The experiment is conducted to reduce the labor and production cost with the labor save of harvest if cultivating the potatoes using the machine and the results are as follows. On labor saving effect in transparent vinyl mulching, digging working hours per 10a in the case of using tractor are 60 min., fixing + turning time is 5 min. and 30sec., the time of harvest is 65 min and 30sec., digging working hours using cultivator are 99 min. and fixing +turning time is 5 min. and 30sec., but the time of hand harvesting is 990 min. and in digging labor saving effect, tractor shows 94% in the harvesting period and harvest by cultivator 90%. On non mulching cases, the harvest by tractor takes 49 min. and 30 sec. and that by cultivator does 87 min. and 30 sec., and digging labor saving effect shows 94% in the tractor harvest and 90% in the cultivator harvest. Therefore, on the operation efficiency per hour, in the case of tractor with digger vinyl mulching and non mulching show, $0.091\sim0.121ha$ and in the case of cultivator with digger both show $0.057\sim0.069ha$, so in the mechanized harvest of potatoes, the harvest by tractor with digger is the best. On the cost and labor save for harvesting the potatoes with labor saving effect, tractor shows 19 hours and 20 min./10a in vinyl mulching and 19 hours. and 54 min./10a in non mulching, so it shows the short hours for harvesting. And labor saving effect shows $42\sim45%$ in comparison with 35 hours and 21 min. $\sim35$ hours and 23 min.($123,113\sim130,613$ won) of the hand harvest, so the cost was reduced to $71,250\sim72,225$ won. On the cultivator with diggers, vinyl mulching takes 19 hours and 55 min. and non mulching 19 hours and 38 min., so the labor saving effect and cost were reduced to $14\sim44%$ ($72,675\sim73,313$ won) in comparison with the hand harvest.
The Journal of Sustainable Design and Educational Environment Research
/
v.15
no.1
/
pp.1-10
/
2016
School facilities are one of the important educational requirements, and it is necessary to maintain safe and sustainable for the ongoing educational environment. For this reason, educational government department have an effort to produce school facilities that have become safe, comfort, convenient and high-quality. There are many methods to improve existing buildings and build new schools by energy efficient technology. Even though educational environment of school facilities are improved by the efforts, the energy consumption has a huge increase. Energy is a major budget item for schools. The accurate estimation of energy cost is critical for effective budgeting and financing for the school facility maintenance. Accurate energy cost estimation also allow for a anticipatable LCC (Life Cycle Cost) of new school facilities. In this study, in order to produce a basic information about the present energy usage status in domestic school facilities, energy usage quantity is regionally analysed according to physical characteristics of elementary, middle, and high school facilities. Those results will give a chance to see deeply the pros and cons of energy usage each regional school facilities.
Korean Journal of Construction Engineering and Management
/
v.15
no.3
/
pp.83-91
/
2014
The problems of environmental pollutions and resources depletion have been growing issues in global construction recently. Efforts to reduce $CO_2$ emission have been also made in all sectors of construction industry these days. As one of the biggest industries that consume a huge amount of resources and generate complex construction wastes, the construction industry has significant impacts on environment issues. However, systematic approach to manage wastes has been rarely made, and most construction wastes from construction sites are being land-filled or incinerated. In this study, a system is proposed to predict the amount of wastes in visual formats, and to control the process of wastes management. The system's main functions include : (1) to estimate the amount of wastes to be generated in project schedule, (2) to categorize the types of wastes, (3) to determine the timing of taking out wastes from sites, and (4) to share information regarding wastes for recycling. A huge amount of wastes are generated in construction process, but most of the wastes have been discharged in forms of mixed wastes, which make them hardly reused. The system not only provide information on wastes to be generated, but also prevent mixing various wastes by classifying them by types and schedules. This features of the system, along with functions to share wastes information with other agencies outside the site, are expected to enhance the level of wastes recycling to a great extent. By saving construction materials through wastes recycling, the system also contributes in reducing $CO_2$ emission.
