• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2004.05a
• /
• pp.72-84
• /
• 2004

반도체 집적도가 높아지고 웨이퍼가 대구경화 됨에 따라 새로운 이송 장비의 개발이 필요하게 되었다. 본 연구에서는 이송장비의 새로운 개념인 공기부상 방식의 낱장이송 시스템을 설계하고 부상 노즐의 크기에 따른 부상 높이를 평가하였으며 그 결과 동일한 부상용 유량을 사용할 경우 0.5 mm 보다 0.8 mm 노즐이 부상 높이가 더 높고 에너지 절약적인 측면에서 유리함을 밝혔다. 또한 웨이퍼 이송용 추진 노즐의 배치에 따른 웨이퍼 이송 속도의 변화를 측정하여 동일 유량에서 추진속도가 훨씬 증가된 형상인 Type B(노즐 집중형)를 결정할 수 있었으며, 제조장비와 이송장비를 연결시켜주는 인터페이스에서의 웨이퍼 안정성을 평가한 결과 평균 16초 이내에 매우 안정된 공기부상 방식의 웨이퍼 낱장이송 시스템을 구현할 수 있었다.

• Journal of the Korean Society of Radiology
• /
• v.14 no.7
• /
• pp.891-898
• /
• 2020

As the problem of shields made of lead has recently emerged, research on replacement shields is essential, and studies on the manufacture of diagnostic X-ray shields with 3D printers are also being actively conducted. Recently, with the development of metal mixed filaments, it has become possible to manufacture shielding materials easily, but studies on the nozzle size and output setting of 3D printers are insufficient. Therefore, this study aims to compare and analyze the results through a shielding rate experiment using a brass filament and a 3D printer, outputting the shield according to the nozzle size and layer height, and using a diagnostic radiation generator. The nozzle size was changed to 0.4, 0.8 mm, layer height 0.1, 0.2, 0.3, 0.4 mm, and output. The shielding rate test was fixed at 40 mAs, and the shielding rate was analyzed by experimenting with 60, 80, and 100 kVp, respectively. As a result of the analysis, it was analyzed that the printing time could be reduced to 1/10 according to the nozzle size and the layer height, and the shielding rate could be increased by 1% or more.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.22 no.4
• /
• pp.201-213
• /
• 1989

This study is just to be carried out to grasp the efficiency of jet stream excavating for the ground. Changing the dynamic pressure, nozzle diameter, distance off the ground, we measured the impulse, the excavated depth, the excavated width. According as each dynamic pressure increases from 100 to $500gf/cm^2$, the impulse of the jet stream increases from 43 to 114gf, from 52 to 227gf, from 114 to 506gf, from 137 to 768gf, in 4, 6, 8, 10mm nozzles respectively, but it makes no difference in the value of distance within 50cm off ground. The excavated depth increases at the invariable rate in accordance with nozzle diameter, dynamic pressure, nozzle distance. We obtain the equations relevant to the ground I, II as follows: $$L_I=[0.01(H/r-100) -0.43\cdot\iota+11.78]{\cdot}D/4$$ $$L_{II}=[0.03(H/r-100) -0.34\cdot\iota+6.39]{\cdot}D/4$$ where, $L_I,\;L_{II}$ are respectively the excavated depths of the ground I, II, cm; H is the dynamic pressure, $gf/cm^2\;:\;\iota$ is the distance off the ground, cm; D is Nozzle diameter, mm; r is the specific weight, $1gf/cm^2$.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.320-324
• /
• 2017

Effect of elliptical orifice on the spray characteristics of liquid jet ejecting into subsonic crossflows were experimentally studied. Circular/elliptical plain-orifice injectors, which had different ratios of the orifice length to diameter and major axis to minor axis, were used for transverse injection. Compared with the previous research, breakup lengths of elliptical nozzles are shorter than circular nozzles at all experimental condition. Cavitation/hydraulic flip are considered as a reduction in the breakup length at all circular/elliptical nozzle. In the case of liquid column trajectories, major axis which was placed to the crossflows, increases the frontal area of the liquid column exposed to the crossflows. Hence, the aerodynamic force exerted on the jet is increased and the penetration depth is reduced.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2010.04a
• /
• pp.141-146
• /
• 2010

