• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.527-535
• /
• 2012

This paper reports the active vibration control of plates using positive position feedback controller (PPF). The equations of motion of the plate under force and moment pairs were derived and the equations of PPF controllers were formulated. The effect of the parameters - gain and damping ratio - of the PPF controllers on the open loop transfer function was investigated mainly in terms of the system stability. Increasing the gain of the PPF controller tuned at a mode, the magnitude of the open loop transfer function is increased at all frequencies without changing the phase behavior. The increase of the damping ratio of the PPF controller leads to decrease the magnitude of the open loop transfer function and to modify its phase characteristics to be more stable. Two PPF controllers connected in parallel, Each PPF controller is tuned at the $1^{st}$ and $2^{nd}$ modes, respectively. Their parameters were determined to remain the system to be stable based on the results of the parametric study. A significant reduction in vibration at the 2 modes can be obtained.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.11a
• /
• pp.266-269
• /
• 2010

급속한 정보 통신 기술의 발달로 인해 멀티미디어 재생 개발 기술들은 단순히 수동적으로 보고 듣는 재생 기술에서 벗어나 청취자 감성, 취향 등에 따라 보다 실감 있고 사용자가 능동적으로 재생할 수 있는 기술로 진화 하고 있다. 지금까지의 오디오 서비스는 음원 개발자 중심의 오디오 서비스, 즉 보컬 및 모든 악기가 믹스된 단일음원이기 때문에 사용자는 단순히 오디오 음원 개발자나 음반 제작사가 발매한 단일 음원을 일방적으로 수동적 청취할 수밖에 없다. 하지만 사용자 능동형 오디오 서비스에서는 사용자가 능동적으로 자신이 원하는 음악적 취향에 따라 능동적으로 각각의 객체 기반의 독립 음원을 선택, 감성에 따른 음원 효과 추가, 최적의 음원 청취 위치(Sweet Spot) 변경, 음원 및 스피커 재생 공간 및 위치 변경 재생 등을 할 수가 있다. 본 논문에서는 디지털 음원들을 입력받아 임의의 필터링을 실행하고, 사용자 음원 보정 정보, 출력 유닛의 공간적, 음향적 특성을 상위제어기로부터 입력받아 전신호경로 상에 디지털 신호처리 하여 출력신호를 생성하는 DSP 시스템 플랫폼 및 알고리즘에 관하여 소개한다.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.6
• /
• pp.15-23
• /
• 1994

This paper described adaptive ANC (Active Noise Control) systems for noise canacelling in multiple inputs and multiple outputs channel. Until this time, it was reported that the study of AMC for the multiple inputs and the multiple outputs had no correlation between input signals of adaptive filters. In fact, it is difficult independently to check the noise source signals and insufficient about this study. In this paper we proposed to use the adaptive filter for eliminating the correlation between input signals. The simulation results showed that the convergence rate improved about two times with this filter than that one without this filter at the rate $b_{12}=0.95$.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.218-223
• /
• 1997

The technique used is the active structural acoutrol (ASAC)approach which involves controlling the acoustic response of a panel-cavity covpled system by applying oscillating force inputs in the form of prezoelectric actuators directly to the flexible panel. The linear quadratic Gaussian control scheme is used for attenuating nosie inside the rectangular enclosure causing by flexible wall vibration. Results indicated the application of control inputs to the radiating wall resukted in considerable noise reductions inside the cavity. Auso,the possibility of application to the more complicated fluid-structure coupled system is verified.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.6
• /
• pp.436-444
• /
• 2016

Uniformity in transducer performance is a must-have to ensure the reliable acoustic performance of a tile projector, used for active echo reduction. However, practical limitations imposed by variations in material properties and fabrication errors lead to performance variations among unit transducers, which could degrade the radiation characteristics (transmitting voltage response and directivity) of the tile projector and ultimately the echo reduction performance. In this paper we present a method to minimize these adverse effects via an appropriate placement of unit transducers within the tile projector. To this end, we perform a series of coupled acoustic-piezoelectric simulations, assuming a group of 36 unit transducers having 6 dB variations in transmitting voltage response, to analyze and compare the radiation characteristics of tile projectors under different transducer placement schemes.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.798-803
• /
• 2003

