• Proceedings of the Korea Contents Association Conference
• /
• 2012.05a
• /
• pp.325-326
• /
• 2012

세 얼간이는 국내 포탈 사이트에 평점 등록한 네티즌만 2만여 명이 넘었으며, 네이버 9.43, 다음 9.7, 네이트 9.5 등의 평점으로 역대 영화 평점 순위 1위를 차지했다. 반지의 제왕 같은 판타지 블록버스터, 타이타닉, 대부 등 세계적인 흥행으로 전설이 되어버린 작품들의 기록을 뛰어넘는 것으로 전 세계 부동의 흥행 1위 아바타를 뛰어넘고, 700억 원이 넘는 수익을 창출했다. 세 얼간이가 성공할 수 있었던 것은 몇 가지로 볼 수 있는데 영화 전편에 걸친 스토리텔링과 비선형적 스토리구성, 모션의 활용, 사운드의 활용, 이벤트의 활용 등 인터랙션과 스토리텔링의 효과가 우수하였다고 사료한다.

• 월간낙농육우
• /
• v.36 no.9
• /
• pp.145-148
• /
• 2016

올 여름은 한 달이 넘도록 열대야가 지속될 정도로 가히 '살인적' 더위였다. 폭염으로 인한 고온 스트레스는 젖소들에게 단순히 산유량 저하뿐만 아니라, 다가오는 가을철에 수태율을 감소시키고 대사성 질병 면역력을 떨어뜨려 큰 피해를 준다. 이에 농가들은 고온 스트레스를 최소화하기 위해 차광막을 설치하거나 지붕에 스프링클러를 분사하는 등 하루하루 긴장 속에 이 계절을 보내야 했다. 하지만 올해 같은 폭염 속에서도 차광막 하나 없이 축사를 관리한 농가들이 있었다. 바로 'P.C(폴리카보네이트, Poly-Carbonate) 다기능 지붕재 엠보(이하 P.C엠보)'를 설치한 목장들이다. 직사광선의 피해를 최소화할 수 있는 'P.C 다기능 지붕재 엠보'를 개발한 (주)대한철강(대표 김상국)을 찾아가 봤다.

• Polymer(Korea)
• /
• v.29 no.6
• /
• pp.588-592
• /
• 2005

For the purpose of obtaining polycarbonate film which blocks ultra-violet ion beam was irradiated onto the surface of PC film. This method has gotten several advantages compared with the techniques, such as the protection of changes in film thickness and UV blocking material deposited onto a base film. In order to investigate UV blocking PC film, the optical and chemical characteristics, surface morphology and lightfastness were confirmed by UV/Vis, FTIR(ATR) spectroscopy, AFM, and Q-UV fasoess analyses. As a result, it was shown that the modified PC film was able to block almost all of UV region and easily control the degree of UV block. The optical changes in the film were attributed to chemical changes in PC surface by ion beam irradiation. Moreover, we expect that the modified PC film can durably block UV due to no changes in colour and UV transmittance after UV fastness test.

• Korean Chemical Engineering Research
• /
• v.48 no.5
• /
• pp.621-626
• /
• 2010

In this study, imidazole-based ionic liquid on polystyrene was prepared and its catalytic performance in the cycloaddition of $CO_2$ with allyl glycidyl ether(AGE) to produce allyl glycidyl carbonate was investigated. The ionic liquid was generated on the polystyrene-based polymer through the immobilization of imidazole. The prepared catalyst was characterized using a number of instrumental analysis including EA, FT-IR, TGA and SEM. The immobilized ionic liquid showed very good catalytic activity for the cycloaddition of $CO_2$ with AGE, having 80% of AGE conversion with over 96% of the carbonate selectivity at $120^{\circ}C$ under 1.48 MPa $CO_2$ pressure. The immobilized ionic liquid can be used for the reaction up to four consecutive runs without significant loss of its catalytic activity.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.109.2-109.2
• /
• 2010

세라믹 필터는 여러 종류의 분진제거 시스템에서 연소 배가스 정제를 위한 가장 적절한 소재로 알려져 있다. 현재까지 다양한 형태의 세라믹 필터가 개발되고 있는데, 캔들 타입(candle type), 튜브 타입(tubular type), 평판 타입(parallel flow type) 등이 그 예이다. 통상적으로 세라믹 캔들 필터는 가압유동층복합발전(PFBC, Pressurize Fluidized-Bed Combustion), 석탄가스화복합발전(IGCC, Integrated coal Gasification Combined Cycle), 석탄가스화연료전지복합발전(IGFC, Integrated coal Gasification Fuel cell Combined cycle)에서 고온 배가스 정제용으로 사용되고 있다. 일반적으로 IGCC나 CTL 합성가스 정제시스템의 경우에는 높은 고압(약 25기압)과 미세분진이 함유되어 있는 분위기에서 운전된다. 그러므로 이때 사용되는 초청정용 세라믹 집진필터는 고온, 고압 및 부식 환경에서 50 MPa 이상을 갖는 높은 강도와 내식성을 갖도록 개발되어야 하기 때문에 SiC(Silicon Carbide)가 가장 적절한 캔들 필터 소재로 적용되고 있다. 이에 따라 집진용 SiC 세라믹 캔들 필터를 개발하기 위해서는 고온에서 내산화성이 우수하고, 부피팽창에 의한 균열이 발생하지 않는 무기결합재의 선정 및 이를 통한 소재의 특성 최적화가 가장 중요한 부분이라 할 수 있다. 본 연구에서는 IGCC나 CTL 공정에 적용하기 위한 SiC 캔들 필터 소재 개발을 위해 래밍성형 공정으로 1m급의 탄화규소 캔들 필터 시작품을 제작하여 SiC 출발입자 크기와 무기계 결합재인 스트론튬 카보네이트의 첨가량 변화에 따른 필터 소재의 특성 평가를 수행하였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.3
• /
• pp.120-126
• /
• 2014

