• Title/Summary/Keyword: 노출도

Search Result 10,814, Processing Time 0.052 seconds

A Study on the Defects of Exposed Concrete Finishing Work Using AHP (AHP기법을 활용한 노출콘크리트 마감공법 하자 도출)

  • Choi, Seongmi;Song, Yeongwoong;Lee, Kiseok;Yoo, Seonghoon;Choi, Yoonki
    • Korean Journal of Construction Engineering and Management
    • /
    • v.20 no.4
    • /
    • pp.46-55
    • /
    • 2019
  • The exposed concrete has been widely used in building construction. Therefore, many researches are presented to secure a proper construction quality of exposed concrete. Low quality and management absence, however, still remained in construction fields. Thus, many studies have been conducted to improve the quality, but defects still occur in the exposed concrete finishing work. In this study, the causes of defects were analyzed by process in order to prevent the generation of defects and to enhance the need for integrated management to secure quality. In addition, a case study and AHP analysis have derived the importance of defects occurring in the exposed concrete finishing work. The study concluded that the occurrence of the exposed concrete finishing work needs to be managed throughout the process, not the management limited by one process, according to the causes of the existing defects, and integrated management is required to prevent defects and improve quality of exposed concrete finishing work.

Aging Characteristics of Carbon Fiber/Epoxy Composite Ring Specimen (탄소섬유/에폭시 복합재 링 시편의 노화 특성 평가)

  • Yoon, Sung-Ho;Oh, Jin-Oh
    • Composites Research
    • /
    • v.22 no.6
    • /
    • pp.39-44
    • /
    • 2009
  • The effect of exposure times on the aging characteristics of carbon fiber/epoxy composite ring specimen was evaluated using an accelerating aging tester. Combined exposure conditions, such as temperature, moisture, and ultraviolet, were applied up to 3000 hours. Tensile properties and flexural properties including the effect of curvature were evaluated on the specimens subject to various exposure times through a material testing system. Their aging surfaces were observed through a scanning electron microscope. According to the results, tensile modulus was little affected by the exposure times. However, tensile strength, at the early stage of the exposure times, increased due to physical aging and curing reaction, but tensile strength slightly decreased due to degradation as the exposure times increased. The flexural modulus and flexural strength increased at the early stage of the exposure times, but slightly decreased as the exposure times increased. Aging surfaces of the specimens examined using the scanning electron microscope revealed a different morphology in various exposure times and provided useful information for identifying the degradation in mechanical properties of the composite subject to various exposure times.

Retinex-based Virtually Exposed Image Fusion for Single Image HDR (Retinex 기반의 가상 노출 이미지 생성을 통한 HDR 영상 생성 방법)

  • Park, Jae Sung;Kil, Taeho;Hwang, Insung;Cho, Nam Ik
    • Proceedings of the Korean Society of Broadcast Engineers Conference
    • /
    • 2016.06a
    • /
    • pp.242-245
    • /
    • 2016
  • 본 논문에서는 단일 노출 영상으로부터 다수의 가상 노출 영상을 생성하고, 그 영상을 한 장의 HDR 영상으로 합성하여 SDR 디스플레이 시스템에 개선된 화질의 영상을 보여주도록 하는 방법을 제안한다. 이 방법에서는 주어진 단일 노출 영상을 Retinex 이론을 적용하여 조명 성분과 반사 성분으로 분리하고, 새로운 노출 조절 알고리즘을 제안하여 다수의 가상 조명 성분과 원본 이미지의 반사 성분을 생성하며 이들을 이용하여 다수의 가상 노출 영상을 생성한다. 생성된 다수의 가상 노출 영상은 가중치 합성 함수에 의해서 암부의 세부 표현력이 개선되고 명암비가 높아져 SDR display 에서도 우수한 화질의 HDR 영상으로 변환된다. 기존에 제안된 알고리즘과 비교 실험을 통해, 본 논문에서 제안된 HDR 영상 합성 기법의 성능을 증명한다.

  • PDF

An Experimental Study and Field Application of Exposed Concrete (노출 콘크리트 실험 및 현장 적용)

  • 신성우;안종문
    • Magazine of the Korea Concrete Institute
    • /
    • v.13 no.4
    • /
    • pp.46-53
    • /
    • 2001
  • 노출 콘크리트는 별도의 마감없이 콘크리트 면이 외부에 노출되는 특성상 최적의 품질을 가지는 콘크리트를 제조.시공하여야하는데 이러한 노출 콘크리트는 제조 및 시공 방안이 까다로울 뿐만 아니라 그 내용이 각국 소속 회사의 기술 보유 차원에서 보호되고 있어 기술 도입이 어려운 점 이외에도 시멘트, 골재 등 국산 재료 사용과 시공 방안에 근거한 국내 실정에 적합한 제조 시공 기술과 이를 위한 시방서의 제작이 필요한 시점에 있다. 또한 국내의 경우에도 2002년 월드컵 부산, 광주(<사진 1>), 서귀포 경기장(<사진 2>)등등의 경기장 건설에 노출 콘크리트를 사용하여 콘크리트 마감을 실시하고 있는 등 노출 콘크리트에 대한 요구 및 사용이 증가하고 있는 실정이다. 따라서 본고에서는 경부고속철도 천안역사나 제주월드컵경기장, 그리고 부산 아시안경기 주경기장에 노출 콘크리트를 적용하기 위한 실험 및 현장 적용 사례를 소개한다.

