• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.963-972
• /
• 2002

선박 거주구는 승무원 및 여객들이 상주하는 곳으로서 대형 상선의 경우 주선체 상부에 건물형태의 높은 구조이므로, 선박의 불균형력과 프로펠러 기진력으로 인해 주 선체와 연성되어 진동이 발생한다. 대형상선의 거주구는 육상구조물과는 달리 주선체와 마찬가지로 강성은 일정하나 화물적재량의 변화에 따라 선박 거주구의 유효질량이 변화함으로 가변적인 진동특성을 갖는 구조물 중의 하나이다. 본 연구에서는 가변 동특성을 갖는 대형상선의 거주구 진동을 수동형 및 능동형 흡진장치를 통하여 제어할 경우 거주구의 고유진동수 변화에 따른 제어성능의 변화를 반영할 수 있으면서도 제어성능과 안정성이 뛰어난 강건제어 시스템의 설계 가능성을 수치 시뮬레이션을 통하여 확인하고자 하였다. 적용대상은 진동문제가 많이 발생하는 컨테이너 운반선과 초대형 원유운반선의 거주구 진동특성을 3차원 유한 요소법을 이용하여 검토하고, 실험적인 방법으로는 거주구 형태의 구조물의 질량변화에 대한 동조형 흡진기의 제어성능을 시험과 선형이차 진동제어 장치의 진동제어성능 실험결과를 소개하고자 한다.

• Journal of KSNVE
• /
• v.10 no.6
• /
• pp.1083-1093
• /
• 2000

This paper is concerned with the real-time automatic tuning of the positive position feedback controller for smart structures by the genetic algorithms. The genetic algorithms haute proven its effectiveness in searching optimal design parameters without falling into local minimums thus rendering globally optimal solutions. The advantage of the positive position feedback controller is that if it is tuned properly it can enhance the damping value of a target mode without affecting other modes. In this paper, we develop for the first time a real-time algorithm for determining a tuning frequency of the PPF controller based on the genetic algorithms. To this end, the digital PPF control law is downloaded to the DSP chip and a main program, which runs the genetic algorithms in real time, updates the parameter of the controller in real time. Hence, any kind of control including the positive position feedback controller can be used in adaptive fashion in real time. Experimental results show that the real-time tuning of the positive position feedback controller can be achieved successfully. so that vibrations are suppressed satisfactorily.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.538-539
• /
• 2010

자기 베어링 시스템은 축과 베어링간의 자기적 힘을 이용하여 축을 비접촉으로 지지함으로써 고속으로 회전하는 회전체의 마찰손을 저감시킨다. 고속 회전체에 편심(Eccentricity)이 있을 경우 편심 질량으로 인한 원심력이 속도의 제곱에 비례하여 발생하게 되고, 축을 지지하고 있는 베어링에 과도한 진동을 유발하게 된다. 베어링에 전해지는 진동이 커지게 되면 진동 자체도 문제일 뿐 아니라 베어링이 부담해야 하는 힘의 크기가 커지게 되어 자기 베어링 및 이를 구동하는 전력전자 기기의 용량을 증가시켜야 하는 문제가 있다. 본 논문에서는 베어링의 지지력을 능동적으로 제어하는 능동 자기 베어링을 사용하여 축의 편심 질량의 크기 및 편심 위치를 파악하고 회전 관성 중심점으로 축을 회전시킴으로써 회전 진동을 저감하는 방법을 제안하고, 실험 결과로써 제안된 방법의 타당성을 검증한다.

