• Journal of Korean Society of Transportation
• /
• v.15 no.2
• /
• pp.25-34
• /
• 1997

본 연구에서는 아스팔트 포장과 콘크리트 포장의 습윤시 교통사고 가능성을 비교하 였다. 다양한 노후도를 가진 두 포장재료에 대해 마찰력 측정장비(BPT, Britsh Pendulum Tester)로 건조 및 습윤상태에서 노면마찰력을 측정하였으며, 측정결과와 두 포장재료에 대 한 실제 교통사고율을 비교하였다. 본 연구의 결과를 요약하면 다음과 같다. (1) 노면 습윤 에 따른 마찰력 저하정도는 아스팔트 포장이 콘크리트 포장보다 컸다. (2) 노면 습윤에 따른 실제 교통사고율도 아스팔트 포장에서 훨씬 큰 것으로 나타나 (1)의 결론과 일관된 결과를 보여주었다. (3) 노면마찰력은 건조상태에서는 노면마모 정도에 크게 영향을 받지 않으나 일 단 습윤상태가 되면 노면마모가 심할수록 마찰력 저하폭이 큰 것으로 나타났다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1611-1617
• /
• 2013

Information about trafficability or the condition of road with regard to its being traveled over by vehicles is one of the most critical factors for roadway operation in winter. Specifically, when traveling on snowy or icy surfaces, the traction force varies per vehicle type including tire types, geometric characteristics of roads, and conditions of road surfaces. In general, front-wheel drive or four-wheel drive vehicles have better traction performance on snowy or icy surface than rear-wheel drive vehicles, and the latter type vehicle causes more serious traffic congestion when there is unexpected snowfall. Thus, traffic information regarding trafficability with respect to vehicle types, geometric characteristics of roadway sections, and roadway surface conditions can provide a foundation to make a decision whether to use the associated roadway sections for roadway operators as well as users. Based on the preceding premise, the objective of this study is to present a methodology for developing a trafficability index with respect to vehicle types, geometric characteristics of roadway sections, and roadway surface conditions.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.1
• /
• pp.78-85
• /
• 2013

This paper presents the sliding mode control methods for anti-lock brake system (ABS) with the friction force observer. Using a simplified quarter car model, the sliding mode controller for ABS is designed to track the desired wheel slip ratio. Here, new method to find the desired wheel slip ratio which produces the maximum friction force between road and tire is suggested. The desired wheel slip ratio is varying according road and tire conditions to produce maximum friction force. In order to find optimum desired wheel slip ratio, the sliding mode observer for friction force is used. The proposed sliding mode controller with observer is evaluated in simulation, and the control design is shown to have high performance on roads with constant and varying adhesion coefficients.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.1
• /
• pp.82-89
• /
• 2024

Black ice is very difficult to recognize and reduces the friction of the road surface, causing automobile accidents. Since black ice is difficult to detect, there is a need for a system that identifies black ice in real time and warns the driver. Various studies have been conducted to prevent black ice on road surfaces, but there is a lack of research on systems that identify black ice in real time and warn drivers. In this paper, an real-time image-based analysis system was developed to identify the condition of asphalt road surface, which is widely used in Korea. For this purpose, a dataset was built for each asphalt road surface image, and then the road surface condition was identified as dry, wet, black ice, and snow using deep learning. In addition, temperature and humidity data measured on the actual road surface were used to finalize the road surface condition. When the road surface was determined to be black ice, the salt spray equipment installed on the road was automatically activated. The surface condition recognition system for the asphalt concrete pavement and black ice automatic prevention system developed in this study are expected to ensure safe driving and reduce the incidence of traffic accidents.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.5
• /
• pp.512-519
• /
• 2016

In this study, the tire road friction estimation(TRFE) algorithm for controlling the rear wheel driving force of a 4WD vehicle during acceleration is developed using a standard sensor in an ordinary 4WD passenger car and a speed sensor. The algorithm is constructed for the wheel shaft torque, longitudinal tire force, vertical tire force and maximum tire road friction estimation. The estimation results of shaft torque and tire force were validated using a torque sensor and wheel force transducer. In the algorithm, the current road friction is defined as the proportion calculated between longitudinal and vertical tire force. Slip slop methods using current road friction and slip ratio are applied to estimate the road friction coefficient. Based on this study's results, the traction performance, fuel consumption and drive shaft strength performance of a 4WD vehicle are improved by applying the tire road friction estimation algorithm.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1993.07a
• /
• pp.152-155
• /
• 1993

