• Journal of environmental and Sanitary engineering
• /
• v.16 no.4
• /
• pp.47-54
• /
• 2001

흡착된 유기물들의 생물막상에서 오존효과(오존에 의한 생물학적 분해능)를 관찰하기 위해 파 일롯 실험이 수행되었다. 유입원수 내 용존유기물들 중에는 THM전구물질이 존재하고 염소화 정 수과정에서 생성된 THM은 원수내 염소의 양이 2배에서 5배로 증가될수록 THM중 클로로포름은 5배에서 10배 가량 증가되고 디브로모클로라이드는 5배 가량 증가된다. 이러한 THM은 활성탄에 흡착되고 생물학적 분해에 의해 제거된다는 사실이 발견되었다. 특히 암모니아성 질소는 활성탄 에서보다 생물활성탄에서 40% 가량 생물학적 제거능이 증가된다는 활성탄내부의 생분해성이 발 견되었다. 또한 본 연구의 대상인 THb7에서도 활성탄에서 보다 생물활성탄에서 미생물분해효과에 의해 제거효율이 20% 이상 증가하는 것으로 나타났다.

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2001.06a
• /
• pp.167-170
• /
• 2001

대기오염 물질 중에는 아황산가스(SO$_2$), 산화질소(NOx), 불화수소(HF), 탄화수소(HC), 오존 (O$_3$)등 여러 가지 종류가 있으나 이러한 대부분의 대기오염 물질들은 식물체내에 흡수되어 세포내에서 활성산소(activated oxygen)를 발생시키게 되는데 이때 발생되는 활성산소에는 superoxide radicals(O$_2$), 과산화수소($H_2O$$_2$), 수산기(OH$^{-}$) 및 singlet oxygen(O$_2$) 등으로 생리적, 생화학적 과정 및 세포내의 구조조직에 부정적인 영향을 미치게되어 식물의 생장을 감소시킨다.(중략)

• Elastomers and Composites
• /
• v.12 no.1
• /
• pp.55-64
• /
• 1977

ethylene과 methylacrylate 그리고 가교(架橋) 영향(影響)을 미치는 Carboxyl 기(基)로 구성(構成)되어 있는 이 공중합체(共重合體)는 내열(耐熱) 그리고 내유성(耐油性)인 새로운 등급(等級)의 탄성체(彈性體로) 상품화(商品化) 되었다. 이 탄성체(彈性體)의 가황물(加黃物)은 Chlorosulfonated Polyethylene과 실리콘고무 중간(中間)인 고온(高溫)에서 물리적(物理的) 특성(特性)을 만족(滿足)시켜주는 고무로써 특(特)히 내유(耐油), 내(耐)오존성(性) 그리고 내후성(耐侯性)에 우수하며 동시(同時)에 저온(低溫)에서도 훌륭한 성질(性質)을 유지(維持)하는 탄성체(彈性體)이다.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.361-364
• /
• 2002

BAC (biological activated carbon) process is a combination of biodegradation and active carbon adsorption. Pre-ozonation of raw water increased in biodegradable organic fraction. This study is to investigate the enhancement of dissolved organic matter removals by pre-ozonation process combined with BAC process at a semi-pilot scale. By biodegradation improvement in pre-ozonation process. the charge of adsorption was reduced and the life of biological activated carbon is extended. And, 48 % of total DOC was remove in the upper compartment of BAC column. The removal of the nitrogen-ammonia shows a considerably high removal ratio with 75.9 %.

• Elastomers and Composites
• /
• v.45 no.1
• /
• pp.44-50
• /
• 2010

The butadiene rubber(BR) blends with chloroprene rubber(CR) were prepared by mechanical mixing method. Cure characteristics, mechanical properties, ozone resistance properties and dynamic mechanical properties were subsequently examined. The properties of ozone resistance of pure BR was significantly improved through blending with 50 wt% CR. Dynamic characteristics determined from a Rheovibron generally showed two glass transition($T_g$) for the entire blends, $tan{\delta}$ peak monotonically shifted toward the higher temperature with the increasing content of CR. Optimum cure time of compound was significantly lengthened with loading of CR.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.6
• /
• pp.601-608
• /
• 2008

