• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.4
• /
• pp.403-408
• /
• 2011

Purpose: To study the concentration distribution and diffusion depth in tinted lenses using the law of diffusion. Methods: The measured values taken from experiments were fitted with the theoretical fitting curve induced on the basis of Fick's second law of diffusion. Results: The fitting curves were in very good agreement with the measured values. As the results, we found the quantitative relationship between mass of dye solution diffused into the tinted lens per unit area and dyeing time, and evaluated concentration distribution of dye in tinted lens, diffusion depth, etc. Conclusions: The dyeing mechanism of tinted lenses can be well described by diffusion theory.

• Korean Journal of Crystallography
• /
• v.14 no.1
• /
• pp.35-38
• /
• 2003

A simple multistep-concentration setting in capillaries was used to control the water-evaporation rate in vapor-diffusion protein crystallization. In the method used, a variety of evaporation rate curves were obtained by using the secondary precipitant solution referred to as “regulatory solution”, which is not directly exposed to the protein solution. The curves were applied to the crystallization of lysozyme as a model protein. The results clearly showed that crystal growth is dependent on the evaporation rate. Especially, the decoupling curves in which precipitant concentration in protein solutions increases to a certain point and then decreases to the equilibrium concentration gave the best crystals.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.381-390
• /
• 2023

In this study, the mechanical performance of concrete exposed to chloride ion penetration was investigated. And a compressive stress-strain model was presented. CaCl₂ solution was added when mixing concrete to simulate long-term chloride ion penetration, and the concentration of chlorine ions was set to 0, 1, 2, and 4 % based on the weight of the binder. To investigate the compressive stress-strain curve after the peak stress of concrete, the compressive strength was measured by displacement control. When the chlorine ion concentration was 1 %, peak stress increased, but when the chlorine ion concentration was 2 % or more, peak stress decreased. In the case of peak strain, no trend according to chloride ion concentration was observed at 7 days. At 28 days, peak strain decreased as the chloride ion concentration increased. A compressive stress-strain curve model based on the Popovics model was presented using changes in peak stress and peak strain at 28 days. Microstructure analyses were performed to investigate the cause of the decrease in mechanical performance as the concentration of chlorine ions increased. It was confirmed that as the concentration of chlorine ion increased, Friedel's salt increased and portlandite decreased.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2004.05a
• /
• pp.203-206
• /
• 2004

활성탄 흡착을 통한 도장공정의 건조작업시 발생하는 VOCs 가스중에서 많은 양을 차지하는 톨루엔의 흡착실험의 결과는 아래와 같다. 활성탄을 충전한 고정흡착탑에서 톨루엔의 흡착에 있어서 파과곡선의 파과점은 흡착제의 포화특성에 좌우되며, toluene 가스의 농도, 유량이 증가할수록 감소하였다. 활성탄의 동일한 충전층에 대해 toluene 가스의 유량, 농도가 증가할수록 MTZ와 LUB도 증가함으로 흡착층의 효율이 감소하는 것으로 나타났다.

• Resources Recycling
• /
• v.27 no.4
• /
• pp.65-69
• /
• 2018

In solvent extraction, extraction isotherm represents the relation between the equilibrium concentration of metal in the aqueous and organic phase. McCabe-Thiele diagram on which extraction isotherm and operating line are constructed provides valuable information on the mass transfer operation. When the equilibrium constant of a solvent extraction reaction is known, the calculation method to obtain extraction isotherm was introduced. Kresmer equation by which the number of extraction stages can be calculated when the distribution coefficient is constant was introduced.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.6
• /
• pp.17-25
• /
• 2007

Convergent flow tracer test for 2 m (IW-1 well) and 5 m (IW-2 well) of test scale was conducted at the alluvial aquifer with high permeability and storativity. Pumping rate for convergent flow tracer test were $2,500m^3/day$, and the chloride tracer of 5 kg was instantaneously injected into IW-1 and IW-2 wells. Differences of first arrival time and peak concentration were analyzed by using the concentration breakthrough curves of chloride. Recovered chloride mass were analyzed by recovered cumulative mass curves. And, increment and decrement for chloride concentration were analyzed through chloride concentration versus recovered cumulative mass ratio graphs. Also, increment and decrement ratios of chloride concentration were estimated through linear regression analyses for increment and decrement intervals of chloride concentration. Longitudinal dispersivities were estimated by quot;Converging Radial Flow With Instantaneous Injectionquot; method using CATTI code. Longitudinal dispersivities estimated by CATTI code were 0.4152 m between pumping well and IW-1 well, and 3.2665 m between pumping well and IW-2 well. Longitudinal dispersivity was increased according to far distance from the pumping well. The longitudinal dispersivity according to distance were estimated as 0.21 between pumping well and IW-1 well, and 0.65 between pumping well and IW-2 well.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.3
• /
• pp.283-289
• /
• 1993

Effect of sulfur dioxide gas on the growth and yield of soybean growing in the On-San Industrial Complex area was evaluated using the isoquant contour lines of the sulfur dioxide in air of the area. Average concentration of sulfur dioxide monitored in the Industrial Complex from July 17 to September 17 was 0.77mg / 100cm$^2$ PbO$_2$/day. Soil pH ranged from 4.2 to 6.5. Yield losses were estimated by 5～30% due to the effect of sulfur dioxide. Liming could relieve the yield reduction to some extent. The cumulative $SO_2$ concentration, as measured by PbO$_2$ method, for two months of active vegetative growth to early ripening stage has shown a good negative correlation with soybean yield. But, pod number and 100 grain weight did not show the correlation with the concentration of sulfur dioxide. These results suggest that sulfur dioxide affect chronically and cumulatively the growth of soybean plants.

