• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.123-126
• /
• 1997

In this study, we investigated the Pretilt ang1e generation in nematic liquid crystal (NLC) by using the transcription, alignment on polyimide(Pl) surfaces. That the uniform alignment of NLC is observed by microphotograph textures in LC cells on Pl surface. We obtained that the pretilt angle of NLC are generated about 3.6$^{\circ}$on Pl surface. It is considered that the LC alignment by transcription alignment method is attributed to memory effect of LC on Pl surface.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.951-954
• /
• 2001

We investigated the aligning capabilities for nematic liquid crystal (NLC) using a in-situ photodimerization method on various photopolymer surfaces. High Pretilt angle of the NLC can be measured by obliquely polarized UV exposure of 30$^{\circ}$on a photo-crosslinkable polyimide (PI) based polymer surface for 3 min. The pretilt angle of the NLC generated on the photopolymer surface using the in-situ photodimerization method was higher than that of a blending photopolymers (PI and cinnamate materials).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.127-129
• /
• 1997

The high pretilt angles in nematic liquid crystals (NLCs) have been generated on robbed polythiophene (PTP) surfaces with alkyl chain lengths. The pretilt angle of the NLC was observed on unidirectionally rubbed PTP surfaces with alkyl chains with more than 9 carbon atoms. We obtained the Pretilt angle of 15~40$^{\circ}$ on rubbed PTP surfaces with 10 carbon atoms in the a1ky1 chain. Also, the pretilt angles of 65~80$^{\circ}$ of NLC were obtained on rubbed PTP surfaces with 11 and 12 carbon atoms in the alkyl chain. We suggest that this high pretilt angle generation in NLC is due to the surface-excluded volume effect by the alkyl chain lengths between. the LCs and the PTP surfaces. Finally, we conclude the odd-even effect on rubbed PTP surfaces is clearly contributed to the pretilt angle generation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.2
• /
• pp.130-132
• /
• 2001

The mechanisms of pretilt angle generation in nematic liquid crystal (NLC) with negative dielectric anisotropy on a rubbed polyimide (PI) surface for homeotropic alignment were studied. The pretilt angle of negative type NLC was smaller than that of the positive type NLC for all rubbing strength regions on the rubbed PI surface. The pretilt angle generated in NLC does not attributable to steric interaction between the fluorine moiety of NLC and the polymer surface on the rubbed PI surface. Consequently, the mechanism of the pretilt angle generation for homeotropic alignment is different from the one for homogeneous alignment.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1453-1455
• /
• 1996

The odd-even effect of the alkyl chain length of rubbed polyimide Langmuir-Blodgett (LB) surfaces on the extrapolation length of 5CB has been successfully evaluated for the first time by measuring polar anchoring strength. The extrapolation length of 5CB for rubbed PI-LB surfaces with even-numbers is small compared with odd-numbers for alkyl chain lengths of greater than 7 carbons. The extrapolation length of 5CB on rubbed PI-LB surfaces with odd-numbers increases gradually as the temperature increases but tends to diverge near the clearing temperature (Tc=$35.3^{\circ}C$). The extrapolation length diverges because of rapidly decreasing surface order near $T_c$. We suggest that the polar anchoring strength on rubbed PI-LB surfaces with even-number is strong because of relatively high surface ordering caused by more crystalline surfaces. Finally, we conclude that the odd-even effects of the polar anchoring strength in NLCs are strongly related to the character of the polymer and observed clearly for long alkyl chain lengths.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.12
• /
• pp.1023-1026
• /
• 2001

The control of high pretilt angle for nematic liquid crystal (NLC) with negative dielectric anisotropy on the rubbed blending polyimide (PI) of homeotropic and homogeneous alignment surface was studied. High LC pretilt angle on the rubbing blending polyimide of homeotropic PI and SE-7492 surface was measured and the LC pretilt angle increased wish blending ratio and rubbing strength. However, the low LC pretilt angle on the rubbed blending polyimide of homeotropic PI and SE-150 surface was measured. The high pretilt angle of NLC can be achieved by using the blending PI surface.