Proceedings of the Korean Society for Agricultural Machinery Conference
/
2002.02a
/
pp.479-485
/
2002
본 연구는 초음파를 이용하여 한우도체의 연도를 비파괴적이며 객관적으로 측정할 수 있는 시스템을 개발하기 위해서 수행되었다. 한우도체 연도 측정 시스템은 크게 초음파 측정장치, 자동 탐촉자 수직이동장치, 데이터 획득 및 분석장치로 구성되었는데 초음파 측정장치는 초음파 pulser/receiver 및 탐촉자, 자동 탐촉자 이동장치는 상하운동부, 구동부, 제어부, 데이터 획득 및 분석장치는 digitizer, Labview 5.1을 사용하여 구성되었다. 통합된 시스템을 이용하여 획득된 도체의 초음파 신호를 분석하기 위해 1.0~1.1 MHz의 bandpass filtering을 거쳐 hilbert 변환을 이용, envelope를 구할 수 있었으며 탐촉자와 도체의 최적 접촉 위치를 결정하기 위하여 3단계로 나누어 신호분석을 실시하였다. 시료의 개수는 40개였으며 획득된 envelope를 FFT 변환 후 PLS, PCR 분석을 수행한 결과 7단계의 PCR 분석에서 $R^2$= 0.6474의 유의성 있는 결과를 나타내었으므로 최적 접촉 위치로 결정하였다. 최적 접촉 위치를 통해 시료 80개의 추가 실험을 실시한 결과 PCR 분석에서 $R^2$= 0.4304의 결과를 나타내었으며 이를 이용, 도체의 연도를 측정하는 프로그램을 개발하고 최종 통합 시스템을 구축하였다. 본 한우도체 연도 측정 시스템의 개발을 통해 한우도체의 전단력을 예측하여 연도를 객관적으로 판정 가능할 것으로 생각되며 또한 사이즈의 확대로 도축장에 설치하는 설비로서 가능할 것이라 사료된다. 그러나 추후 좀 더 세밀한 측정과 결과의 보완을 위한 분석방법의 개선에 관한 연구가 진행되어야 할 것이다. 사용해 설계된 장치를 사용자가 쉽게 제작할 수 있도록 하였다. 공정설계프로그램을 통해 설계된 공정은 데이터베이스에 저장이 되며 장치설계프로그램에서 쉽게 이전에 설계했던 공정을 이용할 수 있도록 하여 공정 설계와 장치설계를 연계하도록 하였다.동투하시간과 비용 -종자준비부터 통마늘선별까지의 일관기계화로 투입된 주요작업의 노력은 75∼76%가 절감되고, 재배규모 3ha기준시 비용은 44-53%절감되었음. the annealing texture. Observations by TEM and EBSD revealed the formation of very fine grains of ∼1.0$\mu\textrm{m}$ after CCSS.he dislocations form local defect arrangements at the grooves permitting the substantial reduction in defect density over the remainder of the interfacial area.한 최대의 감자 재배지역을 형성하였다. 제주도는 산지지형과 따뜻한 기온으로 2기작이 가능하고, 감자가공 공장설립과 교통발달에 따른 육지 시장과의 접근이 용이해졌기 때문에 남한에서 2번째로 큰 감자재배지역이 되었다.(요약 및 결론에서 발췌)그람양성균에서 효과적이었으며, 농도별 항균력시험 결과 농도가 증가할수록 비례하여 저해율도 증가함을 알 수 있었다. 첨가농도를 달리하여 미생물의 생육도를 측정한 결과, fraction II磎꼭\ulcorner경우 그람양성균에 대해 500 ppm 이상에서 뚜렷한 증식억제효과를 나타내었다.서 뚜렷한 증식억제효과를 나타내었다.min/+}$계
Proceedings of the Korean Society for Agricultural Machinery Conference
/
2002.02a
/
pp.263-268
/
2002