Translucent green colored opal glass was fabricated to substitute polycarbonate diffuser of LED lighting in order to solve the durability problem. Batch materials of green colored opal glass with the composition of calcium phosphate for opacifier and iron oxide for colorant were made and melted at $1550^{\circ}C$. As the results, translucent green colored opal glass was obtaind, which had excellent optical properties compare with nomal color glass for the diffuser of LED lighting, with no dazzling from direct light by high haze value over 90 % and low parallel transmittance value about 1 %. Therefore, it is concluded that this translucent green colored opal glass can be used for the glass diffuser materials of LED lighting with high heat resistance and high durability to substitute polycarbonate diffuser.

• Polymer(Korea)
• /
• v.34 no.3
• /
• pp.237-241
• /
• 2010

Mechanical characteristics and chemical resistance have been investigated for PC/PBT blends. The changes in mechanical performance of PC/PBT blends was monitored during the treatment with both the PC thinner and general-purpose thinner to figure out the chemical resistance. The PC thinner greatly affected the mechanical properties of PC/PBT blends compared with general-purpose thinner. In the case of PC thinner treatment, the mechanical performance was improved with increased PC content at lower PC content ranges, say below 50%. However the mechanical performance was dropped rapidly at higher PC content ranges due to poor chemical resistance of PC. Transparent pure PC specimen became opaque after chemical treatment with PC thinner, and this can be interpreted by solvent-induced crystallization.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.3
• /
• pp.1-6
• /
• 2013

This study has focused on transparency recovering of the polycarbonate by polishing its surface for recycling. The polycarbonate has many properties such as excellent mechanical strength, electrical insulating, superior heat resistance to other plastic material and especially good transparency. It has been used as barrier for the traffic noise at the roadside and the greenhouse for the palm house. But the polycarbonate has changed slightly as time goes by 10 years because of exposure to the strong sunlight and oxidization in the atmosphere, as result has lost its transparency. Magnetic assisted polishing has been utilized as an effective polishing method to recover the transparency of polycarbonate. The polycarbonate which has been used for 10 years was adopted as the sample. The first surface roughness of the sample was 1$1.23{\mu}mRa$, $7.5{\mu}mRz(DIN)$ respectively. In the experimental results, it showed that the surface roughness of the polished sample improved $0.013{\mu}mRa$, $0.08{\mu}mRz(DIN)$ from the first surface roughness respectively. The surface roughness get almost back again by magnetic assisted polishing. These results also showed that the magnetic assisted polishing was efficient machining method to reuse the polycarbonate material.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.273-277
• /
• 1998

The synthesis of hydroxy-terminated poly(propylene carbonate)(HTPPC) was performed by the reaction of propylene carbonate(PC) with alcohol initiator using metal alkoxides, crown ethers and quaternary onium salts as catalysts. The effects of catalyst structure, types and concentration of alcohol, and solvent were investigated. Among the alkoxide catalysts tested, the ones with higher Lewis acidity and with more nucleophilic alkoxide anion showed higher catalytic activity. Mixed catalysts of metal alkoxied and crown ether showed higher conversion of PC than metal alkoxide alone. Quaternary onium salts of bulky cation exhibited higher catalytic activity. High polar solvent showed higher yield of HTPPC and the yield increased with the decrease of [PC]/[Initiator] ratio.

• Korean Chemical Engineering Research
• /
• v.48 no.3
• /
• pp.355-358
• /
• 2010

Inductively coupled low temperature plasmas with oxygen, argon, mixture of oxygen and argon, and nitrogen have been used to modify polycarbonate(PC) films at the various process conditions. All plasma treatments generally had a tendency to increase the surface roughness of PC regardless of process conditions. The treatment of oxygen plasma showed the highest value in the surface roughness and mostly enhanced the generation of oxygen containing polar groups as much as 43% in comparison of untreated PC. The contact angle of untreated PC decreased from $82.31^{\circ}$ to the lowest value of $9.17^{\circ}$ after oxygen plasma treatment. The increase of RF delivered power had an effect on the rapid reduction of contact angle, but gas flow rates did not effect to reduce contact angles so much.