• Food Science and Preservation
• /
• v.17 no.1
• /
• pp.1-8
• /
• 2010

We investigated the effect of freezing on changes in the chemical components of semi-dried red pepper (SDRP). We used storage temperatures of $0^{\circ}C,\;-10^{\circ}C,\;-20^{\circ}C,\;and\;-70^{\circ}C$. After 30 days of storage, capsaicin content had decreased by 40% at $0^{\circ}C$ and by 21% at $-20^{\circ}C$. Initial vitamin C content was 1,358.02 mg%. Compared with control, the $0^{\circ}C$ storage group showed a significant decrease in vitamin C content but no such decrease was noted in the $-20^{\circ}C$ and $-70^{\circ}C$ storage groups after 30 days. ASTA values were not influenced by storage temperature or period, in agreement with previous results. We concluded that storage was effective at temperatures of less than $-20^{\circ}C$. Next, both dried red pepper (DRP) and SDRP were stored at $-20^{\circ}C$ for 12 months. DRP had the lower level of capsaicinoids (55.01 mg%) owing to the long drying time. After 12 months, SDRP capsaicinoid had decreased by 30-33%, compared with a decrease of 54% in DRP. Initial vitamin C contents were 721.48 and 955.25 mg% in DRP and SDRP, respectively, and, after 12 months, vitamin C loss in the SDRP group (37%) was less than that in fresh red pepper (FRP) samples (45%). Initial $\beta$-carotene content was greatest in the FRP group (259.82 mg%), and that of DRP decreased by 20% after 12 months. The color a/b value of SDRP (1.40) was greater than that of DRP (1.00).

• Food Science and Preservation
• /
• v.30 no.1
• /
• pp.88-97
• /
• 2023

As livestock consumption in Korea has been gradually increasing, the quality of the final products has been improved to meet this increased demand. In particular, maintaining the water holding capacity (WHC) and minimizing the drip loss during the thawing of frozen meat are of utmost importance. This study investigated the physicochemical properties of frozen pork subjected to thawing under different conditions: at room temperature (20℃, under air), at a low temperature (4℃ refrigerator, under air), under water (20℃, under water in a vacuum bag), under microwave (microwave-thawing, 260 W), and under low-pressure tumbling (20℃, 0.015 bar, tumbling). The shortest thawing time for frozen pork was recorded upon low-pressure tumbling thus indicating a fast heat transfer. The lowest drip loss (0.2%) and highest WHC (94.5%) were also recorded under this condition. A significantly higher drip loss was observed upon microwave- (1.0%) and water-thawing (1.2%), which resulted in the lowest WHC in microwave thawing (87.2%). The highest total count of aerobic bacteria and coliform group were observed upon room temp thawing while the low pressure tumbling and thawing resulted in the lowest aerobic bacteria (1.90 log CFU/g) and coliform (0.78 log CFU/g) count. Consequently, thawing by low pressure tumbling afforded the best food quality.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.258-258
• /
• 2013

