• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.157.1-157.1
• /
• 2012

1990년대 제안된 RTK(Real-Time Kinematics)는 GNSS/GPS 반송파 위상(carrier phase) 관측값을 이용한 방식으로 cm 수준의 정확도를 실시간으로 산출할 수 있어 측지 측량 등 다양한 분야에서 활용되고 있다. 그러나 한 가지 중요한 단점은 이 방식을 사용하는 기준국과 사용자는 10~20km 이내에 존재해야만 빠르고 신뢰할 수 있는 해를 산출할 수 있다는 점이다. 이는 궤도오차, 대류층 및 전리층 오차에 공간 상관성(spatially correlated) 있기 때문인데, 사용자 주변을 둘러싼 다중 기준국들의 측정치를 조합하여 보상하거나 모델링하여 줄이는 방식인 다중 기준국 네트워크 기반의 RTK 알고리즘이 제안되어 사용되고 있다. 다중 기준국 네트워크 기반의 RTK 프로세스에서 기준국간 미지정수 결정은 전 과정의 핵심 프로세스라고 할 수 있으며, 관련되어 많은 기술들이 제안되고 연구되어 왔다. 특히, 1980년대 말부터 현재까지 후처리 기반으로 꾸준하게 연구되고 있는 Blewitt에 의해 전리층 제거 조합과 Wide-lane 반송파 위상 조합을 활용한 미지정수 검색 방법이 대표적이며 이후에도 Gao, Colombo등 다양한 연구자에 의해 활용되었다. 이 연구에서는 실시간으로 다중 기준국 반송파 미지정수를 결정하는 기술에 대한 연구를 수행하였다. L1, L2 관측값 조합으로 인한 관측값의 잡음 수준이 증가하는 영향을 피하기 위해 L1, L2 반송파 위상 및 의사거리를 그대로 관측값으로 사용하여 사용자 위치 및 속도, 기준국간 이중 차분된 전리층 지연 수직성분, 대류층 wet 지연 수직 성분, 이중 차분된 미지정수를 미지의 상태변수로 확장 칼만필터를 통해 직접적으로 추정하는 방식으로 미지정수의 실수해를 결정하였고, 정수해는 실시간에 적합한 MLAMBDA 기법과 비율테스트를 통한 정수해 검정기법을 통해 결정하였다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.2
• /
• pp.21-28
• /
• 2010

The classical RTK System requires that GPS data is transmitted from a single reference receiver to one or more roving units. But its error increase due to distance between reference and rover. VRS(Virtual Reference Station) system, a network of reference stations can be used to isolate the components of these systematic errors and use the resultant corrections to create Virtual Reference Stations at any location within the network. Use of a VRS significantly reduces the effects of systematic errors and improved accuracy. In this study, Network-RTK survey using VRS serviced by NGII(National Geographic Information Institute) was performed and the results were compared with results of total station surveying and notified coordinates of cadastral control points for utilization assessment of VRS.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.4
• /
• pp.321-329
• /
• 2013

Despite the advantage of unlimited access, there are insufficient studies for the accuracy and stability of FKP that blocks the spread of the system for various applications. Therefore, we performed a long-term analysis from continuous real-time positioning, and investigated the error characteristics dependent on the size and the surrounding environment. The FKP shows significant changes in the positioning accuracy at different times of day, where the accuracy during daytime is worse than that of nighttime. In addition, the size and deviation of FKP correction may change with the ionospheric conditions, and high correlation between ambiguity resolution rate and the deviation of correction was observed. The receivers continuously request the correction information in order to cope with sudden variability of ionosphere. On the other hand, the correction information was not received up to an hour in case of stable ionospheric condition. It is noteworthy that the outliers of FKP are clustered in their position with some biases. Since several meters of errors can be occurred for kinematic positioning with FKP, therefore, it is necessary to make appropriate preparation for real-time applications.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.93-99
• /
• 2010

Since the facility management for various facilities in urban area are conducted by general managers who have poor knowledge for surveying technology, it is not easy to trace the exact location of the facility in a short time with the GIS map only by themselves in the field. In order to improve it, VRS-RTK or SBAS DGPS system integrated with UMPC and PDA which is uploaded GIS field software are being used recently however lot of difficulties are still existed with the GPS positioning in urban area due to the lack of visible satellites, no reception of correction data and multipath error by the interruption of the high buildings and houses etc. Therefore, in this study, we applied with Network DGPS system which allows better reception of satellite signal and correction data even in dense housing areas with the use of GNSS receiver and CDMA mobile phone. Based on the analysis of field data, it was confirmed that standard deviations of the Network DGPS positioning are 0.3 to 0.84m with a very high positioning rate even in dense housing areas. Therefore, it was concluded that the Network DGPS system could be used widely to fast and accurate positioning for various facilities management works in dense housing areas in the future.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.1
• /
• pp.693-700
• /
• 2009

