• Horticultural Science & Technology
• /
• v.33 no.3
• /
• pp.375-382
• /
• 2015

A controlled atmosphere (CA) regimen was optimized during 3 consecutive harvest seasons as the basis of practical modified atmosphere packaging (MAP) storage for quality maintenance and extension of storage potential of fresh Ligularia fischeri leaves. Leaves were harvested in April or May and forced-air cooled to $4^{\circ}C$ before punch-hole MAP (control, where gas concentrations were same as air) and CA treatments. CA regimens adjusted stepwise during 3 experimental years were: 1 and 3% $O_2$, respectively combined with 5 and 10% $CO_2$ in the first year, 3% $O_2$ fixed in combination with 0, 2.5, and 5% $CO_2$ in the second year, and 3% $O_2$ fixed in combination with 2.5 and 5% $CO_2$ in the third year. In the first year, higher incidence of black discoloration was observed with the reduction of respiration under 10% $CO_2$ CA conditions regardless of $O_2$ levels at 1 or 3%. In the second and third year, the incidence of the disorder seemed not to be clearly relevant to CA conditions showing slightly higher incidence only after 4- or 5-week storage + 5-day shelf life. Although texture and appearance quality were maintained better under the 3% $O_2$ + 2.5% $CO_2$condition after 4-week storage + 5-day shelf life, effects of CA on the extension of storage period was slight. Overall results indicated that Ligularia fischeri leaves are very susceptible to $CO_2$ injury. $CO_2$ concentration should be adjusted below 2.5% for safe and effective CA or MAP storage to maintain quality even during short-term storage.

• Journal of Korean Medicine Rehabilitation
• /
• v.19 no.1
• /
• pp.135-143
• /
• 2009

Objectives : Low back pain(LBP) is a common disabling disease in clinical practice and loss of working hours due to this condition is huge. The aim of this study was to determine if there was an association between fat deposit of paraspinal muscles as observed on MRI scans in patients presenting with unilateral LBP. Methods : 24 patients who visiting our hospital with a clinical presentation of unilateral LBP were recruited to the study. Patients were between 20 and 30 years and had a history of unilateral LBP within 12 months. After MRI scaning, the images were saved in DICOM file format for Picture Archiving and Communication System(PACS). The percentage of fat infiltrated area was measured using a pseudocoloring technique. Data were analyzed comparing the fat deposits of the muscles on the symptomatic and asymptomatic sides. Paired t-test was used to find the difference between the measurements of fat tissue in individual patients. Results : The amount of fat in the symptomatic side was $7.6{\pm}4.51%$, asymptomatic side was $6.7{\pm}4.29%$. There were increases, statistically significant, in the fat changes of the paraspinal muscles at the L4-5 disc level(P <0.05). Also, men were likely than women to have more fat deposit in symptomatic side(men $8.5{\pm}5.1%$, women $6.5{\pm}3.6%$). Conclusions : The amount of fat in the symptomatic side shows significantly increased than asymptomatic side in the paraspinal muscles at the L4-5 disc level. It suggested that fat infiltration in the muscles associated with LBP. Further studies will be needed to confirm the relationship between the muscle fatty changes and LBP in the large sample size. In addition, the correlation of pain severity with fat infiltration needs to be addressed.

• The Korean Journal of Pesticide Science
• /
• v.19 no.3
• /
• pp.210-217
• /
• 2015

Ipfencarbazone is a herbicide of the tetrazolinone class, and is believed to be an inhibitor of very long chain fatty acids (VLCFAs), which control cell division in weeds. The objective of this study was to develop and validate an official analytical method for ipfencarbazone determination in agricultural products. The ipfencarbazone residues in agricultural products were extracted with acetone, partitioned with n-hexane, and then purified through silica SPE cartridge. Finally, the analyte was quantified by gas chromatograph-electron capture detector (GC-ECD) and confirmed with gas chromatograph/mass spectrometer(GC/MS). The linear range of ipfencarbazone was 0.01 to 1.0 mg/L with the coefficient of determination ($r^2$) of 0.9999. The limit of detection (LOD) and quantification (LOQ) was 0.003 and 0.01 mg/kg, respectively. In addition, average recoveries of ipfencarbazone ranged from 80.6% to 112.3% at the different concentration levels LOQ, 10LOQ and 50LOQ, while the relative standard deviation was 2.2-8.6%. All values were consistent with the criteria ranges requested in the CODEX guidelines. Furthermore, and inter-laboratory study was conducted to validate the method. This proposed method for determination of ipfencarbazone residues in agricultural products can be used as an official analytical method.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.3
• /
• pp.154-160
• /
• 2017