최근 건조 제품의 양질화, 고급화 및 편의화가 요구되어 이를 충족시키기 위한 새로운 건조방법이 계속 개발 되어 왔다. 이러한 방법들 중에서 저온과 진공하에서 건조가 이루어지는 진공 동결 건조는 가장 완벽한 건조 방법으로 최근 실용화 되고 있다. 진공동결건조란 건조의 한 종류로 수분을 함유한 시료를 동결시킨 후 진공펌프를 이용하여 수증기압을 3중점 이하로 낮추어 얼음을 직접 증기로 만드는 승화의 원리에 의해서 얻어진다. 분무진공동결건조의 특징은 (1) 물리적구조의 보존성, (2) 화학적인 안정성, (3) 생물학적인 활동의 보존성, (4) 제품의 높은 복원성 및 재생성이다. 따라서 분무진공동결건조 기술은 크게 진공, 분무, 동결, 건조, 멸균 등과 같은 요소기술의 복합기술이라 할 수 있다. 분말을 제조하기 위해서 진공동결건조 후 분쇄하는 방법을 사용하나 본 방법에서는 정밀화학품 제조를 위해서 분무진공동결건조 방식을 사용한다. 이를 통하여 적당한 크기인 5~10 um의 입경 제조가 가능하고, 공기동력학적인 입경이 기존 방식에 비해 작아서 허파까지의 운반효율이 1.5~2배 우수하다. 화학, 의학 분야에서의 분무동결 건조는 주로 민감한 제품, 즉 생물학적 고유성의 손상 없이 물을 제거하는데 사용되어 영구적으로 저장 가능한 상태로 보관할 수 있으며 물의 첨가로 원상태로 복구할 수 있어서 매우 각광을 받고 있다. 의약용 냉동건조 제품은 항생물질, 박테리아, 혈청, 백신, 검사 약물, 단백질을 포함하는 생물공학 제품들, 세포, 섬유, 화학제품 등이 있으며 주로 vial 또는 ampule 상태로 건조가 이루어진다.본 연구에서는 원료를 $-194^{\circ}C$의 액체질소에 분무시켜 동결된 미립자를 형성한 후 진공 및 저온상태에서얼음의 승화(sublimation)에 기반한 1차 건조와 수증기 탈착(desorption)에 기초한 2차 건조 과정으로 구성된 분무진공동결건조기를 개발하였다. 분무동결 과정의 해석을 통해 2유체식 노즐을 통해 분무된 미세 입경의 액적이 액체 질소 표면까지 도달하는 회수률, 분무 노즐의 위치, 운전 조건 및 용기의 설계의 최적화를 수행하였다. 초기 액적속도, 분무노즐의 높이, 흡입구 추가에 따른 액적 유동 및 회수의 특성을 제시하였으며 이를 통한 분사시스템 고도화 가능성을 제시하였다. 구형의 미세 입자가 적층된 제품의 동결건조 공정의 해석은 흡착승화 모델(sorption sublimation model)을 기반으로 다음과 같은 열전달, 물질전달, 상변화 모델을 고려하여 유도되었다. 분무노즐 및 냉동/진공 배기계 시작품을 개발하여, 표면의 고다공도를 갖춘 입경 3~20 m 정도의 시료를 얻을 수 있으며, 동역학적 입경 5 m 충족함을 확인하였다.

• Journal of Plant Biotechnology
• /
• v.49 no.3
• /
• pp.187-192
• /
• 2022

The repeated monthly or weekly subculture of plant callus is labor intensive and increases the risk of somaclonal variation from the parental callus line. The most effective method for preserving plant callus is cryopreservation, which involves storage in liquid nitrogen. However, this method cannot be applied to the callus of different plant species in the same manner, so it is difficult to develop a standardized cryopreservation method. In addition, the survival rate of the frozen callus after thawing and the regeneration rate after survival are uncertain. Therefore, it is necessary to develop a method to extend the subculture interval of plant callus in an active state. In this study, active plant calli of various species without freezing was incubated at 15℃ for 4 to 12 weeks without subculture. After 12 weeks, 8 lines of plant callus grew less than 2-fold when cultured at 25℃, but at least 2 times as much when cultured at 15℃. Moreover, total antioxidant activity did not differ significantly between plant callus recovered at 25℃ after culturing at 15℃ or at 25℃. These results show that the subculture interval can be extended at a temperature of 15℃ without need for modified medium composition or additional processes. In addition, positive results in all calli of several plant species are expected to reduce labor as well as somaclonal variation by increasing the subculture.

• Food Science and Preservation
• /
• v.24 no.2
• /
• pp.230-236
• /
• 2017

This study was carried out to investigate the effects of ultrasonic thawing on physicochemical characteristics of frozen pork sirloin. To determine the velocity of an ultrasonic thawing machine, $-80^{\circ}C$ frozen pork sirloins were thawed using 132, 580, and 1,000 kHz ultrasonic thawing machines, and the physicochemical properties of pork sirloin thawed with $15^{\circ}C$ tap water and those using the ultrasonic thawing machines were compared. As a result, thawing speed by ultrasonic thawing was three times faster than that of tap water, but drip weight loss rate is increased by about 5% during ultrasonic thawing compared to that during thawing in tap water. However, biochemical properties, such as pH, volatile basic nitrogen, thiobarbituric acid, and total aerobic bacteria, were not improved by ultrasonic thawing. Hunter values, such as total color change and redness, improved slightly after 580 kHz ultrasonic thawing. The hardness and chewiness of the pork sirloin decreased significantly after 580 kHz ultrasonic thawing; however, springiness was not changed. These results indicate that ultrasonic thawing is faster than thawing in tap water, but the physicochemical characteristics of frozen pork sirloin was not significantly improve by ultrasonic sound.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.26 no.2
• /
• pp.133-140
• /
• 1993

In order to obtain the fundamental factors influencing on gelation of Alaska pollack meat paste during processing, the interactions among hydrophobic residues, disulfide bonds and gel strength were investigated. Hydrophobic interactions between actomyosin molecules were strengthened when the temperature was raised from $5^{\circ}C\;to\;65^{\circ}C$, especially between the range from $25^{\circ}C\;to\;35^{\circ}C$. Total SH groups were decreased at the higher heating temperature and the severe decreasing occurred from $45^{\circ}C$. However the amounts of free SH groups were increased significantly over $45^{\circ}C$.

