• Journal of Power System Engineering
• /
• v.16 no.4
• /
• pp.17-23
• /
• 2012

In this study, the numerical simulation and basin model test have been performed to evaluate sea worthiness and resistance performance for a small pre-planning three type of leisure boats which are U, V, Y shapes of hull forms. As a well known commercial CFD code, Maxsurf, was applied for modeling hull forms used as the solver of motion analysis. Also the model resistance test was carried out to estimate the effective power of boat in the basin tank. Numerical simulation and model test results show that Y-shaped hull is better than the other types in terms of heave and pitch motion, having a key effect on a boat sea worthiness. But V-type hull is more efficiency than others cases in resistance performance.

• Journal of Navigation and Port Research
• /
• v.34 no.5
• /
• pp.319-324
• /
• 2010

For the purpose of technological analysis in the marine accidents and their prevention, IMO have made it obligatory to load VDR which is similar to the black box in aircraft. However, in case of body sinkage, capsizing, stranding and plunging which are almost 10% of marine accidents, it is difficult to take out the necessary data from the VDR in order to analyze the cause of them. Therefore, this paper apply the navigation dangerousness evaluation technology to the VDR to improve its performance. And we suggest that the vertical acceleration which is one of the factors for evaluating seakeeping performance of a ship is to be added in the existing VDR record data recommended by IMO.

• Computational Structural Engineering
• /
• v.10 no.3
• /
• pp.67-73
• /
• 1997

CFD 연구를 초고속선 선형개발에 활용한다면 선체주위의 유동장 계산결과로부터 압력 및 속도, 자유표면 파고분포 등 초고속선의 설계 및 기본계획 단계에서 필요한 저항 및 추진성능 자료를 얻을 수 있다. 이러한 기능을 더욱 개선 발전시키면 선형개발에 더 많은 적용이 예상된다. 또한 항주 시간에 따른 초고속선의 운동특성을 고려할 수 있게 된다면 앞으로 항주자세제어 및 내항성능과 승선감의 추정도 CFD 연구를 통해서 가능하리라 믿는다. 이제 국내 조선소를 중심으로, 21세기에 도래할 것으로 예측되는 고속 해상수송 수단에 대한 수요에 대응하고 조선기술의 우위확보를 위해 고부가가치, 고성능이 요구되는 초고속선 기술개발에 연구를 집중해야겠다.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.17 no.4
• /
• pp.39-45
• /
• 1980

내항성이 우수한 선형을 개발하기 위해서는 초기설계단계에서 이미 그 배의 해상에서의 거동을 예측할 수 있어야만 한다. 이 보고서에서는 임의의 입사각을 갖는 규칙파중을 항주하는 선박이 겪게 되는 동요중에서 횡동요, 수평동요 그리고 선수동요의 연성운동방정식의 해를 Tassi-Takaki가 수정한 스트립이론을 적용하여 해석하였다. 제15차 ITTC의 내항성 위원회의 보고서에서 발표된 콘테이너선형에 대한 결과와 똑같이 선형에 대해 본 프로그램을 사용하여 계산한 수평동요, 횡동요 그리고 선수동요의 운동응답을 비교하여 보았으며, 상당히 만족스러운 결과를 얻었다.

• Journal of the Society of Naval Architects of Korea
• /
• v.61 no.2
• /
• pp.77-87
• /
• 2024

In the present study, seakeeping performance for an amphibious vehicle in regular head waves was analyzed and evaluated experimentally and numerically. First, seakeeping tests were performed to confirm the vehicle's motion response of heave, pitch motion and vertical acceleration in restricted wavelength ratio conditions for a simplified vehicle shape. Numerical analyses were also conducted for a simplified vehicle shape to validate the numerical solver. To simulate the vehicle's motions, multi-degrees of freedom were calculated by a dynamic fluid-body interaction solver in STAR-CCM+. Comparison between numerical and experimental results was carried out for a simplified vehicle shape. Numerical results are in good agreement with experimental results. Second, numerical analyses were performed for a detailed vehicle shape considering seaway wavelength conditions. The seakeeping performance for an amphibious vehicle was evaluated by comparing with the existing ship's seakeeping performance standards.

