• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.462-465
• /
• 2014

It is well known that tire/road factors have a large influence on overall tire performance. In this paper, the basic study on the effects of tire/road factors on the pass-by noise performance of tire labeling has been carried out through experimental tests. The tire pass-by noise is affected by road characteristic factors, especially greatly influenced by road friction coefficient, and the next dominant factor is road chipping size. For several authorized pass-by noise test tracks, the pass-by noise correlation test has been done to know the test site effect, which results in 2~3dB(A) variation of pass-by noise level. Finally, it is shown that the winter tire is differently influenced by the pass-by noise test track characteristics, as compared to all-season tire and summer tire.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.581-586
• /
• 2014

In general vibration test considers both harmonic vibration and random vibration, When developing the vehicle component. But the effect of harmonic vibration is larger in the parts around the vehicle engine, sole testing the harmonic vibration is considered. In this study, the fatigue damage of the linear system fixed around the engine is analyzed when the effect of random vibration is higher, harsher than the normal road surface condition. In condition the vehicle speed and the engine RPM are similar, the higher the harshness of the road surface condition is, the larger the fatigue damage level is. Therefore both random vibration and harmonic vibration must be considered in vibration test of components around the engine. Proposing the sine on random(SOR) vibration test that can exam considering both of vibrations, harmonic and random.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.19-28
• /
• 2012

A measuring technique for tire-pavement interaction noise that uses a proposed noble close proximity(NCPX) method, which has been proofed in terms of the reliability and consistency of interaction noise measurement through several researches, equipped with surface microphones has been adopted in order to perform bridge deck pavement noise evaluations on four different pavement surfaces. Through field testing measurement of bridge deck pavement in Seoul inner ring road, the appropriate noise-measuring procedures have been used for evaluating the noise characteristics of four different surfaces. Measuring results show that tire-pavement noise levels vary depending on the surface types and vehicle speeds. Furthermore, the different characteristics of tire-pavement interaction noise can be found before and after the new surface construction of bridge deck pavements in terms of the 1/3 octave band analysis of vehicle speed.

• Journal of KSNVE
• /
• v.2 no.3
• /
• pp.168-172
• /
• 1992

최근 자동차 분야에 있어서 많은 변화가 급속히 일어나고 있다. 70년대의 오일쇼크 이후 전륜구동 승용차의 보급이 급속히 확산되고, 연비 경쟁이 늘어났으며 소형. 경량화의 요구는 점차 증가되고 있다. 이후 80년대 들어 전자기술이 접목되면서 혁명적이라 할 수 있는 변화가 일어났고, 그 변화의 추세는 급속히 가속화되고 있다. 자동차의 전자화는 초기에는 공해 및 연비 개선 차원에서 시작됐으나, 이후 안전성 및 주행성능 향상을 겨냥했고, 이제는 인간감성까지 고려한 최적제어 측면에서 활발한 연구가 진행되고 있다. 이러한 변화는 소음. 진동분야에도 일어나, 차량이 점차 고성능. 경량화됨 에 따라 더욱 최적화된 구조물 설계를 요구하고 있고, 더 나아가 전자화를 도입 각종 노면 및 주행상태에 따라 최적의 승차감을 제공하는 전자제어 현가 시스템(E.C.S.)이 상품화되었고, 소리를 발생시켜 소음을 제거시키는 능동소음제어 시스템(ANC)의 실용화 단계를 앞두고 있다. 이러한 시점에 국내 자동차의 소음. 진동분야에 종사하는 많은 사람들에게, 실제 우리 국산화가 국내. 외적으로 소음. 진동부분이 어떻게 평가되고 있는지, 또 자동차 대중화 시대를 맞이한 국내의 많은 소비자들의 불만은 어느 정도인지를 인식시켜 각자의 사명감을 고양하고, 참고적으로 일본의 최근 자동차 분야의 소음. 진동 연구 동향을 소개하여 자동차 소음. 진동 대책 연구에 도움이 되고자 한다.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.2
• /
• pp.80-91
• /
• 1995

