• Journal of The Geomorphological Association of Korea
• /
• v.19 no.2
• /
• pp.113-122
• /
• 2012

The geomorphic properties of potholes at Naerin River, Inje-gun are analyzed to discover the geosites of DMZ geopark in Gangwon-do. The furrow-type potholes along the river flow are mainly found in the P1 and P2 sites. The P3 site can be divided in to the zones where the furrow-type potholes densely distribute and various types of potholes are scattered, while the various types of small potholes are scattered in the P4 site. After measuring the 44 potholes, the potholes with a U-shaped cross-section, similar directivity with river flow and deposited gravels with in them show large values in length, width, depth and slope. Because the P1 and P2 sites are characteristic in the scales and forms of potholes and show beautiful scapes, it can be suggested that they are suitable for the geosite developments.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.564-564
• /
• 2013

홀 추력기는 플라즈마를 이용하는 전기추력기 중 하나로, 인공위성의 자세제어, 궤도수정, 궤도천이 뿐만아니라 행성간 임무수행을 위한 우주선의 엔진으로 사용된다. 홀 추력기 채널 내부에 발생된 Xe 이온들은 양극과 음극 사이에 존재하는 전기장에 의해 가속되어 추력을 발생시킨다. 이때 Xe 이온들은 자기장에 의해 감금된 전자와 중성 Xe 원자 사이의 충돌에 의해 발생하며, 실험적 및 이론적 연구를 통해 단일 전하를 띤 이온(Xe II)뿐만 아니라 다중 전하(Xe III 등)를 띤 이온도 생성되는 것으로 알려져 있다. 이온의 전하량 비율은 홀 추력기의 추력효율 및 연료효율에 영향을 미치며, 다중 전하를 띤 이온의 높은 에너지는 채널벽의 침식문제를 야기하는 등 홀 추력기 이온빔의 전하량 분석 연구는 물리적 연구측면 뿐만아니라 실용적인 측면에서도 매우 중요하다. 본 연구에서는 자기장과 그에 수직한 방향의 전기장에서 발생하는 로렌츠 힘을 이용하여 이온의 전하량을 분석할 수 있는 $E{\times}B$ 탐침을 설계 및 개발하였다. 개발된 $E{\times}B$ 탐침은 70 mm 길이의 집속기와 $148{\times}138{\times}90mm$의 본체, 40 mm길이의 콜렉터로 구성된다. $E{\times}B$ 탐침 설계에 가장 중요한 균일한 자기장 설계를 위해 전산모사를 통해 최적화 작업을 진행하였으며, 실험을 위한 진단계의 최적화와 초기 실험결과가 발표될 예정이다.

• Journal of Korean Society of Steel Construction
• /
• v.11 no.4 s.41
• /
• pp.339-350
• /
• 1999

In this study, blowholes, a kind of solid defects, were intentionally introduced in transverse butt-welded joints which are widely used for the connection of main members in steel structures to evaluate the fatigue characteristics of these joints with blowholes according to the difference of the size and shape of blowholes, and a series of tests were performed. Static test results proved that the static strength of these joints with blowholes was not affected by their size and shape. From the fatigue test results on these joints with blowholes, the size and shape of blowholes inside the weld metals were strongly affected in fatigue strength, and we suggested the relationship between fatigue strength and their size and shape quantitatively. Also, Using the relationship of fatigue crack growth rate and stress intensity factor range, the fatigue life of transverse butt-welded joints with blowholes can be estimated properly.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.6
• /
• pp.459-467
• /
• 2016

Using a line scan camera and a Galvano mirror, we constructed a high-speed line-scanning microscope that can generate 2D images ($8000{\times}8000pixels$) without any moving parts. The line scanner consists of a Galvano mirror and a cylindrical lens, which creates a line focus that sweeps over the sample. The measured resolutions in the x (perpendicular to line focus) and y (parallel to line focus) directions are both $2{\mu}m$, with a 2X scan lens and a 3X relay lens. This optical system is useful for measuring defects, such as spalling, chipping, delamination, etc., on the surface of carbon fiber reinforced plastic (CFRP) holes after machining in conjunction with adjustments in the angle of LED lighting. Defects on the inner wall of holes are measured by line confocal laser scanning. This confocal method will be useful for analyzing defects after CFRP machining and for fast 3D image reconstruction.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.337-337
• /
• 2010

하나로 반사체의 수직공 안에 설치된 냉중성자원 시설계통의 수조내기기는 원자로에서 생성되는 열중성자를 약 22K의 감속재로 감속시켜 0.1~10 meV 범위에서 높은 선속을 갖는 냉중성자를 생산한다. 냉중성자를 생산하기 위한 냉중성자원 시설계통의 구성은 감속재인 수소를 포함하고 있는 수소계통, 수소의 외부누출을 방지하기 위한 가스블랭킷계통, 극저온의 액체수소를 생산하기 위한 헬륨냉동계통, 극저온인 액체수소 층을 감속재용기 내에 유지하기 위한 진공계통 등으로 되어있다. 이들 계통 중 진공계통은 냉중성자원 시설계통의 정상운전 시 액체수소 열사이펀, 감속재용기 등의 냉중성자원 극저온 부품의 단열을 위하여 진공용기의 내부 진공도를 공정진공도 이하로 유지하기 위한 계통이다. 정상운전 시 진공계통으로부터 발생되는 배기 가스는 배기 수집탱크에 포집된다. 냉중성자원 시설계통으로부터 발생되는 배기가스는 배기수 집탱크를 통하여 수소의 누출여부를 확인한 후 원자로홀로 배기되도록 되어 있으며, 만일의 경우 탱크내부의 배기가스 수소 농도가 기준치인 3.5%이상일 때는 유입 원을 자동으로 차단하고, 희석용 가스인 고압의 질소를 주입하여 수소의 농도를 기준치 이하로 낮춘 후 원자로 홀로 자동 배출하도록 되어 있다. 본 논문에서는 냉중성자가 생산되는 냉중성자원 시설계통의 운전과정에서 진공계통으로부터 배출되는 배기가스를 배기수집탱크로 포집하고, 이 가스에 대해 수소가스의 농도를 분석하여 원자로 홀로 안전하게 배기할 수 있도록 수행된 수소가스 분석에 대해 기술하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.69-76
• /
• 2018

