• Environmental and Resource Economics Review
• /
• v.29 no.3
• /
• pp.313-333
• /
• 2020

This paper shows that when the exchange rate changes, there are conflicting effects on improving the quality and increasing market share of eco-friendly vehicles. In a vertically differentiated duopoly model consisting of high quality clean cars and low quality internal combustion engine cars, I set up a two-stage noncooperative game under perfect information that the quality levels and the prices of the cars are competitively determined. The vehicles are assumed to be produced in countries that use distinct currencies. When the exchange rate of the country that produces low quality cars rises, the producer prefers to intensify competition due to the relatively lowed cost, and the incentive for quality improvement arises from the intension of attempting to reduce the degree of differentiation of quality level. At this time, the clean car manufacturing firm tries to avoid competition due to weakened competitiveness, and increases the quality level to expand quality differentiation. However, in this case, the market share of eco-friendly vehicles shrinks. On the other hand, if the exchange rate changes in the opposite direction, the market share of eco-friendly vehicles is expected to increase, but the quality of both cars are deteriorated, causing a conflict effect.

• Korean Journal of Environment and Ecology
• /
• v.31 no.3
• /
• pp.318-328
• /
• 2017

In order to provide basic data for the ecological management of forest vegetation in Southern Naeyeon Mountains, A total of 149 sample plots were selected and vegetation survey was carried out by the phytosociological method of the ZM school to classify vegetation types and to grasp ecological characteristics. The forest vegetation was divided into 10 types in terms of species composition, and had a unit hierarchy of 2 community groups, 4 communities, 6 sub-communities and 6 variants. A total of 19 types of physiognomic vegetation were identified based on uppermost dominant species, of which 18 were natural vegetation and 1 was artificial vegetation. As a result of the analysis of the importance values of constituent species, Quercus mongolica, a potentially natural vegetation element, was found to be relatively more important in most stands than other species, and excluding the artificial interference, most of the areas except for some sites would be changed to Q. mongolica forest. In order to understand the spatial distribution of forest vegetation, 1/5,000 large-scale physiognomic vegetation map was created by the uppermost dominant species. As a result, natural vegetation accounted for 98.2%, the number of vegetation patches was 733 and the average area per patch 3.93ha.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.1
• /
• pp.71-82
• /
• 2020

The existing transportation system, which is based on internal combustion engines, is rapidly being converted to electrification. Thus, eco-friendly public transportation with high transportation efficiency will continue to spread throughout the market in the near future. The purpose of this study is to compare and analyze the cognitive characteristics of passengers redgarding the technical and social factors of various public transportation means to help a successful introduction of eco-friendly public transit. Through a survey questionnaire (N=485), seven factors of seven transportation modes were evaluated and analyzed using principal component analysis. As a result, it is confirmed that potential passengers have high expectations for the eco-friendliness and city image of the eco-friendly buses. Also, it is confirmed that eco-friendly buses are superior in cleanliness and ride comfort than diesel buses. Given the study's results, this study identifies the cognitive characteristics of passengers regarding eco-friendly public transportation. We hope that these results will be used as basic information for image positioning and improved service with the use of eco-friendly transportation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.12
• /
• pp.1185-1192
• /
• 2012

The typical operating temperature of an automotive fuel cell is lower than that of an internal combustion engine, which necessitates a refined strategy for thermal management. In particular, the performance of the cooling module has to be higher for a fuel cell system because the temperature difference between the fuel cell and the surrounding is lower than in the case of the internal combustion engine. Even though the cooling system of an automotive fuel cell determines the operating temperature and temperature distribution of the fuel cell, it has attracted little research attention. This study presents the mathematical model of a cooling system for an automotive fuel cell system using Matlab/$Simulink^{(R)}$. In particular, a radiator model is developed for design optimization from the development stage to the operating stage for an automotive fuel cell. The cooling system model comprises a fan, pump, and radiator. The pump and fan model have an empirical relation, and the dynamics of the pump and fan are only explained by motor dynamics. The basic design study was conducted, and the geometric setup of the radiator was investigated. When the control logic was applied, the pump senses the coolant inlet temperature and the fan senses the coolant out temperature. Additionally, the cooling module is integrated with the fuel cell system model so that the performance of the cooling module can be investigated under realistic operating conditions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.582-594
• /
• 2016

Most studies on hybrid buses are on large-sized buses and not mid-sized low-floor buses. This study uses MATLAB simulation to evaluate the fuel efficiency of such buses powered by diesel. Based on the results, a hybrid electric vehicle system is recommended for the best combination of power and gear ratio. A parallel hybrid system was selected for the hybridization, which transmits front and rear wheel power independently. The necessary power to satisfy the target performance was calculated, and the applicable capacity area was designed. Dynamic programing was used to create and optimize a component sizing algorithm, which was used to scale the capacity of each component of the power source to satisfy the design criteria. The fuel efficiency rate, optimum power source capacity, and gear ratio can be improved by converting a conventional bus into a parallel hybrid bus.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.474-481
• /
• 2018