For real-time precise GPS data processing such as a long baseline network RTK (Real-Time Kinematic) survey, PPP (Precise Point Positioning) and monitoring of ionospheric/tropospheric delays, it is necessary to guarantee accuracy comparable to IGS (International GNSS Service) precise orbit with no latency. As a preliminary study for determining near real-time satellite orbits, the general procedures of satellite orbit determination, especially the dynamic approach, were studied. In addition, the transformation between terrestrial and inertial reference frames was tested to integrate acceleration. The IAU 1976/1980 precession/nutation model showed a consistency of 0.05 mas with IAU 2000A model. Since the IAU 2000A model has a large number of nutation components, it took more time to compute the transformation matrix. The classical method with IAU 2000A model was two times faster than the NRO (non-rotating origin) approach, while there is no practical difference between two transformation matrices.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.296-301
• /
• 2021

GPR is used for non-destructive investigations, ground investigations, and underground facilities exploration at construction sites. In this study, the applicability to GPR exploration of water pipes linked to Network RTK was presented. Data on the water supply pipes in the study site were acquired using GPR, and the location and depth of buried water pipes could be measured. The accuracy was evaluated from the GNSS observation performance and showed a deviation of -0.16m ~ 0.15m. This satisfied the equipment performance of the public survey work regulation, suggesting that the exploration of water pipes using GPR is possible. Because GPR does not require grounding installation, as in conventional metal pipe detectors, it will increase the efficiency of work for underground facility exploration. Exploration using GPR can acquire the location and depth of metallic and non-metallic underground facilities, so it can be utilized in the construction of a GIS system. If a comparison of the exploration characteristics is carried out, it will be possible to present various uses of underground facility exploration using GPR.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.457-467
• /
• 2018

Currently, the regulation and rules for public surveying and the UCPs (Unified Control Points) adapts those of the triangulated traverse surveying. In addition, such regulations do not take account of the unique characteristics of GNSS (Global Navigation Satellite System) surveying, thus there are difficulties in field work and data processing afterwards. A detailed procesure of GNSS processing has not yet been described either, and the verification of accuracy does not follow the generic standards. In order to propose an appropriate procedure for field surveys, we processed a short session (30 minutes) based on the scenarios similar to actual situations. The reference network in Seoul was used to process the same data span for 3 days. The temporal variation during the day was evaluated as well. We analyzed the accuracy of the estimated coordinates depending on the parameterization of tropospheric delay, which was compared with the 24-hr static processing results. Estimating the tropospheric delay is advantageous for the accuracy and stability of the coordinates, resulting in about 5 mm and 10 mm of RMSE (Root Mean Squared Error) for horizontal and vertical components, respectively. Based on the test results, we propose a procedure to estimate the daily solution and then combine them to estimate the final solution by applying the minimum constraints (no-net-translation condition). It is necessary to develop a web-based processing system using a high-end softwares. Additionally, it is also required to standardize the ID of the public control points and the UCPs for the automatic GNSS processing.

• Journal of Cadastre & Land InformatiX
• /
• v.48 no.1
• /
• pp.139-151
• /
• 2018

The National Base Map construction consists of the regular correction work of dividing the whole country into two regions and carrying out the modification Plotting by aerial photographs every two years as well as the real time updating work of correcting the major change feature within two weeks by the field survey and the As-Built Drawing. In the case of the Building Layout Drawing of Korea Real estate Administration intelligence System(KRAS) used for real time updating work of the National base map, the coordinate transformation error is included in the positional error when applied to the National Base Map based on the World Geodetic Reference System as the coordinate system based on the Regional Geodetic Reference System. In addition, National Base Map is registered based on the outline(eaves line) of the building in the Digital Topographic Map, and the Cadastral and Architecture are registered based on the building center line. Therefore, the Building Object management standard is inconsistent. In order to investigate the improvement method, the network RTK survey was conducted directly on a location of the Building Layout Drawing of Korea Real estate Administration intelligence System(KRAS) and the problems were analyzed by comparing with the plane plotting position reference in National Base Map. In the case of the general structure with the difference on the Building center line and the eaves line, beside the location information was different also the difference in the ratio of the building object was different between Building center line and the eave. In conclusion, it is necessary to provide the Base data of the double layer of the Building center line and the outline of the building(eaves line) in order to utilize the Building Layout Drawing of Korea Real estate Administration intelligence System(KRAS). In addition, it is necessary to study an organic map update process that can acquire the up-to-dateness and the accuracy at the same time.