• Journal of Wetlands Research
• /
• v.19 no.3
• /
• pp.303-310
• /
• 2017

This paper is to understand the settling properties of cohesive sediments under effects of ions in turbulent flow. The experiments were conducted using a miniature annular flume(mini flume) with a free water surface. Silica was used as sediment of experiment. The suspended concentrations were measured by using a CCD-Camera. Settling of silica($SiO_2$) was allowed to occur under various shear stresses in a concentration of 7g/L. At condition of pH 4.2 and high NaCl concentration, the floc size D of silica was larger than D at condition of pH6.8 with the bed shear stress increasing. The settling velocity $W_s$ of silica was higher at condition of 10g NaCl/L than $W_s$ at condition of pH4.2. Comparison of measured concentration-time curves and concentration-time curves calculated by this study showed similar tendency in flow under effects of ions.

• Korean Journal of Materials Research
• /
• v.7 no.3
• /
• pp.244-250
• /
• 1997

본 연구에서는 에폭시/산무수물계에 경화촉진제를 첨가한 시료를 몰드(mold)내에서 등온 경화시킬 때 시료 내부의 온도변화를 측정하여 얻어진 온도-시간 곡선(temperature-time profile)을 조사하였다. 실험에 사용한 경화촉진제의 종류는 1-cyanoethy1-2-ethy1-4-methy1 imidazole(1E4MZ-CN), N,N-dimethy1 benzy1 amine(BDMA), 2,4,6-tris(dimethy1-aminomethy1)-phenol(DMP-30)이며 그들의 농도(c)는 1.0,1.5,2.0,2.5,phr그리고 경화온도(T$_{cure}$ )는 65,70,85,95$^{\circ}C$로 하였다. 경화가 진행되는 동안 시료내부의 온도는 초기에 경화온도로 상승한 후 본격적인 경화 반응이 일어나기 시작하여 온도가 급격히 상승하였다가 다시 감소하는 양상을 보였다. 온도-시간 곡선상에 나타나는 온도가 최고로 상승되는 시점(t$_{peak}$ )과 그 때의 온도(T$_{peak}$ )는 촉진제의 종류와 농도 그리고 경화온도에 의하여 영향을 받았다. 사용한 경화촉진제중에 DMP-30이 가장 짧은 t$^{peak}$ 값을 가져 가장 우수한 촉진 효과를 갖는 것으로 나타났으며, T$_{peak}$ 는 촉진제의 농도와 경화온도가 증가할수록 상승하였다. 그리고 경화촉진제의 농도와 경화온도의 변화에 따른 t$_{peak}$ 과 T$_{peak}$ 의 변화를 보면 촉진제 농도와 경화온도가 낮을 때 그 변화가 민감하여 2E4MZ-CN 이 가장 민감한 촉진제로 나타났으며 또한 T$_{peak}$ 에 영향을 주는 여러가지 요소들을 본 연구에서 얻어진 결과로부터 자세히 살펴보았다.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2002.05a
• /
• pp.17-17
• /
• 2002

국내 제지 산업에서 큰 비중을 차지하고 있는 골판지 원지는 주로 국내에서 발생되는고지를 원료로 생산되고있다. 2001년 제지 통계에 따르면 우리나라의 고지재활용율은 세계 최고 수준으로 지류 재활용 비율이 약 72%에 달하며 그중 국산 폐지사용량은 해마다 꾸준히 증가하여 2001년 62%에 이르렀다. 하지만 고지의 재활용율이 증가함에 따라 많은 기술적, 품질적 문제가야기되어 강도저하, 공정 및 품질 저하가 날로 심각해지고있는 것이 현실이다. 본 연구에서는 국내 골판지 원지의 해섬특성을 알아보고 조성이 상이한 원료 물질의 해섬특성 곡선을 조사한 후 골판지 원지의 원료로 가장 널리 사용되고 있는 KOCC의 물성개선 가능성을모색하기 위해 분급 및 기계적 처리를 적용하고 도입 효과를 살펴보았다. 다양한 조성으로 구성된 OCC 고지의 해리에 따른 해섬 현상을 살펴보기 위해 각각의 원지와 조성이 상이한 원료물질의 해섬 특성 곡선을 조사하였다. 저농도 해리기를 이용하여 농도와 revolution의 변수를 주어 해리를 실시하고 스크린을 이용하며 미해리분을 측정하여 해섬 특성 곡선을 평가하였다. 또한 가장 널리 사용되고 있는 원료인 KOCC의 분급에 의한 물성 개선 가능성을 모색하기 위해 실험실적인 모텔링에 의한 분급과 기계적인 처리를 실시하여 물성을 평가하였다. 모델링은 UKP와 KOCC 100%인 골판지 원지를 이용하였으며 압축강도, 인장강도, 파열강도를 측정하였다. 현장에서의 적용가능성을 살펴보기 위해 현장에서의 Multi fractor를 이용하여 분급된 지료를 채취하여 물리적인 처리를 가한 후 수초하여 물성을 평가하였다. 그 결과 분급 및 기계적인 처리에 의한 펄프의 특성은 단섬유의 재활용에 대한 고려가 있을 경우 물성개선을 위한 해결방법으로 활용될 수 있다고 판단되었다.