특수선(FPSO, Drillship)의 거주구역이나, 대형 여객선(크루즈선) 공간의 70% 이상을 차지하는 수용시설(accommodation) 즉, 객실, 라운지, 공공장소, 창고 등은 24시간 사람이 상주하는 구역임으로 화재로부터 완벽하게 보호되어야 한다. 이를 위해 국제해사기구(IMO)에서는 SOLAS II-2 Reg. 10.6과 FSS code Ch. 8에 적합한 미분무수 소화설비를 설치할 것을 강제화하고 있다. 이러한 미분무수 소화설비는 미분무수 노즐, 압력용기, 섹션밸브, 펌프유닛 등으로 구성되는데 특히 핵심부품인 미분무수 노즐은 IMO Res. MSC 265(84)에 따라 노즐성능시험 및 화재진압성능시험을 통해 형식승인을 득해야 한다. 본 연구에서 이러한 기준에 만족하는 미분무수 노즐을 개발하고자 선실 및 복도에 대한 화재시험에 이어 공공장소 화재시험을 수행하였으며, 두 가지 천장 높이에 대한 화재진압성능을 평가하였다.

• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.303-308
• /
• 2013

A remote controlled sprayer has designed, manufactured and experimented to spray well on pear trees with pesticides. This study was executed to automate pest management of pear trees. Types of spray nozzle, which was used on the system, were analyzed experimentally to find an optimal spray equipment configuration with several nozzles. Attributions of ultrasonic sensors were analyzed to adjust spraying distance of an unmanned sprayer system. This paper investigated shapes of pear trees and cultivating environment of pear orchard. In order to select optimal spray environment, liquid distribution was measured while angle of nozzle was changed. Additionally, liquid distribution by distance and sprayed liquid capacity by side distance were measured. According to information of shapes of pear trees and cultivating environment of pear orchard, sprayer frames of an unmanned sprayer system were manufactured and sprayer frames were suitable for interval of pear trees. The sprayer system could adjust width of sprayer frames to 2.5 m and height of sprayer frames to 1.7 m. Optimal angle of nozzle, and optimal distance between objects and nozzle were $15^{\circ}$ and 0.8 m. When side distance was placed from 1.2 m to 1.8 m, sprayed capacity reached to the highest amount.

• Journal of Bio-Environment Control
• /
• v.8 no.4
• /
• pp.223-231
• /
• 1999

The one of basic functional conditions of suspended overhead sprayer, which is openly made use of irrigating on bedding plants in greenhouse, is to be kept the growing uniformity of bedding plants by making uniformly the spraying irrigation depending on the distribution of sprayed water. This study was performed to find out the optimum position of sector formed injection nozzle which is placed from the top of plant 0 the tip of the nozzle to keep spraying uniformity. The test of spraying distribution using a overhead sprayer, which was installed in a row of sector formed injection nozzles, was performed The measuring factor to represent spraying distribution was the water weight filled in each cup when the overhead sprayer was moving across the upside of the cups which were placed directly under the nozzles on keeping the distance from nozzle tip. The test results were as following , The standard mr of weights of each cup filled with spraying water was lower values at Position far from more than 60cm under nozzle tip. The driving speed variation of sprayer was not effected on spraying uniformity but the spraying water weight was inversely proportioned to the speed. To make best spraying uniformity, it was represented that the tip of the nozzle is positioned to keep the distance which the top of plants is placed at the second cross point of each injection sector of nozzles.

• Fire Science and Engineering
• /
• v.23 no.2
• /
• pp.78-84
• /
• 2009

We carried out fire extinguishing experiments with three kinds of water mist nozzle system. Fire extinguishing experiment according to installed nozzle height and fuel pan location was done. And fire extinguishing performance was compared with plain water and foam agent mixed solution. Water mist nozzle height was varied with 4m, 3.5m and 3m and position of fuel fan was varied 0.5m and 1m from the center of water mist nozzle. Foam agent that used in this experiment is 3% type of AFFF (Aqueous Film Forming Foam) solution. Experimental result showed the door opening effect was little. Fire extinguishing performance of foam agent mixture water mist was better than the plain water mist only.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.609-612
• /
• 2012

본 연구는 산학연구로 위탁된 가스레인지 신규 개발에 필요한 설계 인자를 선행적으로 파악할 목적으로 시판 중인 가정용 가스레인지를 선정하여 성능에 미치는 주요 설계 인자들의 영향을 실험적인 방법으로 파악하였다. 수행된 연구는 가스레인지에 공급되는 연료 공급압력, 연료 노즐의 분사 위치와 적재 높이에 따른 열효율과 연소 배기가스량을 측정하여 이들 변수들이 종합 성능에 미치는 영향에 대해서 주로 조사되었다. 본 연구를 통하여 성능에 영향을 주는 최적화된 적재 높이와 연료 노즐 분사위치가 존재함을 확인하였으며, 이러한 결과는 업체의 신규 개발에 유익한 정보로 활용될 예정이다.

• Agrochemical news magazine
• /
• v.25 no.4 s.197
• /
• pp.10-13
• /
• 2004