• The Korean Journal of Rheology
• /
• v.9 no.4
• /
• pp.200-205
• /
• 1997

등방상에서는 폴리파라페닐렌테레프탈아미드(PPD-T)와 히드록시 프로필 셀룰로오 스(HPC)가 비슷한 유변학적 거동을 보였다. 그러나 이방성에서는 네마틱상을 형성하는 PPD-T와 콜레스테릭상(또는 꼬인 네마틱상)을 형성하는 HPC는 상이한 유변학적 특성을 나타냈다. 이방상을 나타내는 임계농도(C*)이상의 농도에서 Herchel-Bulkey 모델에 의해 얻 어진 항복응력을 보면 HPC의 경우 농도에 관계없이 거의 일정한 값을 나타낸 반면PPD-T 의경우에는 농도증가와 더불어 항북응력값이 크게 증가하였다. 또한 PPD-T가 일\ulcorner거으로 HPC보다 큰값의 항복응력을 나타냈다. 진동수 1 rad/s 에서는 PPD-T와 HPCahen 탄성계 수 G＇/2G＂가 농도의 증가와 더불어 증가하엿다. 그러나 100rad/s 에서는 HPCdmlruddn 임계농도이상의 농도에서 농도증가와 더불어 탄성계수값이 단순감소한 반면 PPD-T의 경우 에는 포화농도(B-point)이상의 농도에서 농도증가와 더불어 탄성계수값이 계속적으로 증가 하였다. HPC의 경우 저장탄성률이 변형정도의 영향을 받지 않았으나 PPD-T의 경우에는 저장탄성률이 변형정도에 매우 민감하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.4
• /
• pp.336-340
• /
• 2001

We have investigated the generation of pretilt angle and alignment stability for a nematic liquid crystal (NLC) with obliquely polarized UV exposure on the three kinds of photo-polymer. High pretilt angle of the NLC was obtained by polarized UV exposure on a PM4Ch surface for 1 min. But, the low pretilt angle of he NLC on a PVCi surface was observed. The pretilt angle generated is attributed ot the photosensitivity by the long side chaining of photo-polymer. Also, a good thermal stability of the three kinds of photo-polymer were obtained by thermogravimetric analysis (TGA) measurement until 300$^{\circ}C$. Finally, the good LC aligning capabilities using the photodimerization method were observed by annealing-treatment until 150$^{\circ}C$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.549-552
• /
• 1999

We have developed an novel vertical-alignment (VA) - $\pi$ cell mode that provides a wide viewing angle and fast response times for negative dielectric anisotropy nematic liquid crystal (NLC) on a homeotropic polyimide (PI) surfaces. We had the good voltage-transmittance curves and low driving voltages were achieved with the novel VA - $\pi$ cell mode without negative compensation film. Iso-viewing angle characteristics using the novel VA - $\pi$ cell mode without negative compensation film of NLC was also successfully observed. As well a fast response time of 31.7ms for the novel VA - $\pi$ cell mode was measured. Consequently, It is seen that by using the novel VA - $\pi$ cell mode the iso-viewing angle, fast response time, and low driving voltage characteristics can be achieved.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.12 no.1
• /
• pp.75-80
• /
• 1999

In this study, we have investigated the relationship between the generation of pretilt angle and the polarization component in cells with UV light irradiation on polyimide (PI) surface. It was found that the generated pretilt angle is about $1.4^{\circ}$ with S-polarized UV light irradiation of $75^{\circ}$ on PI surface; it may be attributed to the asymmetry triangular of polymer surface with oblique S-polarized UV light irradiation on PI surface. Also, we measured that the generated pretilt angle is about $2.0^{\circ}$ with oblique P polarized UV light irradiation of $75^{\circ}$ on PI surface. Consequently, we suggest that the generated pretilt angle of the NLC is attributed to the interaction between the LC molecules and the polymer surface with oblique polarized UV light irradiation on PI surface.