The objective of the present study is to investigate the changes in the acoustic source characteristics and far-field noise propagation in an incompressible round jet at Re=10000 for single-frequency excitations using large eddy simulation and Lighthill acoustic analogy. We apply excitations at a frequency corresponding to the jet-column mode ($St_{D}=0.85$) or maximum growth rate in the shear layer ( $St_{\theta}=0.017$ ). The acoustic source derived from the Lighthill acoustic analogy is the second spatial derivative of the Reynolds stresses. In the case of $St_{D}=0.85$, vortex ring and large scale structures are dominant sources, whereas in the case of $St_{\theta}=0.017$, the main sources are located at an upstream position along the shear layer than in the uncontrolled case. Also, the far-field noise propagates along the axial direction due to excitation.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.2
• /
• pp.21-32
• /
• 1996

The performance of the energy density control algorithm for controlling a broadband noise is evaluated in a one-dimensional enclosure. To avoid noncausality problem of a control filter, which often happens in a frequency domain optimization, analyses presented in this paper are undertaken in the time domain. This approach provides the form of the causally constrained optimal controller. Numerical results are presented to predict the performance of the active noise control system, and indicate that imp개ved global attenuation of the broadband noise can be achieved by minimizing the energy density, rather than the squared pressure. It is shown that minimizing the energy density at a single location yields global attenuation results that are comparable to minimizing the potential energy. Furthermore, unlike the squared pressure control, the energy density control does not demonstrate any dependence on the error sensor location for this one-dimensional field. A practical implementation of the energy-based control algorithm is presented. Results show that the energy density control can be implemented using the two sensor technique with a tolerable margin of performance degradation.

• The Journal of the Acoustical Society of Korea
• /
• v.9 no.6
• /
• pp.53-61
• /
• 1990

Real-time implementations of the active adaptive noise controller are proposed and tested. There are three problems in active noise control such as real-time processing, an acoustic feedback of secondary signal and a time-delay of control system elements. For real-time processing, the DSP56001 was used. To avoid acoustic feedback, the secondary signal was excluded from prediction. And for compensation of time delay, the ahead prediction was applied. As the primary noise is reflected in space, the reflected noise should be controlled for perfect noise control. But in this case, the controller might be unstable. For solving the problem, it is proposed that the source noise and the reflected noise are predicted separately. Some experimental results show the stability and effectiveness of the proposed controller.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2302-2312
• /
• 2000

An active control of the transmission of noise through an aircraft fuselage is investigated numerically. A cylinder-cavity system was used as a model for this study. The fuselage is modeled as a fi nite, thin shel cylinder with constant thickness. The sound field generated by an exterior monopole source is transmitted into the cavity through the cylinder. Point force actuators on the cylinder are driven by error sensor that is placed in 3D cavity. Modal coupling theory is used to formulate the numerical models and describe the system behavior. Minimization of the acoustic potential energy in the fuselage is carried out as a performance index. Continuous parameter genetic algorithm is used to search the optimal actuator position and both results are compared.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06d
• /
• pp.80-83
• /
• 1998

In this paper, we propose a new filtered-x least mean fouth (LMF) algorithm where the error raised to the power of four is minimized and analyze its convergence behavior or a multiple sinusoidal acoustic noise and Gaussian measurement noise. Application of the filtered-x LMF adaptive filter to active noise cancellation (ANC) requires estimating of the transfer characteristic of the acoustic path between the ouput and error signal of the adaptive canceller. The results of the convergence analysis of the filtered-x LMF algorithm indicates that the effects of the parameter estimation inaccuracy on the convergence behavior of the algorithm are characterized by two distinct component . Phase estimation error and estimated again. In particular , the convergence is shown to be strongly affected by the accuracy of the phase response estimate. Also, we newly show that convergence behavior can differ depending on the relative sizes of the Gaussian measurement noise and convergence constant.