• 에너지공학
• /
• 제14권2호
• /
• pp.159-166
• /
• 2005

국내에서 폐플라스틱 발생량은 증가하고 있지만 이에 대한 처리방법 및 재활용은 부족한 실정이다. 하지만 최근에 플라스틱과 같은 고분자물질의 처리 방법으로 열분해기술에 대한 관심이 증가하고 있다. 본 연구에서는 혼합폐플라스틱의 처리 및 생성되는 재생유의 이용가능성을 평가하기위해 폐플라스틱의 각 재질별 TGA와 DCS분석을 통한 열분해특성 파악과 재생유의 품질검사 및 성상분석을 통한 이용가능성을 평가하였다. 온도변화에 대한 재질별 플라스틱의 열분해는 PP, LDPE, HDPE, PET, PS,기타 순으로 이루어짐을 확인할 수 있었다. 이러한 각 재질별 플라스틱의 열분해 특성을 기초로 하여 혼합폐플라스틱의 열분해처리 조건을 설정하였고, Batch식 열분해 플랜트를 가동하며 혼합폐플라스틱을 처리하였다. 열분해 처리시 발생되는 가연성가스를 포집, 냉각 및 정제과정을 거쳐 오일을 생산하고, 시중에서 판매되고 있는 연료유와 재생유를 한국산업규격의 석유품질검사법에 준하여 분석하였다. 재생유의 품질은 낮은 인화점을 제외하고는 모두 품질기준에 적합한 것으로 분석되었고, 연료유와의 성상을 비교한 결과 등유와 경유 중간의 성상을 나타내었다. 따라서 혼합폐플라스틱을 열분해 처리해 생성된 오일은 연료유로 이용이 가능하므로 신재생에너지로 활용이 충분할 것으로 확인되었다.

• 한국생산제조학회지
• /
• 제8권4호
• /
• pp.68-78
• /
• 1999

Heat transfer performance is studied for boiling and condensation of R-11 on integral-fin tubes. Nine tubes with trapezoidal integral-fins having fin densities from 748 to 1654fpm and 10,30 grooves and finned tubes with caves of 0.55 and 0.64 mm height respectively are tested. in case of condensation CFC-11 condensates at saturation stat of 32$^{\circ}C$ on the outside surface cooled by inside cooling water flows. And in case of boiling the refrigerant evaporates at a saturation state of 1 bar on the outside tube surface and heat is supplied by hot water which circulates inside of the tube,. The tube having fin transfer coefficient concerns fin tubes with caves show higher valve than low fin tube having find density of 1299fpm and 30grooves. The overall heat transfer coefficient of fin tube with caves is about 5155 W/mK at 2.8m/s of water velocity, The value is abuot 2.7 times higher than plain tube and 1.3 times higher than low fin tube having fin density of 1299fpm and 30 grooves.

• 한국생산제조학회지
• /
• 제8권4호
• /
• pp.65-65
• /
• 1999

Heat transfer performance is studied for boiling and condensation of R-11 on integral-fin tubes. Nine tubes with trapezoidal integral-fins having fin densities from 748 to 1654fpm and 10,30 grooves and finned tubes with caves of 0.55 and 0.64 mm height respectively are tested. in case of condensation CFC-11 condensates at saturation stat of 32℃ on the outside surface cooled by inside cooling water flows. And in case of boiling the refrigerant evaporates at a saturation state of 1 bar on the outside tube surface and heat is supplied by hot water which circulates inside of the tube,. The tube having fin transfer coefficient concerns fin tubes with caves show higher valve than low fin tube having find density of 1299fpm and 30grooves. The overall heat transfer coefficient of fin tube with caves is about 5155 W/mK at 2.8m/s of water velocity, The value is abuot 2.7 times higher than plain tube and 1.3 times higher than low fin tube having fin density of 1299fpm and 30 grooves.

• 대한기계학회논문집A
• /
• 제24권1호
• /
• pp.29-37
• /
• 2000

The effect of a ceramic ball inclusion on densification behavior of a metal powder compact was investigated under cold isostatic pressing, pressureless sintering and hot isostatic pressing. To simulate those processes, proper constitutive models were implemented into a finite element program (ABAQUS). Measured density distributions of metal powder compacts were also compared with finite element results and showed the same trend with simulated results. Residual stress distributions were calculated by finite element analysis to study the effect of ceramic ball inclusions with different thermal expansion coefficients. The higher residual stress was observed in a metal powder compact when the difference between thermal expansion coefficients for a ceramic ball and metal powder became larger. Samples produced by Wing showed more uniform density distributions and lower residual stresses compared to those by sintering after cold isostatic pressing. For various sizes of ceramic ball inclusions, densification and deformation of powder compacts were also studied during hot isostatic pressing.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.433-439
• /
• 2001

An experimental study was carried out on the characteristics of the mixed-convection heat transfer from a protruding heat source module which had uniform heat flux and was located on a flat plate in the inclined channel. The effects of the inclined channel(${\varphi}=0{\sim}90^{\circ}$) was studied for the input power($Q=3,\;7W$) and inlet air velocities($V_{i}=0.1{\sim}0.9m/s$). Experimental results indicate that the input power was most effective parameter on the temperature differences between inlet air and module. The effects of the inclined angle was negligible when the inlet velocities were above 0.5m/s and 0.9m/s at Q = 3W, 7W respectively. As the inclined angle of the channel increases, the temperatures of the module are decreased. So we obtained the best condition on the adiabatic board at the vertical channel.