본 연구는 고추분쇄용 세라믹 롤 분쇄기를 이용하여 고춧가루 생산시, 분쇄효율을 향상시키고자 기존의 롤 분쇄속도 40rpm(0.352m/s)에서 80rpm(0.704%)으로 증가시키고, 기존의 롤 회전비 2:1에서 5:1로 증가시켜 고추분쇄시 전단력 증가로 분쇄능을 향상시켰고, 연구 내용의 주요 결과를 요약하면 다음과 같다. 1. 세라믹치형롤 분쇄속도 40rpm(0.352m/s)에서는 롤 회전비 2:1에서 1,190$\mu\textrm{m}$ 입자가 32.7%, 590$\mu\textrm{m}$ 입자가 19.7%였고, 롤 회전비를 5:1로 증가시 590$\mu\textrm{m}$ 입자가 30.9%, 420$\mu\textrm{m}$ 입자가 17.2%로 중간 미분쇄 영역의 분포가 증가하여 미분쇄 효율이 향상됨을 알 수 있었다. 2. 분쇄물의 롤 통과횟수에 따른 분쇄능은 세라믹치형롤 모두 분쇄속도 80rpm(0.704m/s)에서 분쇄물의 미분쇄능이 향상되었고, 분쇄생성물의 임계처리 횟수가 3~4차임을 분석할 수 있었다. 3. 보통 고춧가루를 생산하는데 분쇄속도 40rpm(0.352m/s), 80rpm(0.704m/s), 두 롤의 회전비 2:1, 3:1, 4:1하에서는 생산되지 않았으나, 롤 회전비 5:1에서는 분쇄속도 40rpm(0.352m/s)일 경우 7차 분쇄후에, 분쇄속도 80rpm(0.704m/s)일 경우 5차분쇄후에 생성되어 분쇄처리횟수가 2회정도 단축되어 전단력 증가로 인하여 분쇄능이 향상된 것으로 분석되었다. 4. 기존의 고춧가루 분쇄조건인 분쇄속도 40rpm(0.352m/s), 롤 회전비 2:1보다 본 연구에서 개발한 분쇄속도 80rpm(0.704m/s), 롤 회전비 5:1인 분쇄조건이, 분쇄처리 횟수 단축 등이 분석됨으로서 섬유질이 많이 포함된 고춧가루 등의 재료가공 분쇄기술이 향상된 것으로 분석되었다.. 마늘재배 일관기계화에 의한 노동투하시간과 비용 -종자준비부터 통마늘선별까지의 일관기계화로 투입된 주요작업의 노력은 75∼76%가 절감되고, 재배규모 3ha기준시 비용은 44-53%절감되었음. the annealing texture. Observations by TEM and EBSD revealed the formation of very fine grains of ∼1.0$\mu\textrm{m}$ after CCSS.he dislocations form local defect arrangements at the grooves permitting the substantial reduction in defect density over the remainder of the interfacial area.한 최대의 감자 재배지역을 형성하였다. 제주도는 산지지형과 따뜻한 기온으로 2기작이 가능하고, 감자가공 공장설립과 교통발달에 따른 육지 시장과의 접근이 용이해졌기 때문에 남한에서 2번째로 큰 감자재배지역이 되었다.(요약 및 결론에서 발췌)그람양성균에서 효과적이었으며, 농도별 항균력시험 결과 농도가 증가할수록 비례하여 저해율도 증가함을 알 수 있었다. 첨가농도를 달리하여 미생물의 생육도를 측정한 결과, fraction II磎꼭\ulcorner경우 그람양성균에 대해 500 ppm 이상에서 뚜렷한 증식억제효과를 나타내었다.서 뚜렷한 증식억제효과를 나타내었다.min/+}$계 수컷 이형접합체 형질전환 마우스에 AIN-76A 정제사료만을 투여한 대조군은 1.40$\pm$0.24(100%)에 비하여 I3C 저농도 투여 실험군(Group 1; 0.85$\pm$0.23; 61%, P<0.01), 그리고 I3C 고농도 투여 실험군(Group 2 ; 1.32$\pm$0.29 ; 94%)의 순으로 감소하였다. 선종의 크기별 종양의 발생개수의
Kim, Y. K.;Hong, J. T.;Choi, Y.;Jun, H. J.;Park, H. J.;Cho, Y. M.