The policy-making and technological development of eco-friendly automobiles designed to increase their supply is ongoing, but the internal combustion engine still accounts for approximately 95% of automobiles in use. To meet the stricter emission regulations of internal combustion engines based on fossil fuels, the proportion of after-treatments for vehicles and (ocean going) vessels is increasing continuously. As diesel engines have high power and good fuel economy in addition to less CO2 emissions, their market share is increasing not only in commercial vehicles, but also in passenger cars. Because of the characteristics of the diesel combustion, however, NOx is generated in localized high-temperature combustion regions, and particulates are formed in the zones of diffusion combustion. LNT and urea-SCR catalysts have been developed for the after-treatment of exhaust gas to reduce NOx in diesel vehicles. This study examined the effect of a containing promoter on SCR catalysts to cope with the severe exhaust gas regulation. The de-NOx performance of the Mn-SCR catalyst was the best, and the de-NOx performance was improved as the ion exchange rate between Mn ion and Zeolyst was good and the activation energy was low. The de-NOx performance of the 7Cu-15Ba/78Zeoyst catalyst was 32% at $200^{\circ}C$ and 30% at $500^{\circ}C$, and showed the highest performance. The NOx storage material of BaO loaded as a promoter was well dispersed in the Cu-SCR catalyst and the additional de-NOx performance of BaO was affected by the reduction reaction of the Cu-SCR catalyst. Among the three catalysts, the 7Cu-15Ba/Zeolyst SCR catalyst was resistant to thermal degradation. The same type of CuO due to thermal degradation migrates and agglomerates because BaO reduces the agglomeration of the main catalyst CuO particles.

• The Journal of the Korean bone and joint tumor society
• /
• v.13 no.2
• /
• pp.105-112
• /
• 2007

Purpose: Recent studies have shown increased levels of cyclooxygenase-2 (COX-2) in various human malignancies to include various bone and soft tissue tumors. However, little is known with regard to COX-2 expression patterns in chondroid tumors. Materials and Methods: Immunohistochemistry assays were performed for COX-2 in enchondromas (n=10), chondroblastomas (n=11), chondromyxoid fibromas (n=5), conventional chondrosarcomas (n=17), clear cell chondrosarcomas (n=7), and mesenchymal chondrosarcomas (n=6). Results: Among the benign chondroid tumors, chondroblastomas revealed characteristic strong positivity in 6 of 11 cases(54.5%). All enchondromas and chondromyxoid fibromas were negative except in one case. In conventional chondrosarcomas, three cases(17.6%) were strongly reactive with COX-2 and all positive cases represented grade III chondrosarcomas. Clear cell chondrosarcomas were found to be focally positive in two cases(28.5%), while all mesenchymal chondrosarcomas were negative. Conclusions: These findings suggest that COX-2 overexpression in conventional chondrosarcoma may represent an advanced histologic grade. Interestingly, expression of COX-2 in chondroblastomas could be an important factor for inducing peritumoral inflammatory changes in these specific tumors.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.8
• /
• pp.1552-1565
• /
• 1992

Three dimensional numerical calculations were carried out for two different combustion chambers with the offset valve in order to investigate the swirl and the squish effects on the flow fields. The modified K-.epsilon. turbulence model considering the change of the density under the condition of the rapid compression and expansion of the pistion was used. During the compression process, it was found that the squish flow which controls the subsequent combustion process was produced due to the piston bowl in the bowl piston type combustion chambers but not for the flat piston type. The swirl velocity close to the solid body rotation was maintained in the flat piston type combustion chambers, but for the bowl piston type a resulting from the change of the solid body rotation was generated in the radial-circumferential plane. For the swirl ratio effect, as the swirl ratio increases, it was found that a large and strong vortex was generated in the radial-circumferential plane of bowl piston type combustion chambers because of the strong inward flows from the combustion chamber wall. These computational results were compared with the results of LDA measurement.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.5
• /
• pp.683-690
• /
• 2021

The ventilation system of the engine room of a ship is generally installed to supply the combustion air necessary for the internal combustion engine and to remove the heat source generated in the engine room, and it must satisfy the international standard (ISO 8861) for the design conditions and calculation standards for the ventilation of the ship engine room. The response delay of the ventilation system including the fire detector is affected by the airflow formed inside the area and the location of the fire detector. In this study, to improve the initial fire detection response speed of a fire detector installed on a fishing vessel and to maintain the sensitivity of the installed detector, the smoke behavior was simulated using the air flow field inside the engine room, the amount of combustion air in the internal combustion engine, and the internal pressure of the engine room as variables. Analysis of the simulation results showed that reducing the flow rate in the air flow field and increasing the vortex by reducing the internal pressure of the engine room and installing a smoke curtain would accelerate the rise of the ceiling of the smoke component and improve the smoke detector response speed and ventilation system.

• Journal of the Korean Institute of Gas
• /
• v.25 no.5
• /
• pp.11-18
• /
• 2021

Since hydrogen has the lower minimum ignition energy than that of gasoline, hydrogen could be also appropriate for the IC engine systems. However, due to the low ignition energy, there might be a 'back-fire' and 'pre-ignition' problems with hydrogen SI(Spark-ignition) combustion. In this research, cooling effects of intake gas mixture on the improvement of the maximum power output were evaluated in a 2.4 L SI engine. There were two ways to cool intake gas mixtures. The first one was cooling intake fresh air by adjusting inter-cooler system after turbocharger. The other one was cooling hydrogen fuel before supplying by using heat ex-changer. Cooling hydrogen was performed under natural aspired condition. The result showed that cooling fresh air from 40 ℃ to 20~30 ℃ improved the maximum brake power up to 6.5~8.6 % and cooling hydrogen fuel as -6 ℃ enhanced the maximum brake power likewise.