BACKGROUND:This study was carried out to establish an efficient sample preparation for the simultaneous determination of bisphenols (BPs) in river water samples using gas chromatography-mass spectrometry (GC-MS). Sample preparation was examined with conventional extraction methods, such as solid-phase extraction (SPE) and liquid-liquid extraction (LLE), and their efficiency was compared with validation results, including linearity of calibration curve, method detection limit (MDL), limit of quantification (LOQ), accuracy, and precision. METHODS AND RESULTS:The BPs (bisphenol A, BPA; bisphenol B, BPB; bisphenol C, BPC; bisphenol E, BPE; bisphenol F, BPF; bisphenol S, BPS) were analyzed using GC-MS. The range of MDLs by SPE and LLE methods was $0.0005{\sim}0.0234{\mu}g/L$ and $0.0037{\sim}0.2034{\mu}g/L$, and that of LOQs was $0.0015{\sim}0.0744{\mu}g/L$ and $0.0117{\sim}0.6477{\mu}g/L$, respectively. The calibration curve obtained from standard solution of $0.004{\sim}4.0{\mu}g/L$ (SPE) and $0.016{\sim}16{\mu}g/L$ (LLE) showed good linearity with $r^2$ value of 0.9969 over. Accuracy was 93.2~108% and 97.4~120%, and precision was 1.7~4.6% and 0.7~6.5%, respectively. The values of MDL and LOQ resulted from the SPE method were higher than those from the LLE method, particularly those values of BPA were highest among the BPs. Based on the results, the SPE method was applied to determine the BPs in river water samples. Water samples were collected from mainstream, tributary and sewage wastewater treatment plants (SWTPs) in the Yeongsan river basin. The concentration of BPB, BPC, BPE, BPF and BPS were not detected in all sites, whereas BPA was ranged $0.0095{\sim}0.2583{\mu}g/L$, which was $0.0166{\sim}0.0810{\mu}g/L$ for mainstreams, $0.0095{\sim}0.2583{\mu}g/L$ for tributaries, $0.0352{\sim}0.1217{\mu}g/L$ for SWTPs. CONCLUSION: From these results, the SPE method was very effective for the simultaneous determination of BPs in river water samples using GC-MS. We provided that it is a convenient, reliable and sensitive method enough to monitor and understand the fate of the BPs in aquatic ecosystems.

• Journal of Food Hygiene and Safety
• /
• v.33 no.4
• /
• pp.296-305
• /
• 2018

Spiroxamine, one of fungicides, is used to control powdery mildew in various crops and black yellow sigatoka in bananas. The major strength of spiroxamine is to control powdery mildew in various crops and bananas yellow sigatoka in bananas. The compound has shown a high level of activity, good persistence and crop tolerance. Besides powdery mildew, good control of rust, net blotch and Rhynchosporium diseases been indicated in cereals, together with a complementary activity against Septoria diseases. In 2017, the maximum residue limit (MRL) of spiroxamine established in Korea. According to Ministry of ood and rug afety) regulations, spiroxamine residues defined only parent compound. Thus, a analytical method is needed to estimate the residue level of the parent compound. The objective of this study was to develop and validate analytical method for spiroxamine in representative agricultural commodities. Samples were extracted with acetonitrile and partitioned with dichloromethane to remove the interfering substances. The analyte were quantified and confirmed liquid chromatograph-tandem mass spectrometer (LC-MS/MS) in positive-ion mode using multiple reaction monitoring (MRM). Matrix matched calibration curves were linear over the calibration ranges ($0.0005{\sim}0.1{\mu}g/mL$) for the analyte in blank extract with coefficient of determination ($r^2$) > 0.99. For validation purposes, recovery studies will be carried out at three different concentration levels (LOQ, 10LOQ, and 50LOQ) performing five replicates at each level. The recoveries 70.6~104.6% with relative standard deviations (RSDs) less than 10%. All values were consistent with the criteria ranges in the Codex guidelines (CAC/GL40, 2003) and MFDS guidelines. proposed analytical method be used as an official analytical method in the Republic of Korea.