Proceedings of the Korean Society for Agricultural Machinery Conference
/
2002.02a
/
pp.54-59
/
2002
1. 일시수확형 고추의 기계수확 요인을 구명하기 위하여 4종류의 탈과장치를 제작하여 공시고추로 탈과시험을 실시한 결과 탈과장치는 방사대칭식(브러쉬형), 고추이송(공급)속도는 0.1m/s, 탈과장치 간격은 3cm, 탈과장치 회전수는 180rpm에서 정상탈과율 77.3%, 손상률 7.6% 미탈과율 3.0%로 가장 양호한 성적이 나타났다. 2. 방사대칭식(브러쉬형) 탈과장치를 이용하여 무지용 상향착과형 고추, 지주용 하향착과형 고추, 지주용 상향착과형 고추를 공시하여 고추별 탈과시험을 실시한 결과, 고추이송(공급)속도 0.1m/s, 원통사이간격 3cm, 탈과장치 회전수 180rpm에서 가장 양호한 성적이 나왔으며, 지주용 하향착과형 고추가 정상탈과률 82.7%, 손상률 7.4%, 미탈과율 2.7%로 무지주용 상향착과형 고추(52.3%, 14.3%, 12.5%)와 지주용 상향착과형 고추(77.3%, 7.6%. 3.0%)에 비해 기계수확에 적합한 것으로 나타났다. 3. 이상의 고추 기계수확 요인시험의 결과, 탈과장치는 방사대칭식(브러쉬형) 고추종류로는 하향착과형 고추가 기계수확에 바람직한 것으로 나타났으며, 수확 후 회수가 가능한 줄기부착고추를 포함한다면 고추기계수확률은 80% 이상, 꼭지가 떨어진 것이 대부분인 손상고추도 수확 후 즉시 기계건조하여 가공용으로 사용한다고 가정한다면 기계 수확률은 90% 이상 가능하지만, 이것의 수용 여부는 좀 더 폭넓은 의견수렴 및 조사가 필요하다고 사료된다. 4. 고추수확 기계화를 위해서는 실내요인 시험 결과를 토대로 포장에서 수확메커니즘 구명과 더불어 고추 과실이 크고 무지주용 하향착과형 일시수확형 고추 품종의 개발이 병행되어야 한다고 판단된다. 5) 마늘 선별작업 -마늘선별기는 작업성능이 높고 5등급으로 균일 선별되었으며 손상도 없었으나, 기계가 크고 무거워 이동이 곤란하고 가격이 비싸므로 선별등급을 3∼4단계로 줄이고 소형 농가보급형으로 개량제작이 요구됨. 나. 마늘재배 일관기계화에 의한 노동투하시간과 비용 -종자준비부터 통마늘선별까지의 일관기계화로 투입된 주요작업의 노력은 75∼76%가 절감되고, 재배규모 3ha기준시 비용은 44-53%절감되었음. the annealing texture. Observations by TEM and EBSD revealed the formation of very fine grains of ∼1.0$\mu\textrm{m}$ after CCSS.he dislocations form local defect arrangements at the grooves permitting the substantial reduction in defect density over the remainder of the interfacial area.한 최대의 감자 재배지역을 형성하였다. 제주도는 산지지형과 따뜻한 기온으로 2기작이 가능하고, 감자가공 공장설립과 교통발달에 따른 육지 시장과의 접근이 용이해졌기 때문에 남한에서 2번째로 큰 감자재배지역이 되었다.(요약 및 결론에서 발췌)그람양성균에서 효과적이었으며, 농도별 항균력시험 결과 농도가 증가할수록 비례하여 저해율도 증가함을 알 수 있었다. 첨가농도를 달리하여 미생물의 생육도를 측정한 결과, fraction II磎꼭\ulcorner경우 그람양성균에 대해 500 ppm 이상에서 뚜렷한 증식억제효과를 나타내었다.서 뚜렷한 증식억제효과를 나타내었다.