• 설비공학논문집
• /
• 제16권5호
• /
• pp.467-474
• /
• 2004

This paper presents the results of an experimental investigation for the effect of radiant heat on the evaporation cooling of water droplet in the process of fire extinguishing. The experiments are mainly focused on the surface temperature, the surface roughness and the droplet diameter. The range of surface temperature is T$_{s}$ =80－14$0^{\circ}C$, surface roughness is R$_{a}$=0.08－0.64 ${\mu}{\textrm}{m}$ and the droplet diameter is $\Phi$=3.0 mm in the radiation. The results show that the evaporation time is shorter for the larger surface roughness and the volume of droplet increased when the surface roughness is 0.64 ${\mu}{\textrm}{m}$ at the surface temperature 127$^{\circ}C$. When the surface roughness is 0.64 ${\mu}{\textrm}{m}$, the heat flux is larger than the surface roughness is 0.08 ${\mu}{\textrm}{m}$ at the surface temperature 81$^{\circ}C$.>.>.

• 대한기계학회논문집B
• /
• 제21권1호
• /
• pp.15-23
• /
• 1997

An experimental investigation of two-dimensional steady natural convection cooling in a vertical open top cavity with conducting side walls of finite thickness is presented. The various heat-generating discrete heaters are located on one vertical wall of the cavity. When each heater dissipates different amount of power, the purpose of the work is to obtain the optimal array condition of the heaters. The four cases of non-uniform heating conditions are considered. The temperature fields in the cavity were visualized by the interferometer and local temperatures of the vertical wall were measured by thermocouples. The heaters were arranged in two configurations: flush-mounted on a vertical wall or protruding from the wall about 4.5 mm. The vertical wall was constructed out of copper or epoxy-resin sheet. Experiments have been conducted for air with constant Prandtl number(Pr=0.7), the aspect ratio of 4.6, 7.5, 9.5, power input in the range of 0.9 W ~ 4.2 W. For the enhancement of the cooling effectiveness, the upper and lower of vertical wall would give the better position for the heaters of higher heat flux.

• 대한기계학회논문집B
• /
• 제38권7호
• /
• pp.557-570
• /
• 2014

본 연구에서는 삼차원 RANS 방정식을 이용하여 냉각 유로 내에 부착하는 새로운 핀휜의 다양한 부채꼴 형상에 대해 열전달, 압력강하, 열성능을 평가하였다. 레이놀즈수가 5,000부터 100,000인 경우에 대하여 수치해석을 수행하였으며, 난류모델로는 Low-Re SST 모델을 사용하였다. 수치해석의 정당성을 확보하기 위하여 실험과 동일한 조건에서 면적 평균 누셀트수에 대한 실험값과 계산값을 비교하였다. 앞전 각도와 뒷전 각도를 매개변수로 하여 세 종류의 부채꼴 핀휜의 형상 변화에 따른 열성능을 평가하였다.

• 전기학회논문지P
• /
• 제64권4호
• /
• pp.236-240
• /
• 2015

Natural ester has a higher biodegradability, flash and fire points, and a greater permittivity compared to conventional mineral oils. However, natural ester also has a higher pour point, viscosity, and water content. These characteristics hamper circulation and the electrical properties of oil-filled transformer. Thus, this paper applied electromagnetic-thermal-flow coupled analysis method to predict temperature distribution inside 154kV single phase power transformer using natural ester. It modeled in the actual appearance for the tank and winding of the power transformer to improve the accuracy of analysis and applied heat flow analysis that considered hydromechanics and heat transfer at the same time. It calculated the power loss, the main cause of temperature rise, from winding and core with electromagnetic analysis then used for the heat source for the heat flow analysis. It then compared the reasonability of result of measurement analysis based on the result acquired from temperature rise test using FBG sensor on the power transformer.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전력기술부문
• /
• pp.397-399
• /
• 2008

발 변전설비 중 중요한 설비의 하나로 손꼽히는 변압기는 운전 중 신뢰성 확보가 관건이라 할 수 있다. 최근 안정적 전력공급에 대한 요구가 증대됨에 따라 변압기 이상진단 기술지원 요청이 매년 증가하고 있으며, 특히 절연과 냉각작용이 주기능인 전기절연유의 자체 품질관리는 변압기 예방진단을 위해 시행하고 있는 유중가스분석 못지않게 중요하다. 이에 전력연구원에서는 1999년 전산가 간이측정 기구를 개발하여 별도의 분석의뢰 없이 현장에서 바로 측정하여 절연유의 품질관리에 적용할 수 있도록 한 바 있다. 본 논문은 2008년 1월부터 4개월간 12개 전력관리처에 배분하여 66kV이상 급 모든 변압기의 전산가 현장측정을 완료하고 이에 대한 적용결과와 현장적용성을 검토하였다.