• Cartoon and Animation Studies
• /
• s.37
• /
• pp.159-195
• /
• 2014

An animation film, , is a work that declared a perfect revival of Disney. It is considered that the success was the result of its impressive theme song and characters working influentially. The main characters let audience experience empathy as well as catharsis by building the image of women making their own future without relying on men, and among the characters, Elsa is still popular even if one year has passed since its premiere in Korea. In the narrative genre, the character's degree of completion is regarded to be so important that it can even determine the work's success or failure. Accordingly, to analyze the personality structure among the major components of character rising, this study focuses on the psychodynamics of fear and desire which determines the directions of thought or behavior. Fear is the emotion attributed not to a real threat but to an ominous assumption about the future. Because fear that is originated from the memory of any deficit or suppression distorts our sound needs, escaping from fear means facing the reality. To verify the unique psychodynamics of the characters, the researcher analyzed the hierarchy of their attitudes, psychological dispositions, and psychic functions by using 'MBTI Personality Typology'. According to the results, (1) Elsa and Anna are in a conflicting relationship in terms of psychic functions. Although they are the combination that shows the highest possibility of conflict, the two sisters overcome it basically grounded on fellowship and family love. (2) Although Hans and Kristoff, too, are against each other in terms of psychic functions, the two male characters do not interact with each other in the work. (3) Hans is a person equipped with psychic functions that can complement both Elsa and Anna the most effectively, but he abuses it and turns into the most fatal opponent to them. (4) Olaf is a type of person combining Anna's attitudes with Elsa's psychological dispositions. And according to the results of analyzing the frequency of expressing fear and desire, (1) Elsa employs overwhelming fear and Anna and others characters use desire as the major drive of their behavior. (2) Fear is the underlying deficit internalized in every character and is attributed to 'the deficit of family love', and as a result, they all share the pain of 'loneliness and isolation'. It is thought that analyzing psychodynamics will help us understand the character's growth tale, that is, the narration that they distort their desire for the first motive to avoid fear and end up being ruled by it, and also, they realize the underlying reason for the distorted desire in the process of getting rid of their own fear and reach self-healing. Lastly, regarding character rising in the animation, it is expected that the directions and analysis results of this research will be referred to as a database in creating characters and setting up relations among them.

• Journal of Animal Science and Technology
• /
• v.52 no.1
• /
• pp.43-50
• /
• 2010

The study was carried out to investigate the effects of chitosan-adding (0.5-1.5%) on nitrite-reduced (30 ppm) and sodium lactate-reduced (0-2%) sausages to avoid using excessively sodium lacte, which is substituted for sodium nitrite, The number of 24 rats for blood properties were used in this experiment and raised for 1-4 weeks. The color of sausages showed significant differences each treatment (p<0.05) and $a^*$ (redness) had the highest value in control (nitrite 100 ppm) and $b^*$ (yellowness) had the lowest value in T3 (nitrite 30 ppm + sodium lactate 0% + chitosan 1.5%). There were not significant differences in pH (5.53-5.66) and water holding capacity (66.06-69.75%) between control and two treatments (T1, nitrite 30 ppm + sodium lactate 2% + chitosan 0.5%; T2, nitrite 30 ppm +sodium lactate 1% + chitosan 1%), but T3 had significant differences in pH (5.06) and water holding capacity (62.44%), respectively. Springiness, cohesiveness, chewness and adhesiveness in texture analysis had not significant differences between control and three treatments, but hardness and gumminess had lower values in control than in three treatments. Appearance and color in sensory evaluation had higher values in control than in T1, but texture and flavor had lower values than in three treatments. Microbial counts had not significant differences in control, T2 and T3 for 1 week, for 3 weeks, it showed the lowest value in control than in three treatments. Anti-oxidant activity (TBARS) in sausages were more effective in control (p<0.05). The body weigh gain of rat were significantly increased in three treatments and also neutral fat, total cholesterol, LDL-cholesterol were significantly decreased in three treatments. However, T1 treatment had higher blood glucose content and significantly decreased in HDL-cholesterol, compared with control, but T2 and T3 treatments showed similar results in body weight gain and blood properties. So, through the addition of chitosan, it's possible to manufacture nitrite-reduced and sodium lactate-reduced sausage which is supplemented its function.

