• Journal of Animal Environmental Science
• /
• v.6 no.3
• /
• pp.175-184
• /
• 2000

A lab-scale MF membrane reactor was installed to investigate the membrane permeability, characteristics of membrane fouling at each conditions, and quality of permeate (liquid livestock manure) in the separation of solid-matters using membrane. Experiment was divided three filtration type such as follows; continuous filtration, gravity filtration, and intermittent filtration. As a result of experiment, flux 1 LMH was maintained for 7days, and trans-membrane pressure(TMP) was increased gradually under 10cmHg, but it was increased immediately after 10cmHg, respectively. However, the flux was increased, the Tmax was decreased exponential more and more. During the pure-flux test, most of the fouling of membrane was reversible. At the gravity filtration, permeate could be obtained as 1.75 LMH for 3.5days without any other electronic pressure. As an investigation of membrane surface, this study could be decided that the reason of fouling at the lower flux (Run 1 and 2) was attached matters in membrane surface, but at the higher flux (Run 4-6) was concentration polarization.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.84-89
• /
• 1998

Alloy 600 및 alloy 690과 Ni-8Cr-lOFe 합금 등의 응력부식(stress corrosion cracking, SCC) 거동을 고온의 염기성 분위기에서 C-ring 시편을 사용하여 연구하였다. Alloy 600과 alloy 690을 여러 조건에서 열처리하여 etching한 후 탄화물의 분포와 입계 주변의 Cr고갈 정도 등의 미세조직을 광학현미경과 주사 전자현미경(SEM)으로 관찰하였다. 이들 재료에 대한 SCC 시험을 315$^{\circ}C$의 40% NaOH 수용액에서 일정한 부하전위(부식전위 + 200㎷)를 가하면서 수행하였으며, 동일 조건에서의 분극거동도 측정하였다. Alloy 600 MA(mill anneal) 및 TT(thermal treatment)의 SCC 저항성은 alloy 690 TT와 Ni-8Cr-10Fe SA(solution anneal)보다 낮았다. Alloy 600 TT 재료는 alloy 600 MA 및 SA 재료에 비해 SCC 저항성이 더 컸다. 고용 탄소농도는 alloy 600의 SCC 저항성에 큰 영향을 주지 못했다. 대부분의 Alloy 600은 균열전파 입계균열을 보였으나, 일부에서는 입계 및 입내 혼합양상(mixed mode cracking)을 보였다. 염기성 분위기에서 Ni기 합금의 SCC 거동을 미세조직, 분극거동의 관점에서 고찰하였다.

• Economic and Environmental Geology
• /
• v.19 no.3
• /
• pp.219-224
• /
• 1986

Spectral induced polarization (IP) responses for 20-degree dipping body are obtained by both numerical and scale models. The IP responses for the dipping body vary not only with current frequencies but also with resistivity ratios between the body and the surrounding medium. If the ion concentration related to polarizable reaction is constant, the resistivity of polarizable body depends only on the current frequency. This implies that the IP responses to the resistivity ratio are qualitatively equivalent to those to the current frequency. The numerical results with wide-range resistivity ratios, therefore, can be used as standard curves for the interpretation of spectral IP data.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.10
• /
• pp.23-28
• /
• 2010

In this paper, we investigated the polarization effects on the electrical and structural characteristics of AlGaN/GaN HEMT. Both the Al mole-fraction and the barrier thickness of AlGaN, which determine the profiles of a two-dimensional electron gas, were simulated to obtain the optimum HEMT structure affecting the polarization effect. As a results, we found that the amount of bound sheet charges was increased by 16% and the maximum drain current density ($I_D$,max) was increased by more than 37%, while AI mole fractions are changed from 0.3 to 0.4. We also observed a 37% improvement in maximum drain current density ($I_D$,max) by increasing AIGaN layer thickness from 17 to 38 nm. However when AlGaN layer thickness reached the critical thickness, DC characteristics were dramatically lowered due to 'bulk' relaxation in AlGaN layer.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.2
• /
• pp.155-160
• /
• 2008

In this study, the nitrate removal efficiency was examined under a variety of operating conditions, such as different doses of the reducing agent, different electrode types, different HRTs(hydraulic retention times), and different current densities, using the multistep electrochemical process. The nitrate removal efficiency increased and the input energy decreased when the reducing agent was used, and almost no difference was found between the electrode types in terms of their nitrate removal efficiency and current efficiency. So that the Zn reducing agent could be recovered, though, the B-type electrode was chosen(step 1: Pt-Zn; step 2: Pt-Zn; step 3: Pt-Zn; step 4: Pt-Zn). HRT experiments were carried out on constant electric current density unrelated HRTs and various electric current density related HRTs: the constant amount of electric current per unit volume. As a result, HRT and the electric current density caused concentration polarization and the lack of an applied current. That is to say,the lower the HRT, the greater the decrease in concentration polarization and in the amount of applied current per unit volume. Therefore, optimal conditions were found through the experiments that were conducted on HRT and electric current density. When a spacer was installed in the process, the nitrate removal efficiency and energy efficiency increased even more because the diffusion likewise increased.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.5
• /
• pp.231-241
• /
• 2005