The objective of this study was to evaluate the effect of ozonation as pretreatment on the removal of dissolved or biodegradable organic matter(DOM or BOM), the variance of DOM fractionation, and microbial regrowth by pilot-scale granular activated carbon processes in which adsorption and biodegradability was proceeding due to long time operation. Regardless of point of ozonation applied, GAC processes with ozonation(i.e., Ozonation combined with GAC Filter-adsorber; Pre O$_3$ + F/A, Ozonation combined with GAC adsorber; Post O$_3$ + GAC) compared with GAC processes without ozonation(i.e., GAC Filter-adsorber; F/A, GAC adsorber; GAC) removed approximately 10 to 20% more of DOC, hydrophilic DOM(HPI), BDOC and AOC after long period of operation that biological activity was assumed to happen. Ozonation was not found to have a significant effect on the removal of DOC, but caused the decrease of AOC by approximately 20%. It was found that the fixed bacterial biomass on GAC media did not show a significant difference between the GAC with ozonation and GAC without ozonation as pre-treatment, whereas the HPC of column effluent was more biostable at Post O$_3$ + GAC compared with F/A or GAC.

• Applied Chemistry for Engineering
• /
• v.5 no.2
• /
• pp.215-222
• /
• 1994

As a toughness modifier for plastics chlorosulfonated polyethylene(CSM) can be used. CSM has a good resistance to oxygen and ozone. CSM has a crosslinkable functional group(sulfonyl chorid) with sulfur and metal oxide. Polyvinylchloride(PVC) is widely used industrial plastics because of its balanced properties and low cost. But it has some disadvantages such as low impact strength, light, ozone and oxygen degradation. In order to improve these properties of PVC, CSM was blended with PVC. The toughening effect appeared at about 10wt% and there is no additional effect above 30wt% of CSM. The weatherability, ozone resistance and mechanical properties of PVC were improved by blending with CSM. The toughening mechanism is studied by SEM.

• Journal of Korea Soil Environment Society
• /
• v.4 no.3
• /
• pp.3-15
• /
• 1999

This paper includes the basic experimental results performed for developing an innovative and technologically feasible process wherein gaseous ozone, a powerful oxidant. is injected directly into vadose zone by which in-situ chemical degradation of semi- or, non-volatile petroleum product such as diesel fuel is derived. As ozone gas injected continuously(50mL/min, 119.0$\pm$6.1mg/L) into soil packed columns artificially contaminated with diesel fuel(initial concentration 1,485mg-DRO/kg/soil), the removal rates at the inlet and outlet point of 14hrs-operated column are 87.9% and 100.0%, respectively. On the other hand, soil vapor extraction system showed less than 30% of removal rates of residual diesel both at the inlet and outlet samples under the same experimental conditions which confirms the limited treatability of SVE in diesel contaminated soil.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.5 no.1
• /
• pp.6-10
• /
• 2003

This study was conducted to select the ozone tolerant individuals of Cornus controversa Hemsl., and to use malondialdehyde (MDA) content as an indicator of plant damage level for several oxidative stress levels. Seeds of C. controversa were collected at 9 provinces in Korea. One-year-old seedlings were grown in greenhouses and exposed to 100 pub ozone concentration for 8h day$^{-1}$ for 10 weeks. At the termination of ozone exposure, heights of seedlings were measured and MDA contents in the leaves were analyzed. Tolerant, intermediate, and sensitive individuals were selected using the standardized indices of height and MDA content. Height and MDA content of C. controversa exposed to ozone were significantly different among individuals and provinces. MDA content showed negative correlation (r=-0.531, p$\leq$ 0.001) with height growth performance. Height and MDA content of tolerant individuals presented significant differences from those of sensitive individuals. As a result, MDA content may be suitable for the evaluation of the damage level of plants by oxidative stress.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.11 no.2
• /
• pp.79-92
• /
• 2003

This study is to identify the hazard of ozone and to evaluate ozone effect that is flowed into the cabin when the airplane is flying at high altitude. For this purpose, it is studied that how ozone is generated in the air, what the effect on human body is due to the cabin ozone and what the design criteria is considering or preventing the ozone hazard. And, finally the regulations and means of compliance are studied and introduced to assure that the aircraft satisfies the design criteria related to ozone.