A theoretical models has been prepared which describes the noise generated by tire/road interaction for the tire structure-borne sound analysis. The model begin with a set of thin shell equations describing the motion of the belt of a radial ply tire, as drived by Bohm('mechanisms of the belted tire', Igeniur-Archiv, XXXV, 1966). Structural quantities required for these equations are derived from material properties of the tire. The rolling shape of a tire is computed from the steady-state limit of these equations. Vibrational response of the tire is treated by the full dependent shell equations. The force input at the tire/road interface is calculated on the basis of tread geometry and distribution of contact patch pressure. Radiation of noise is calculated by a simpson integral. Using the programs, the effect on noise of various tire design variations is computed and discussed. Trends which lead to quiet tire design are identified.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.758-761
• /
• 2005

본 연구에서는 고속도로 발생 소음특성을 측정하여 방음벽 설계 인자를 도출하기 위함이다. 이를 위해 인터체인지 및 영업소 인접부를 포함한 총 20개소를 선정하여 소음측정을 수행하였으며, 소음원의 주파수특성 및 일일 변동특성, 노면 종류에 따른 소음발생특성, 영업소 및 인터체인지 부근에서의 소음특성을 분석하여 방음벽 설계 인자를 도출하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.238-239
• /
• 2012

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.5
• /
• pp.327-333
• /
• 2003

Several tests are performed to evaluate road booming noise. Baseline test delivers the information of road noise characteristics. Coupling effect between structure and acoustics is obtained from the mode shapes and the natural frequencies by the modal test. Equivalent stiffness at joint areas between chassis and car-body system can be determined by the input point inertance test. Noise sensitivity of body mounting point of a chassis part can be obtained from the noise transfer function test with input point inertance test. Operational deflection shape makes us analyze the actual vibration modes of the chassis system under actual leading and find noise sources very easily. Finally, the transfer path analysis is used to Identify noise Paths through the chassis system. The objectives and the procedures of the tests are described in this Paper Also, the guideline for efficient road noise evaluation test can be found.

• Journal of the korean Society of Automotive Engineers
• /
• v.9 no.2
• /
• pp.17-27
• /
• 1987

최근 자동차기술의 발달로 인한 차량의 경량화, 고급화 추세는 더욱 개선된 승차감을 요구하고 있다. 승차감에 영향을 미치는 주요인으로서는 엔진의 진동과 소음, 변속장치, 구동축 등의 구동 계통의 진동 및 소음, 그리고 노면으로부터의 진동, 외부 공기의 흐름에 의한 소음 등 여러가지가 있다. 엔진지지계는 이중 엔진의 진동 및 소음을 절연하는 기능을 맡고 있고 동시에 엔진하중의 지지, 변위제한, 충격흡수 등의 기능도 가지고 있다. 실제에 있어서 엔진지지계는 진동 및 소음 절연의 기능 외에 다른 기능도 갖고 있으나 이중 가장 어렵고 해석이 곤란한 것은 결국 진동절 연성능이라고 할 수 있다. 그러나 여러 가지 제약조건이 있으므로 최적의 진동절연특성의 실 현이 항상 가능한 것은 아니고 방진고무의 특성치난 지지각도 등의 어느 범위안에서만 선택이 가능하므로 실제 설계에 있어서는 적용상의 특정조건을 만족시키는 초기설계치를 정하여 그때의 진동절연특성을 평가하고 기준이하일때는 설계치를 재조정하여 다시 평가하는 접근방식이 실질 적이다. 따라서 이 설계과정에 필요한 엔진지지계의 진동절연특성해석 및 평가용 컴퓨터 프로 그램을 개발하였으며 그 해석치와 실험결과를 비교하여 타당성을 입증하였다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.8
• /
• pp.581-588
• /
• 2002

Precise highway traffic noise simulation and reduction require the accurate data for sound power levels omitted by vehicles, varied to road surface, traffic speed, vehicle types and makers, different from countries to countries. In this study, we have elaboratively measured Korea highway traffic noise and parameters affecting noise levels at the nearside carriageway edge. From numerical simulation using the measured results for highway traffic noise, we propose not only two correction factors to enhance the accuracy of Korea highway traffic sound power estimation using ASJ Model-1998 but also its typical power spectrum according to road surface type. The measured and predicted highway traffic noise levels using the proposed sound power show little difference within 1 dB.