• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.381-386
• /
• 2004

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.182-184
• /
• 2008

수소리니어 동력/발전시스템은 기존의 인프라를 이용한 개발이 가능한 이점과 고압축비, 초회박연소 실현에 의한 고효율, 저배기 달성이 가능한 장점을 가지고 있다. 또한 엔진 혹은 발전기의 구조변경 없이 다양한 연료를 사용이 가능하기 때문에 차세대 수소이용 기관으로 연구가 이루어지고 있다. 본 연구에서는 기존에 설계한 5kW급 리니어발전기의 성능향상을 위해 공극구조의 개선과 디텐트력 감소 설계를 했다. SPM 타입의 자석을 적용한 내충격 구조의 이동자 설계과 디텐트력 감소를 위한 치 형상설계가 이루어졌다.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.6
• /
• pp.715-726
• /
• 2023

This study suggested that protective panels should be installed as sacrificial members as a safety design method for structures with potential explosions such as hydrogen charging stations to minimize direct damage to the structure and have resilience. To this end, the focus of the experiment is on quantitatively evaluating the impact of the structure when the protection panel is installed closely or spaced apart from the structure in a high-speed collision situation of the projectile. The experimental design used steel plates instead of concrete structural members mainly used in the past for excellent reproducibility, and the impact of structural members was compared and analyzed through deformation differences on the back of the steel plate. In addition, the impact of changes in the physical properties of the elastic body used as a separation material for the protective member and the difference in shock wave transmission time according to the protective member and the elastic body on the structural member was investigated.

• Computational Structural Engineering
• /
• v.10 no.3
• /
• pp.39-45
• /
• 1997

최근 우리 주변에는 기계, 구조물의 고속화 및 대형화에 따른 충격하중의 발생빈도가 급격하게 증가하고 있다. 따라서 이와 같은 충격하중을 받는 기계 및 구조물의 안전성 및 신뢰성 확보를 위하여는 먼저 충격하중 특성을 고려한 내충격 설계기법의 확립이 필요하다. 특히 충격하중의 경우 종래의 파괴역학적 관점에서 주로 다루어 왔던 정적하중 및 피로하중 하에서의 재료거동 특성과 달리 응력파의 전파특성이 재료의 충격강도 및 균열발생, 전파특성에 큰 영향을 미치기 때문에 이를 고려한 역학적 검토가 필요하다. 한편 이와 같은 충격하중이 반복적으로 작용하는 충격피로의 경우 지금까지 많은 연구로 내피로 설계기법이 확립된 일반 피로 특성과 달리 아직 그 주요 메카니즘이 규명되지 않은 부분이 많아 이 부분에 대한 체계적인 연구가 국내에서도 요구된다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.10a
• /
• pp.140-141
• /
• 2014

최근 대용량 고속 컴퓨터의 출현과 고도 비선형 동적 해석 소프트웨어가 개발됨에 따라 안전사고 규명와 안전설계 등에 고도 정밀 Modeling & Simulation(M&S) 시스템이 널리 적용되고 있다. 특히 해양안전은 천배의 밀도를 갖는 해양에서의 내충돌 및 내충격 응답을 실선규모로 규명 분석하여야 할 것이다. 이를 위해서는 고도 정밀 M&S 시스템에 유체-구조 연성(Fluid-Structure Interaction, FSI) 해석기법을 적용하여야 보다 정확하고 합리적인 안전성을 평가할 수 있다. 여기서는 이러한 고도 정밀 M&S 시스템을 적용한 해양안전기술의 적용 분야를 소개하고자 한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.489-493
• /
• 2005

TFT-LCD(Thin Film Transistor Liquid Crystal Display) module is representative commercial product of FPD(Flat Panel Display). Thickness of TFT-LCD module is very thin. It is adopted for major display unit for IT devices such as Cellular Phone, Camcorder, Digital camera and etc. Due to the harsh user environment of mobile IT devices, it requires complicated structure and tight assembly. And user requirements for the mechanical functionalities of TFT-LCD module become more strict. However, TFT-LCD module is normally weak to high level transient mechanical shock. Since it uses thin crystallized panel. Therefore, anti-shock performance is classified as one of the most important design specifications. Traditionally, the product reliability against mechanical shock is confirmed by empirical method in the design-prototype-drop/impact testredesign paradigm. The method is time-consuming and expensive process. It lacks scientific insight and quantitative evaluation. In this article, a systematic design evaluation of TFT-LCD module for mobile IT devices is presented with combinations of FEA and testing to support the optimal shock proof display design procedure.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.05a
• /
• pp.98-103
• /
• 2002

In this paper, shock analysis was performed for coarse and fine mesh model using MSC/NASTRAN and ANSYS after substituting the foundation of deck mounted equipment of marine ship for mass-spring system. In order to determine input file in MSC/NASTRAN, dynamic response analysis was also performed using DDAM based on the calculation in the range of low frequency. It was confirmed that the coarse mesh model has the sufficient effective weight in a lower degree mode compared to fine mesh model.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.102-107
• /
• 2012

In this study, the design procedure of hybrid active mount by an electro-magnetic actuator is proposed to reduce the transmitted force from naval shipboard equipment to ship hull structure. The hybrid type mount which is composed of a passive rubber element and an electro-magnetic actuator is introduced and, through the vibration measurement for the objective pump system, the required force of the actuator is computed and discussed in detail. The initial designs were supposed for three types, one is moving coil type actuator and the others are moving permanent magnet type actuators. Based on the initial design concept, the final designs considering shock resistance and interference with mover and stator are proposed and examined.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.1
• /
• pp.111-116
• /
• 2001

A practical scheme to reduce failure of the PCB(Printed Circuit Board) of a monitor is introduced using deformed mode shape under mechanical shock. When the monitor is given critical shock loads, cracks are commonly initiated at the tip of a hole on the PCB. Accordingly, a deformed mode shape of the PCB is obtained using a FEM code to define a weak point on the PCB under mechanical shock, and then the position and direction of the hole is determined to prevent the failure at the critical mode shape. Also, the stress intensity factor around the weak point on the PCB is calculated to check the possibility of fracture by normal tensile stress. In conclusion, present research is useful to assist the practical design of components-layout on the PCB.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.5
• /
• pp.273-280
• /
• 2011

In this paper, we describe the structural reinforcement approach of the throwing-type firefighter assistance robot which can be thrown into a fire site to monitor inside the place and search trapped people while ensuring a firefighter's safety. The reinforcement design is focused on high strength with low weight for the robot. The in-depth structural analysis of the platform is carried out to track down the weakest part, especially with the 1.8m height of drop test. The analysis is verified by comparing with the 1.8m height of the drop test of the throwing-type firefighter assistance robot. The optimal approach for improving the strength of the weakest part aims at topological equivalent and equivalently stress distributed shape.