작업환경을 위한 TLV의 근거 - PERFLUOROBUTYL ETHYLENE(1)

  • Kim, Chi-Nyeon
    • 월간산업보건
    • /
    • s.276
    • /
    • pp.27-31
    • /
    • 2011
  • Perfluorobutyl ethylene(PFBE)은 유기용제 혼합물에 주로 사용되는 산업화학물질로 동물에게 경구, 피부, 눈 그리고 흡입 노출되는 경우 급성 독성이 매우 낮다. Perfluorobutyl ethylene을 흰쥐에게 하루 6시간, 일주일에 5일씩 2주간을 0, 500 ppm, 5,000 ppm, 50,000 ppm을 흡입 노출시킨 연구에서 최대무작용량(no-observed-adverse effect level, NOAEL)으로 500 ppm이 결정되었으며 5,000 pm에서는 단핵 백혈구가 약간 증가하였다. 50,000 ppm에서도 병리학적 변화는 없었다. 그 후의 흡입연구는 하루 6시간, 28일간 연속적으로 흰쥐 암수에게 400 ppm, 2,000 pm, 10,000 ppm의 농도로 perfluorobutyl ethylene 증기를 노출시켰다. 최종 노출 후 흰쥐를 희생시켜 관찰한 결과, 체내 기관 무게변화를 포함한 어떠한 변화도 관찰되지 않았다. 그러나 10,000 ppm에 노출된 수컷 흰쥐 5마리 중 4마리는 작은 다중간세포질 액포가 발견되었다. Perfluorobutyl ethylene 증기 10,000 ppm에 노출된 수컷 흰쥐는 부분적으로 평균 혈액응고 촉진 시간이 감소하였다. 이 연구에서는 최대무작용량을 2,000 ppm으로 결정하였다. Perfluorobutyl ethylene의 TLV-TWA 100 ppm은 노출 후 악영향을 최소화하는데 충분한 농도이며 "피부흡수(Skin)", "감작제(SEN)" 그리고 발암성에 대한 경고주석을 설정하기에는 유용한 연구가 충분하지 않다.

  • PDF

Adaptive Over-Exposure Method for Improving Signal-to-Noise Ratio on Digital Cameras (디지털 카메라에서 신호대 잡음비(SNR)를 높이기 위한 적응형 과다 노출 방법)

  • Lee Wonjae;Kim Hak-Young
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2005.07b
    • /
    • pp.829-831
    • /
    • 2005
  • 디지털 카메라 이미지의 화질을 저하시키는 주요 요인 중 하나는 노이즈이다. 디지털 카메라에 사용되는 CCD/CMOS 센서의 특성상, 노출이 증가할수록 신호대 잡음비(SNR)가 증가한다. 따라서 디지털 카메라에서 SNR이 높은 이미지를 얻기 위해서는 되도록 많은 노출을 주어야 한다. 하지만 너무 과다한 노출을 주게 되면 highlight clipping이 일어나기 때문에, RGB 모든 채널에서 clipping이 일어나지 않는 범위 안에서 노출을 주어야 한다. 그리고 CCD/CMOS RAW 데이터에 대해 카메라의 이미지 프로세싱 과정에서 디지털 노출 보정을 해주면 사람이 보기에 적절한 노출을 가지면서도 SNR이 높은 고화질의 이미지를 얻을 수 있다.

  • PDF

The Effect of working Noise Exposure and Military Background on the Hearing Threshold (특수병과의 과거 군 소음 노출이 소음 노출 작업자의 청력에 미치는 영향)