쇄파대 내외에서 흐름양의 연직구조는 소유사 및 부유사의 이동과 지형변동 등의 표사이동문제에 있어서 중요하다 특히 지면 근방에서 유속분포예측은 노면마찰력의 평가와 관련하여 매우 중요하다. 일반적으로 해안에서 표사이동과 지형변화의 계산에 있어서는 수심평균된 흐름속도를 이용하는 것으로 충분하지만, 사주 또는 사연의 형성문제에 있어서는 3차원적인 유동구조의 파악이 필요하다. (중략)

• The Journal of Bigdata
• /
• v.2 no.2
• /
• pp.129-140
• /
• 2017

Weather acts through low visibility, precipitation, high winds, and temperature extremes to affect driver capabilities, vehicle performance (i.e., traction, stability and maneuverability), pavement friction, roadway infrastructure, crash risk, traffic flow, and agency productivity. Recently a variety of road weather big data sources such as CCTV, road sensor/systems, car sensor have been developed to solve the weather-related problems, This study identifies and defines the types and characteristics of these sources to suggest how to utilize them for car safety and efficiency as well as road management through analyzing domestic and oversea cases of road weather big data applications.

• Journal of Wetlands Research
• /
• v.16 no.3
• /
• pp.423-429
• /
• 2014

Due to high imperviousness rates of the roads, various pollutants originated from vehicle activities and air depositions are accumulated on the road surfaces. The washed-off pollutants can deteriorate the water quality and destroy the aqua-ecosystems with their toxicity. Usually the roads are paved with asphalt and concrete, which can affect on the pollutant concentrations with different frictional forces. Therefore, this research is performed to evaluate the influences of different pavement type on discharged concentrations of pollutant. The results shows the first flush phenomenon was occurred on both pavement types. However, peak concentrations are higher in concrete pavement areas than asphalt pavement because concrete pavement has high contact area with vehicles. The EMCs(Event Mean Concentration) also shows high values in concrete paved roads. As a result of this research, it can be concluded the pavement type is also one of the important affecting factors on pollutant emissions from the roads.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.4
• /
• pp.695-704
• /
• 2016

Rubber deposited during aircraft landing is known as the main cause of reducing surface friction force on wet surfaces. Thus, rubber deposits are removed at regular intervals for sae airplane landing. The high-pressure waterblast method, widely used for the removal of rubber deposits, is regarded as the main cause for the loss of surface material because in this method, water hits the surface directly at a high pressure. In this study, a rubber removal primer is developed to reduce surface damage by lowering the pressure of waterblast relatively during the removal of rubber deposits such that the deposits are removed efficiently even with a lower water pressure. To achieve this, basic materials appropriate for the primer were selected and their performance, penetration rate, and site applicability were evaluated. Based on the evaluations, the proportion of additive required for improving the performance of the basic materials was first determined. Then, the optimum mix ratio was derived through the evaluation of the effect on pavements, and the development of the rubber removal primer was completed.

• Archives of design research
• /
• v.16 no.1
• /
• pp.281-288
• /
• 2003

Beyond the millennium industrial development affects all of our life, and the growth of the automobile among them provides us with convenience of the living. One, however, was regarded as important to recognize the safety of the parking rather today than any past, getting together with the increasing auto population into the popularization gradually. It was needed to develope an active system and safety equipment in order to protect against an accident because there were so many accidents during the parking about which one felt relief. The objectives of this study was to develop a supporting structure with high static friction, adapt to various road environments, such as an unpaved road, a wet paved road, controling an angle, considering a portable and moveable device in order to prevent an accident during parking. As it mentioned above, the novel supporting structure had four strengths rather than a previous supporting structure, a practical new design (1998 084336 B60C) The implication of the study was the inspiration from warning of the parking accident almost 10 % of the total traffic accident in Korea, tries to find a solution to a problem in order to decrease the parking accident, in addition, makes it regulation ,and it was implied to the orientation about the popularization and the practical use of the new supporting structure which was developed