Laboratory experiments were performed to examine the effects of water content and to see if permittivity had sufficient sensitivity to identify subsurface contamination. Both real and imaginary permittivities of unsaturated sand were strongly governed by the volumetric water content. Especially, a linear relationship between real permittivity and volumetric water content was derived at high frequencies (MHz ranges). Heavy metals in pore fluid result in significant increases in the effective imaginary permittivity, due to ionic conduction, but decreases in the real permittivity arises due to the decreased orientational polarization of water molecules caused by hydration of ions. Clear increase in the effective imaginary permittivity with heavy metal concentration was found to be valuable in the application of electrical methods for detecting heavy metals in the subsurface. However, because the permittivity is primarily dependent on the volumetric water content of soil, pre-evaluation on the volumetric water content is required.

• Journal of the Korean Professional Engineers Association
• /
• v.18 no.3
• /
• pp.45-54
• /
• 1985

이산화망간 건전지에 실사용되고 있는 전해액 ZnCl$_2$-$H_2O$의 조성 변화에 따른 건전지의 특성변화를 비교 검토하여, 건전지성능향상의 기본인자 및 그 변화정도를 조사코자 하였다. ZnCl$_2$ 주사용 전지계는 특히 중부하연속방전이 우수하였으며 그 이유로는 농도분극현상이 적음에 기인되며 이는 $Zn^{++}$이 본계에서는 쉽게 이동함에 있다고 간주되며 그 $Zn^{++}$ 이온의 바른 이동은 이론치보다도 다량사용하게 되는 물의 역할에 기인되고 방전에 직접 필요한 수분량과, 기타의 목적 즉 반응 침전물의 재용해, ion carrier 등으로서 이용되는 수분량은, MnO$_2$와의 비율 및 방전 부하크기에 따라 다르다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.10a
• /
• pp.111-113
• /
• 1997

1. 서론 : "Engaged type"의 2축 RDM은 housing의 부피에 대한 막면적을 극대화시키고 회전방향을 엇갈리게 함으로서 유체의 겉보기속도를 증가시키고 막표면에서 난류와 2차흐름을(secondary flow)를 형성시켜 농도분극층이 감소하여 막오염을 최소화할 수 있다. 본 연구에서는 2축 RDM으로 실제 열간 압연유 폐수를 적용하여 농축실험을 하였으며 투과 특성과 농축수의 열간 압연유 입자 분포의 변화를 조사하였다.변화를 조사하였다.

• Membrane Journal
• /
• v.6 no.1
• /
• pp.1-9
• /
• 1996

본 논문에서는 막오염을 일으키는 현상과 원인들을 나름대로 규명하기 위해 고찰 하였고, 이러한 규명은 막오염층 성장모델과 막오염층의 성장요인이 되는 흡착과 대류속도 등으로 나누어서 고찰하였다. 이러한 문제의 근본적인 이해는 막오염의 기초적 이론 지식이 이해되었을 때 막공정의 개발이 향상될 수 있으며 막오염은 농도 분극현상서부터 흡착, 막세공 막힘에 이르기까지 일련의 과정들이 분리돼서 이해될 수 없는 서로의 긴밀하 관계가 유지되므로 종합적인 기초 지식의 열거가 필오하다.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.1
• /
• pp.29-37
• /
• 1999

In this study, we have prepared PLT thin films having various La concentrations by using sol-gel method and studied on the effect of La concentration on the electrical properties of PLT thin films. As the La concentration increases from 5mol% to 28mol%, the dielectric constant at 10kHz increases from 428 to 761, while the loss tangent decreases from 0.063 to 0.024. Also, the leakage current density at 150kV/cm has a tendency to decrease from 6.96${\mu}A/cm^2$ to 0.79${\mu}A/cm^2$. In the result of hysteresis loops of PLT thin films, the remanent polariation and the coercive field decrease from 9.55${\mu}C/cm^2$ to 1.10${\mu}C/cm^2$ and from 46.4kV/cm to 13.7kV/cm, respectively. With the result of the fatigue test on the PLT thin films, we have found that the fatigue properties are improved remarkably as the La concentration increases from 5 mol% to 28mol%. In particular, the PLT28) has paraelectric phase and its charge storage clensity and leakage current density at 5V are 134fC/${\mu}cm^2$ and 1.01${\mu}A/cm^2$, respectively. The remanent polarization and coercive field of the PLT(10) film are 6.96${\mu}C/cm^2$ and 40.2kV/cm, respectively. After applying of $10^9$ square pulses with ${\pm}5V$, the remanent polarilzation of the PLT(10) film decreases about 20% from the initial state. In the results, we conclude that the 10mol% and the 28mol% La doped PLT thin films are very suitable for the capacitor dielectrics of new generation of DRAM and NVFRAM respecitively.