably designed for active mode, and the specific character of sensor or system is not appropriate for the frequency range to detect a torpedo. In this article, in order to implement the function of detecting torpedoes with HMS of existing PCC, I will analyze the feature of input signals each PCCs and design a circuit to compensate reversely for the input signal in certain frequency. And also, I will suggest the most adequate torpedo defense system suitable for the special operating environment and the characteristic of naval vessels, implementing functions such as AGC of input signal and fixing the frequency range of different input signals per different warships.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.6
• /
• pp.27-32
• /
• 2010

77GHz FMCW(Frequency Modulation Continuous Wave) radar system has been used for automotive active safety systems. In typical automotive radar, the moving target detection and clutter cancellation including stationary targets are very important signal processing algorithms. This paper proposed the moving target detection algorithm which improve the detection probability and reduce the false alarm rate. First, the proposed moving target beat-frequency extraction filter is used in order to suppress clutter, and then the data association is applied by using the extracted moving target beat-frequency. Then, the zero-Doppler target is eliminated to remove the rest of clutter.

• Convergence Security Journal
• /
• v.8 no.1
• /
• pp.49-56
• /
• 2008

Recently, Phising attack uses trick of URL and sites, and technical concealment method which infiltrates sophisticated malicious code. However, sometimes Phising security technology cannot cover all of Phising methods. Consequently, this research proposes inspection to solve this problem. First, we can install Proxy server for a strong open information exchange of web environment between web servers and clients. Therefore, it compares and analyzes harmful site and Phising URL with White domain list, and filters them. Finally, designs for stable web based information so that we can block Phising with least regulation and active control. So the purpose of this paper is introducing this design system and structure, and inspect them.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2549-2552
• /
• 1999

The fictitious power theory in time domain is very easy to understand, but power analyzing time of active power is increased, because power is analyzed using signal techniques based on the correlation between voltage and current waveforms. Also, conventional methods in time/frequency domain to evaluate the compensation performance of active power filters are not provided easy solutions. So, the authors have previously proposed 3-D current coordinates which is composed into active component, fundamental reactive component and distorted component of nonlinear loads current. This method has excellent performance, but can not evaluate the characteristics of nonlinear load current whether inductive or capacitive. Therefore, To overcome problems mentioned previously, this paper deals with the simple instantaneous power theory and the modified 3-D current coordinates for evaluating the compensation performance of active power filters. To confirm the validity, active power filters simulator is developed using C-language. From the simulation, results are discussed their utility.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.2E
• /
• pp.5-13
• /
• 1994

Simulation of the target-scattered echo requires the understanding of scattering mechanism at the highlight points. In this paper, the basic assumption of Highlight Model is reviewed through the analyzed data obtained in the acoustic water tank experiment. The analysis shows that the scattering mechanism involves pulse elongation and frequency shift as elements of target-scattered echo, and that the internal structures affect the temporal response of the target-scattered echo significantly. The band-limited impulse response or Green's function due to the diffraction from highlight points of internal structures is not mere delta function, but acts like a filter, which causes frequency shift and is elongated in time.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.267-273
• /
• 2011

The importance of networking capability is gaining more weight for enterprise business and high-speed Internet access with guaranteed security management is essential to companies. This paper presents a unified network security management solution to support high-speed Internet access, active security management, traffic classification and control. The presented system provides firewall, VPN, intrusion detection, contents filtering, traffic management, QoS management, and history log functions in unified manner implemented in a single appliance device located at the edge of enterprise networks. This will enable cost effective unified network security solution to companies.

• Journal of KSNVE
• /
• v.9 no.1
• /
• pp.121-130
• /
• 1999

Generally, A Dynamic Absorber by using Active viscous Damping is highlighted for effective suspension system, such as improved ride comfort and handling in the market. Lately, this system based on the Sky-Hook damper theory is introduced by the name of "Active Dynamic Absorber" to us. This system has an excellent performance in contrast to Passive. Adaptive Dynamic Absorber, besides having low cost components of system, low energy consumption. light weight of system. In this viewpoint. most of car-maker will adopt this system in the near future. For this reason, we developed Dynamic Absorber by using Active viscous Damping which is equipped with continuously variable Dynamic Absorber and Control logic consisting Filter and Estimator. control apparatus of Dynamic Absorber operated by 16-bit microprocessor of high performance. variable device of viscous Damping. G-sensor so on. In this paper. several important points of development procedure for realizing this system will be described with results in which is obtained from experiment by simulation and Full car test in Proving ground. respectively.pectively.