Housing issues such as mushrooming slums remain as chronic in most developing countries. Due to the state's restrained capacity, the housing-vulnerable's self-help approaches have been increasingly inevitable and vital for addressing the housing issues. However, there are still two challenges: securing good quality with economic efficiency, and climate change mitigation and adaptation. This study aims at doing an architectural experiment by developing and educating the production of eco-friendly interlocking stabilized soil bricks (ISSB) by employing vernacular materials and technologies for housing-vulnerable communities in Indonesia. In collaboration with a local architectural NGO, the study features a co-creation workshop in which 40 evicted households participate in the whole process. Soil analysis, mixed design, compression tests, and economic analysis are carried out. This paper illustrates that ISSB also has a high potential as an alternative to a burned brick or a cement block. The application of ISSB to self-help housing is expected to have socioeconomic and environmental effects, thereby facilitating the housing-vulnerable's self-help approaches and contributing to addressing the housing challenges in Indonesia.
Lee, Eul Tai;Cho, Sang Kyun;Song, Yeon Sang;Jang, Young Suk;Choi, In Hu;Oh, Yong Bee
Horticultural Science & Technology
/
v.19
no.4
/
pp.476-482
/
2001
This experiment was conducted to evaluate the effect of slow-release fertilizer application on quality elevation of onion (Allium cepa L.) in southwestern sea. The slow-release fertilizers used were NIAST (National Institute of Agricultural Science and Technology) I, II, CDU (Crotonylidene Diurea), UF (Urea-Formaldehydes), and IBDU (Isobutylidene Diurea) 30, 50. Growth of the onion plant treated with slow-release fertilizer showed better than the control. However, a rate of infected plant to downy mildew was low as compared with control. Chlorophyll and total nitrogen contents were high in control, whereas firmness, soluble solid content, number and thickness of scaly leaves were high in slow-release fertilizer plot. In early maturing onion, total marketable bulb yield was higher in slow-release fertilizer plot than all other fertilizer treatments. Total marketable bulb yield in late maturing onion treated with slow-release fertilizer was slightly decreased. Decaying loss and the rate of sprouting during storage period decreased in slow-release fertilizer application. In summary, application of slow-release fertilizer increased marketable yield, storability after harvest and also reduced labor needs for top dressing.
A research on logistics cost needs a great deal of effort to calculate logistics cost and analyze its characteristics due to the complexity of logistics cost components. For this reason, the logistics cost is generally calculated based on the government level analysis. However, the standards for calculating logistics cost have not been obvious so far. Furthermore, it is true that it takes a long time and a lot of money to evaluate the percentage of each logistics cost component. The expansion of SCM entities has diversified the factors determining the logistics cost and the change of business environment has had an effect on the components of logistics costs. Therefore, in order to research on logistics cost, it is needed to focused on not only the segmentation of logistics cost components but also on their characteristics, and to separate the former from the latter. That is because the logistics cost components or the characteristics of these components depend on the current situation and conditions of companies. In addition, a strategy to reduce the components of logistics costs such as the transport cost and the storage cost without analyzing the characteristics and causes of the logistics cost could be an alternative unsuitable for the current status of companies concerned. In conclusion, this study was aimed at investigating the factors which are required to fundamentally assume and consider in an effort to calculate and reduce logistics cost based on analyzing the characteristics of logistics cost components.
Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
/
2001.11a
/
pp.14-14
/
2001
현재 제지용 펄프 및 펼프 원료의 국내 자급상태는 매우 낮은 수준이다. 따라서 원료 가격변동과 환율에 따라 수익성은 물론, 원료 수급에도 큰 영향을 받게 된다. 최근 버 진펄프의 가격상승은 재생펄프 사용량과 고지수입량을 더욱 늘리고 있으며, 이들의 사 용에 따른 품질저하 개선노력도 꾸준히 행해지고 있다. 그러나 원가절감과 품질유지라 는 두 마리 토끼를 한꺼번에 잡는 것은 그리 쉬운 일이 아니며 그 효과 또한 점점 미 미해 지고 있는 실정이다. 외국의 경우 이러한 문제점들을 펄프소재면에서 접근하여 해 결하고자 하는 시도가 있었다. 중국은 벗짚펄프를 제지용으로 적용하여 오랜 시행착오 끝에 성공을 거두고 있으며, 남미에서도 수수 등을 이용한 제지용 펼프 개발에 노력과 투자를 아끼지 않고 있다. 이는 제한된 원료의 사용만으로 직면하고 있는 여러 문제점 들을 해결하기가 힘들다는 언식에서 출발한 것이며, 새로운 원료개발 자체가 그 해결방 안으로서 충분한 가치가 있음을 보여준다고 하겠다. 이와 같은 맥락에 따라 국내에서 적용이 가능한 소재를 조사하였으며 우선적으로 신서란을 선택하게 되었다. 신서란은 뉴질랜드가 원산지로 알려져 있으며 오래전부터 제주도에 자생하고 있는 다년생 초본류이다. 수많은 경질섬유(hard fiber)중에서도 경제적으로 재배되는 유일한 작물로 선박용 로프, 그물, 범포 등의 원료로 사용되었으나 현재는 화학섬유로 대체되 어 그 사용이 전무한 실정이다. 선서란은 고강도와 우수한 유연성, 탄력성 및 양호한 광학적 성질을 가지고 있으며 무엇보다 척박한 땅에서도 생장이 왕성하여 재배가 쉽다 는 것이 가장 큰 장점이다. 본 연구는 펄프용 섬유로서 양호한 기본특성을 가진 신서란 을 이용한 펄프를 기존 제지공정에 일정량 투입함으로써 얻고자 하는 종이의 일반물성 개선 및 특수기능 향상에 도움이 되는 제지용 펄프로서의 가능성을 알아보고자 하였다.이어서 몇십%의 현을 억제하지는 못한다는 결론을 도출할 수 있었다. 연구의 결과를 요약하면 다음과 같다. 첫째, 한국과 미국 패션제품의 지난 십년간의 가격 과 품질의 상관관계는 매우 약한 정(+)의 상관을 가지고 있었다. 한국패션제품의 전체 서열상관계수의 평균은 0.091이었고, 미국의 상관계수 평균은 0.192였 다. 상관계수의 수치만으로 볼 때 한국보다는 미국 패션제품의 가격과 품질간의 상관관계가 조금 높게 나타났으나, 양국간 통계적인 차이는 없었다. 또한, 한국 패션제품의 경우에는 제품군의 가격대별 상관관계를 살펴보았는데, 그 결과 1만원 미만의 저가 제품군과 330만원이상의 고가의 제품군의 경우 부(-)의 상관계수를 나타냈다. 둘째. 1990년대 한국과 미국 패션시장의 가격과 품질간의 상관계수의 범위는 제품군별. 산업범주별 로 상이한 분포를 보이고 있었다. 패션제품군별로 보 면, 한국의 경우는 가장 높은 '여행용가방(r = 0.707)' 에서 가장 낮은 '자외선 차단화장품(r = -0.58)'까지, 그리고 미국 패션제품군의 상관계수의 범위는 '팬티 스타킹'의 0.820에서 '남성용 런닝슈즈'의 -0.472까지의 분포를 나타냈다. 마지막으로, 제품의 가격과 품질에 대한 정보를 소비자가 알 경우 얻을 수 있는 소비자의 구매이득 을 추산한 결과 패션제품시장에서 완전한 품질정보를 가지고 있다고 가정한 '현명한 사람'은, 최고가격의 제품만을 구입한다고 가정한 '부유한 사람들'의 구입방식에 비해 최고 좋은 품질의 상품을 총 지불액의 비율로 보아, 한국의 소비자는 약 50% 정도를, 미국의 소비자는 약 91%나 되는 액수를 절약하여 구매할 수 있는 것으로 나타났다. 이상의 본 연구의 결과를 종합하여 볼 때 한국과 미국 모두 제품군별, 그리고 산업범주별로 상관관계가 차이를 보이고 있어, 양국의 소비자들이 패션제품 의 품질을 평가함에 있어 오로지 가격에 대한
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.