  • Chung, Ho-Keun;Kim, Kyoo-Sang
    • Journal of Preventive Medicine and Public Health
    • /
    • v.36 no.2
    • /
    • pp.137-146
    • /
    • 2003
  • Objectives : Impaired hearing is a prevalent occupational hazard, not only in industry, but also in the armed forces. In military life, noise has unusual characteristics, and constitutes a serious hazard to hearing. The aim of this study was to analyze the hearing threshold data in order to compare the hearing loss among shipyard workers, representing different workers, and a military service background. Methods : A cross-sectional audiological survey, combined with a questionnaire study, was conducted on a stratified random sample of 440 shipyard workers, with long-term exposure to noise. The employees were divided into four groups, according to their working and military service backgrounds, in relation to their exposure to noise. Results : As expected, the working and military noise exposure group (Group I) had significantly poorer hearing than the other groups. The high frequencies (2-8 kHz) showed the greatest difference in terms of poorer fearing in both ears. The prevalence of noise-induced hearing loss (NIHL) was highest in Group I. A logistic regression analysis was applied to determine the dependence of the NIHL in relation to age, smoking, drinking, working duration, ear protection, past history of ear diseases, and working and military sonics backgrounds, on the noise exposure The important factors found to be related to the NIHL, in relation to noise exposure were: age, work duration, and working and military service backgrounds. The adjusted odds ratio estimates for NIML in the right ear were 4.5 times greater (95% CI 1.7-11.6) for the military noise exposed group, and 7.9 times greater (95% CI 2.0-31.3) for the working noise exposed group than in the controls. The hearing thresholds at the pure-tone average and 4 kHz were significantly increased with age and work duration with both the working and military service backgrounds. Conclusions : From these results, specific preventive programs were planned, which should be assessed by epidemiological surveillance of the military noise exposed population.

Visual Recognition Delayed in Time by Electromagnetic Wave (전자파에 의해 시간 지연되는 시각인식)

  • Yun, Jae-Hyun;Park, Hyung-Jun
    • Proceedings of the KIEE Conference
    • /
    • 2005.07d
    • /
    • pp.2947-2949
    • /
    • 2005
  • 본 연구의 목적은 전자파에 노출되었을 경우와 노출되지 않았을 경우의 시각 자극(광자극)에 의해 발생하는 뇌파를 분석하여, 전자파가 광자극 전과 광자극 후의 시각인식에 미치는 영향을 규명하는 것이다. 암순응 시킨 피험자에게 신호의 주파수가 약 900MHz이고, 세기가 약 13dBm인 전자파에 노출되었을 경우와 노출되지 않았을 경우로 구분하여, 광인식시에 발생하는 뇌파를 계측, 분석하였다. 본 연구에서 제안한 해석방법을 이용하여 뇌파를 분석한 결과, 인체가 전자파에 노출되었을 때 시각인식에 기인하여 나타나는 뇌파 변화의 현상 중 $\alpha$-blocking 시점이 지연되는 것을 확인하였다.

  • PDF

Hardware Implementation of Automatic Exposure Algorithm for Mobile Camera (모바일 카메라를 위한 자동노출 알고리즘의 하드웨어 구현)

  • Mo, Sung-Wook;Park, Hyun-Sang
    • Proceedings of the KAIS Fall Conference
    • /
    • 2009.05a
    • /
    • pp.303-306
    • /
    • 2009
  • 자동노출(auto exposure)는 피사체나 광원의 밝기에 변화에 대응하여 카메라로부터 취득된 영상의 노출치를 일정하게 유지시켜주는 기능을 나타내며, 모바일 카메라의 핵심 구성 요소 중의 하나이다. 일반적으로 자동노출 알고리즘은 소프트웨어로 구현되기 때문에, 모바일 카메라 시스템에는 CPU와 소프트웨어를 저장하기 위한 ROM을 내장하는 형태를 가지는데, 이는 유연성을 확보하는 대신 CPU와 메모리라는 비용증가로 이어지게 된다. 본 논문에서는 모바일 카메라를 위하여 임의의 프레임 레이트 가변기능과 아날로그 게인 조정이 가능한 자동 노출 알고리즘을 제안하고, 이에 대한 하드웨어 구조를 제안한다.

  • PDF

작업환경을 위한 TLV의 근거 - PERCHLOROMETHYL MERCAPTAN(l)

  • Kim, Chi-Nyeon
    • 월간산업보건
    • /
    • s.273
    • /
    • pp.40-43
    • /
    • 2011
  • Perchloromethyl mercaptan에 대한 직업적 노출기준으로 TLV-TWA 0.1 ppm(0.76 mg/$m^3$)으로 권고한다. TLV-TWA 0.1 ppm(0.76 mg/$m^3$) 은 눈과 코의 자극 그리고 불쾌한 냄새로 인한 불편함의 가능성을 최소화하는 수준이다. Perchloromethyl mercaptan에 대한 동물 노출 실험연구와 근로자들의 노출연구 자료는 매우 제한적이다. 사고로 확인되지 않은 농도에 근로자들이 노출된 경우, 발견된 증상과 징후는 눈, 목, 가슴에 심한 자극과 기침, 눈물, 호흡곤란, 메스꺼움, 구토, 빈맥, 청색증, 경련 그리고 폐부종에 의한 사망이다. Perchloromethyl mercaptan을 활용하는 생산설비에서 TLV-TWA 0.1 ppm 이하 농도의 증기에 노출되었을 때 질병을 유발하였다는 보고는 없었다. 피부흡수, 발암성 그리고 TLV-STEL을 권고하기 위한 유용한 자료는 충분하지 않다.

  • PDF