The present study analyzed the effect of film hole position of 45 degree ribbed cooling channel on film cooling performance of gas turbine blades. We also investigated the influence of the ribs under the fixed blowing ratio. Three-dimensional numerical model was constructed and extensive simulation was conducted using the commercial code (Fluent ver. 17.0) under steady-state condition. Base on the simulation results, We investigated the cooling effectiveness, flow velocity, streamline, and pressure coefficient. Moreover, We analyzed the effect of cooling hole position on ejection of the secondary flow caused by the rib structure. From the results, It was found that internal flow of the cooling channel forms a vortex pair in the counterclockwise from the top side, and clockwise from the bottom side. For the channels with ribs, the vortex flow generated by the ribs caused a higher pressure difference near the hole outlet, resulting in at least 12% higher cooling effectiveness than the channel without ribs. Additionally, when the hole is located on the left side of the ribbed channel (Rib-Left), it can be found that the secondary flow generated by the ribs hits against wall surface near the hole to form a flow in the direction of the hole inclination angle. Therefore, It is considered that the region where the cooling gas discharged to the blade surface stays in the main flow boundary layer is wider than the other cases. In this case, The largest pressure coefficient difference was observed near the outlet of the hole, and as a result, the discharge of the cooling gas was accelerated and the cooling efficiency was slightly increased.

• Journal of the Korean Vacuum Society
• /
• v.19 no.2
• /
• pp.121-127
• /
• 2010

Neutral gas in a Hall-effect thruster in a small satellite is simulated using a molecular dynamics code. Investigated are neutral density, pressure, axial average velocity, and temperature for the variation of diffusive reflection ratio, initial gas temperature, and channel length. Expected through this research are improving of discharge simulation through the neutral simulation and understanding of real system.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.139-145
• /
• 2010

An integrity testing for stone columns was attempted using crosshole S-wave logging. The method is conceptionally quite similar to the crosshole sonic logging (CSL) for drilled piers. The critical difference in the logging is the use of S-wave rather than P-wave, which is used in CSL, because swave is the only wave sensing the stiffness of slower unbounded materials than water. An electro-mechanical source, which can generate reversed Swave signals, was utilized in the logging. The stone column was delineated using the S-wave travel times across the stone column, the S-wave velocity profile of the crushed stone($V_{cs}$-profile) and that of surrounding soil($V_s$-profile). In the calculation of $V_{cs}$-profile of the crushed stone, its friction angle and Ko (coefficient of lateral earth pressure at rest) are recommended to be used. The calculation of the column diameter is not much affected by the values of friction angle and Ko.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.2
• /
• pp.493-503
• /
• 2000

There are two types of generators in the MHD generation : linear type Faraday and disk type hall generator. In this paper, it is experimented disk type hall generator. Disk type generator is driven by shock tube that compresses working gas isentropically in a very short time. As a working gas, helium gas seeded with cesium is used. it is difficult to confirm the whole condition thorough oかy experiment because the things happened in MHD generator is very complex. Furthermore we can't how exactly what happen at the inside of generator's channel because the time of generation is very short and working gas flows out very high speed. Expecially it is almost impossible to measure the things occurred in the boundary layer using MHD generation experimental equipment driven shock uk. With above reasons, to know certainly how the several values happened inside disk MHD generator charge, some graphs were drawn linearly through calculation using measured experimental data. For the more, other calculated results which can't be obtained by only experiment are considered in this paper. And these calculated results are compared to experiment data how exactly done the calculation.

• Proceedings of the KWS Conference
• /
• 2006.05a
• /
• pp.227-229
• /
• 2006

3차원 실장을 하기 위해서 딥핑 방법으로 전기적 신호를 전달할 수 있는 비아를 가진 실리콘 웨이퍼를 제작하였다. 레이저를 이용하여 실리콘 웨이퍼에 개구부가 원형에 가까운 관통 홀을 형성하였다. 관통 홀의 벽에 도금 방법으로 시드 층을 형성하였다. 관통 홀의 충전 금속은 Sn-3.5Ag-0.7Cu 솔더를 사용하였다. 딥핑 방법으로 시드 층과 솔더 사이의 확산 현상 이용하여 전기적 신호를 전달 할 수 있는 비아를 형성하였다. 비아 내부에 일부 기공과 크랙이 발견되기도 했으나 딥핑 방법을 통해서 빠른 시간 내에 비아를 가진 실리콘 웨이퍼를 제작 할 수 있었다.