• Journal of Korea Ship Safrty Technology Authority
• /
• v.6
• /
• pp.29-39
• /
• 2001

본 논문에서는 차세대 고속선에 적합한 선형의 하나로 거론되고 있는 삼동선의 개발 현황을 살펴보고, 실선으로의 가능성을 파악하기 위하여 적용 대상선을 2,500톤급 삼동형 함정으로 설정하여 개념설계를 수행한 결과를 보이고자 한다. 함정의 설계조건과 요구사항에 적합하도록 삼동선의 장점을 최대한 반영하여 초기 개념 설계를 수행하였으며, 이로부터 도출된 삼동선형의 유체역학적인 성능검토를 위해 저항추진, 내항 및 조종성능에 대한 연구를 수행하고 그 결과를 유사 단동선과 비교, 검토하였다. 연구결과의 가시화를 위하여 최종적으로 3차원 컴퓨터 그래픽 모델링하고, 실선의 1/100 축적모형을 제작하여 설계결과를 표현하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.61-70
• /
• 2004

This paper treats optimal route assessment system at seaway based on weather forecasting and wave measurement through observation. Since early times. captain & officer have been sailing to select the optimum route considering the weather ana ship status condition empirically. However. it is rare to find digitalized onboard route support system whereas weather fax or wave and swell chart are utilized for the officer. based on officer's experience. In this paper, optimal route assessment system which is composed of voyage efficiency and safety component is introduced. Optimum route minimized ETA (estimated time of arrival) ana fuel consumption is evaluated for efficient voyage considering speed loss and power increase based on wave added resistance of ship. In the view point of safety, seakeeping prediction is performed based on 3 dimensional panel method. Basically. the weather forecast is assumed to be prepared previously in order to operate this system.

• Journal of Navigation and Port Research
• /
• v.28 no.10 s.96
• /
• pp.833-841
• /
• 2004

This paper treats optimal route assessment system at seaway based on weather forecasting and wave measurement through observation Since early times, captain & officer have been sailing to select the optimum route considering the weather and ship status condition empirically. However, it is rare to find digitalized onboard route support system whereas weather fax or wave and swell chart are utilized for the officer, based on officer's experience. In this paper, optimal route assessment system which is composed of voyage efficiency and safety component is introduced. Optimum route minimized ETA(estimated time of arrival) and fuel consumption is evaluated for efficient voyage considering speed loss and power increase based on wave added resistance of ship. In the view point of safety, seakeeping prediction is performed based on 3 dimensional panel method. Basically, the weather forecast is assumed to be prepared previously in order to operate this system.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.5
• /
• pp.439-445
• /
• 2012

Only the sand carriers fitted with hopper doors can remove their hatch covers in current regulations. However, there is no sand carriers fitted with hopper doors in korea. Through the analysis of accidents, inspection of equipment installed on ships, and evaluation of stability and seakeeping performance concerning the sand carriers, it is expected that the current exemption requirement is modified for hatch covers for sand carriers. As the result, this paper proposed the removal of hatch covers and be fitted by tarpaulin instead to protect water ingress into the holds. This can be done by making the holds smaller designed to be filled full until the top of the hold without exceeding loadline. Also, the bilge pumps should have the sufficient capacity of pumping water out in the early stage of sand-water mixture to wetted condition in approximately 1 hour and be operationally ready in every voyage conditions.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.2 s.29
• /
• pp.133-140
• /
• 2007

Since early times, captain have been sailing to select the optimum route considering the weather, ship loading status condition and operational scheduling empirically. However, it is rare to find digitalized onboard route support system whereas weather facsimile or wave and swell chart are utilized for the officer, based on captain's experience. In this paper, optimal route safety assessment system which is composed of voyage efficiency and safety component is introduced. Optimum route minimizea ETA(estimated time of arrival) and fuel consumption that shipping company and captain are requiring to evaluate for efficient voyage considering speed loss and power increase based on wave added resistance of ship. In the view point of safety, seakeeping prediction is performed based on 3 dimensional panel method. Finally, It is assistance measure for ship's optimum navigation route safety planning & assessment.