• Journal of Food Hygiene and Safety
• /
• v.3 no.1
• /
• pp.19-26
• /
• 1988

Most of meat spoilage bacteria area Gram negative, which are very sensitive to freezing ; for instance , 90% of E. coli cells are killed or sub-lethally injured by freezing at -3$0^{\circ}C$, and the freeze-injury rate is dependent upon freezing rate. Since the injured bacterial cells are sensitive to selective agents, they fail to multiply in selective media. Injured bacterial cells are, however, capable of spontaneous repair at appropriate environmental and nutritional conditions . Enumeration of injured bacterial cells involves artificial induction of repair at these conditions. Cubic beef samples(3$\times$3$\times$3cm) were frozen at -6$0^{\circ}C$, -4$0^{\circ}C$, or -18$^{\circ}C$. The samples frozen at each temperature were thawed at 4$^{\circ}C$, 2$0^{\circ}C$, or by microwave . After these respective freezing an thawing treatments, the percentage of sub-lethally injured total coliforms out of total surviving ones was measured and compared. The results were as follows: 1. The interaction between freezing and thawing on injury rate was not significant. 2. The injury rates(as means of all three thawing treatments post-freezing) by freezing at -6$0^{\circ}C$, -4$0^{\circ}C$, or -18$^{\circ}C$ were 32.2$^{\circ}C$ and 19.2$^{\circ}C$ respectively . 3. The injury rates(as means of all three freezing treatments)by thawing at 4$^{\circ}C$, 2$0^{\circ}C$, or by microwave were 49.3%, 11.7% and 21.0% respectively. The highest injury rate was caused by freezing at -6$0^{\circ}C$ and subsequent thawing at 4$^{\circ}C$. However since the injury rates by freezing treatment were not significantly different, freezing at -18$^{\circ}C$ and subsequent thawing at 4$^{\circ}C$ can also be recommended , from an economic perspective.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.615-624
• /
• 2014

The fin-tube heat exchanger being used for industrial boiler, radiator, refrigerator has been conducted in various studies to improve it's performance. In this study, the characteristics of heat transfer and pressure drop was theoretically analyzed according to longitudinal pitch, location of vortex generator, bump phase and number of the tube surface about the plain fin-tube heat exchanger. The boundary condition for the CFD (Computational Fluid Dynamics) analysis applied with the SST (Shear Stress Transport) turbulence model assumed as the tube surface temperature of 333 K, the inlet air temperature of 423-438 K and the inlet air velocity of 1.5~2.1 m/s. The analysis results indicated that the heat transfer coefficient is not affected highly by the longitudinal pitch, and the heat transfer characteristics was more favorable when the vortex generator was located in front of the tube. Also the bump phase of the tube surface indicated that circle type was more appropriate than serrated type and triangle type in the characteristics of heat transfer and pressure drop, and the sixteen's bump phase of circle type was most favorable.

• Food Science of Animal Resources
• /
• v.22 no.4
• /
• pp.316-321
• /
• 2002

Fresh ground pork was irradiated with the electron beam, and the microbiological and oxidative stability of ground pork was examined during refrigerated and frozen storage. During both storage, with the increase in the irradiation dose from 0 to 3.0 kGy, the inhibition effect of the growth of the total aerobic bacteria and the mesophiles also increased. Psychrotrophic bacteria were not detected at all in the whole experiment. On the other hand, electron beam irradiation promoted the oxidative rancidity of ground pork during refrigerated and frozen storage. The catalytic effect of oxidation was more pronounced with the electron beam dose of 3.0 than that of 1.5 kGy. As a result, the control of lipid oxidation must be achieved to fully utilize the sterilization effect of electron beam in the ground pork.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.5
• /
• pp.577-582
• /
• 2015

This paper is the fundamental study for the application of cold storage system to the transportation equipment by sea and land. This numerical study presents the solid-liquid phase change phenomenon of calcium chloride solution of 30wt %. The governing equations are 1-dimensional unsteady state heat transfer equations of $1^{st}$ order partial differential equations. This type of latent heat storage material is often usable in fishery vessel for controlling the temperature of container with constant condition. The governing equation was discretized with finite difference method and the program was composed with Mathcad program. The main parameters of this solution were the initial temperature of heat storage material, ambient temperature of cold air and the velocity of cold air. The data of boundary layer thickness becomes thin with the increasing of cold air flowing velocity and also the heat storage completion time become shorten.