• Archives of design research
• /
• v.19 no.1 s.63
• /
• pp.253-262
• /
• 2006

Research of color has been developed and also has raised consumer desire through changing from a tool to pursue curiosity or beauty to a tool creating effects in the 20th century. People have been interested in colors as a dynamic expression of results since the color TV appeared. The meaning of colors has been recently diversified as the roles of colors became important to the emotional aspects of design. While auto colors have developed along with such changes of the times, black led the color trend during the first half of the 20th century from 1900 to 1950, a transitional period of economic growth and world war. Since then, automobile production has increased apace with the rapid economic growth throughout the world and automobiles became the most expensive item out of the goods that people use. Accordingly, increasing production induced facility investment in mass production and a technology leveling was achieved. Auto manufacturing processes are very complicated, auto makers gradually recognized that software changes such as to colors or materials was an easier way for the improvement of brand identity as opposed to hardware changes such as the mechanical or design components of the body. Color planning and development systems were segmented in various aspects. In the segmentation issue, pigment technology and painting methods are important elements that have an influence on body colors and have a higher technical correlation with colors than in other industries. In other words, the advanced mixture of pigments is creating new body colors that have not existed previously. This diversifies the painting structure and methods and so maximizes the transparency and depth of body colors. Thus, body colors that are closely related to technical factors will increase in the future and research on color preferences by region have been systemized to cope with global competition due to the expansion and change of auto export regions.

• Journal of Life Science
• /
• v.15 no.5 s.72
• /
• pp.840-846
• /
• 2005

This study was carried out to investigate the effect of electron beam irradiation and cooking temperature on physico-chemical characteristics and lipid oxidation of beef. A total of six beef carcasses ($280\∼300 kg$) that were quality grade $1^{+}$(marbling score No.7, meat color No.4, maturity No.1, texture No.1) was purchased at the commercial slaughter house. The carcasses were transported and washed using high pressure water, and pasteulized with $ 50\% $ ethyl alcohol in the laboratory. After the carcasses were deboned and trimmed, loin and round were taken out to make steak (1.5cm thickness) or ground beef respectively. Samples were wrap or vacuum packaged and irradiated with 0, 3, 4.5, 6 and 7.5 kGy using electron-beam accelerator at Samsung Heavy Industries Ltd. Co. (in Taejun). Irradiated samples were cooked with different methods(electronic pan and gas oven) and temperatures ($ 60^{\circ}C, 70^{\circ}C and 80^{\circ}C$) and used to measure fatty acid composition, TBARS, cholesterol oxide products and panel test scores. The content of saturated fatty acids increased by increasing heating temperature in oven boiling steak (OBS) and pan boiling steak (PBS), and there was no difference by electron-beam irradiation. Both irradiated and non-irradiated treatment were high as the heating temperature increased in TBARS by heating temperature in PBS (p < 0.05) and the amount of Malonaldehyde (MA), standard of fat deterioration, was increased in OBS (p < 0.05). Non-irradiated and 3, 6 kGy treatment produced about 2 fold amount of MA at $ 60^{\circ}C $ compared with $ 80^{\circ}C $. In comparison with PBS, OBS produced much amount of MA and a bit different from non-irradiated treatment but did not show no tendency. As irradiation levels and heating temperature increased, the amount of cholesterol oxides products was increased and also pan-heating method, direct heating method, significantly increased the degree of oxidation compared with oven-heating method, indirect heating method (p < 0.05).

• Korean Journal of Medicinal Crop Science
• /
• v.2 no.3
• /
• pp.181-186
• /
• 1994

Vegetative node and rhizome of Ligusticum chuanxiong Hort. were planted in spring and autumn and harvested after one and two years to determine the appropriate harvesting time which produced a high yield. Plant height, leaf number and branch number per plant were increased in order of rhizome planted in spring and harvested after two year(RST), rhizome planted in autumn and harvested after one year(RAO), vegetative node planted in autumn and harvested after one year(VNAO), and vegetative node planted in spring and harvested after one year(VNSO). Leaf area index and dry leaf weight in VNSO were highest on August 16, but dry weights of stem and rhizome was increased until harvesting time. The appropriate harvesting time was October 17, in RST, November 9 in RAO and VNAO, and November 13 in VNSO. Yield in autumn planting was more increased than that in spring planting and also that in RST was 443kg per 10a and increased by 2.8 times compared to RAO. However the yield in the rhizome planting was more increased by 17 percent than the vegetative node planting, the latter planting was inexpensive and economic for purchasing seed materials.