• Journal of Korean Association for Spatial Structures
• /
• v.6 no.3 s.21
• /
• pp.59-67
• /
• 2006

A conventional passive TMD is only effective when it is tuned properly. In many practical applications, inevitable off-tuning of a TMD occurs because the mass in a building floor could change by moving furnishings, people gathering, etc. when TMDs are offtuned, TMDs their effectiveness is sharply reduced. Moreover, the off-tuned nTMDs can excessively amplify the vibration levels of the primary structures. This paper discusses the application of a new class of MR damper, for the reduction of floor vibrations due to machine and human movements. The STMD introduced uses a MR damper called to semi-active damper to achieve reduction in the floor vibration. Here, the STMD and the groundhook algorithm are applied to a single degree of freedom system representative of building floors. The performance or the STMD is compared to that or the equivalent passive TMD. In addition, the effects of off-tuning due to variations in the mass of the floor system. Comparison of the results demonstrates the efficiency and robustness or STMD with respect to equivalent TMD.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.5
• /
• pp.455-460
• /
• 2011

In this work, an active hybrid mount using piezostack actuator and rubber element is manufactured, and its vibration control performance is evaluated via feedforward control. A hybrid active mount featuring inertia type of piezostack actuator is proposed and manufactured. After describing the configuration of the hybrid mount, a mount system is then constructed. To attenuate vibrations from vibration sources, a feedfoward controller is experimentally implemented to the system. Vibration control performances are evaluated at each mount. Effective control performances such as accelerations are obtained and presented in frequency domains.

• The Journal of the Acoustical Society of Korea
• /
• v.7 no.2
• /
• pp.5-19
• /
• 1988

The feedback controllers for the active vibration control of elastic systems are developed using optimal regulator, optimal tracking, time optimal and noise observer algorithms. Using the modal analysis of the elastic systems, the effects of the actuator positions, the input weighting factor and the magnitude of the constraint of the actuator force are investigated.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.109-109
• /
• 2004

구조물에 있어서 진동은 소음을 유발하며 구조물을 불안정하게 만드는 요인이 된다. 특히, 저주파 진동은 구조물에 미치는 영향이 크므로, 유연구조물의 저주파 진동모드들을 우선적으로 제어할 필요가 있다. 본 논문에서는 압전세라믹을 작동기로, 압전필름을 감지기로 사용하였고, 능동 제어 알고리즘의 하나인 적응형 디지털 PPF(Positive Position Feedback) 제어기를 구성하여 유연 외팔 평판과 열린 박스 구조물에서 저주파 진동을 감소시켰다.(중략)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.85-90
• /
• 2011

In this work, an active hybrid mount using piezostack actuator and rubber element is manufactured, and its vibration control performance is evaluated via feedforward control. A hybrid active mount featuring inertia type of piezostack actuator is proposed and manufactured. After describing the configuration of the hybrid mount, a mount system is then constructed. To attenuate vibrations from vibration sources, a feedforward controller is experimentally implemented to the system. Vibration control performances are evaluated at each mount. Effective Control performances such as accelerations are obtained and presented in frequency domains.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.1
• /
• pp.25-30
• /
• 2013

In military vehicles moving over poor roads, severe vibration of the chassis can damage internal components. Currently, many studies have focused on active and semi-active suspensions to reduce the vibration of the chassis. In this study, a vibration reduction technique is suggested by applying a unique rotating suspension structure. SH-ADD, a type of modified Skyhook, was selected as a controller for vibration reduction. A random ISO class E road was selected as the driving road. The simulation was performed using ADAMS Control and Matlab Simulink. The control result was compared with the RMS acceleration with a focus on the cumulative fatigue of the internal equipment.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.2 s.46
• /
• pp.325-331
• /
• 2007

This paper proposed modelling and design method in suspension system design to analyze active suspension equipment by adopting active robust control theory. Recent in the field of suspension system design it is general to adopt active control scheme for stiffness and damping, and connection with other vehicle stability control equipment is also intricate, it is required for control system scheme to design more robust, higher response and precision control equipment. It is known that active suspension system is better than passive spring-damper system in designing suspension equipment. We analyze suspension system with considering location of front-rear wheel and driving velocity, then design control system. Numerical example is shown for validity of robust control system design in active suspension system.