• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.40-40
• /
• 1999

가속기나 토카막과 같은 거대한 진공 장치의 용기 내벽을 청정화 하기 위해서는 용기 전체의 열처리(굽기, Baking)와 글로우 방전(Glow discharge) 법을 병행하여 사용한다. Baking은 일반 기체(N2, O2, 그리고 CO2)와 물(H2O)의 탈착에 효과적이고, Glow discharge cleaning은 탄소(Carbon-based)와 산소(Oxygen-based) 화합물의 탈착에 효과적이다. 특히 Glow discharge cleaning의 경우에는 전극의 모양, 진공 용기의 재질과 모양, 전극간의 거리, 사용되는 반응 기체의 압력 등에 따라 그 효과에 큰 차이가 있으므로 다각적인 연구가 필요하다. 본 연구에서는 그림 1과 같이 시험용 스테인레스(AISI 304와 AISI 316LN) 진공 용기를 설치하고, 시험 용기의 한쪽은 배기 용기와 oriffice로, 다른 편은 불순물의 정성.정량 분석을 위해 RGA(Residual gas analyser) 용기와 oriffice로 연결하였다. 전체 시스템 중에서 배기 부분과 분석 부분은 15$0^{\circ}C$에서 24시간 가열하여 전체의 기저 진공도를 1$\times$10-8Torr로 하였다. 기저 진공도의 용기에 고순도의 반응기체 (He, Ar, Ar+He, Ar+H2, Ar+N2 등)를 주입한후, DC 전압(0.8~1.5kV)을 변화하며 글로우 방전의 최적조건을 찾았다. 방전 동안 시험용 용기에서 방출되는 반응 기체 이외의 기체를 RGA로 측정하였고 외부에 Thermocouple을 여러곳에 장착하여 온도 변화를 측정하였다. 이상의 결과로부터 진공 용기 표면적으로부터의 불순물 탈착(desorption)과 불순물 분석, 플라즈마와 내벽의 상호작용등에 대한 결론을 얻을 수 있었다. 또한 Baking과 Glow discharge cleaning을 동시에 수행하여 Baking 온도의 낮춤에 따른 영향 평가도 수행하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.3
• /
• pp.142-154
• /
• 2011

This study predicted the probability of corrosion initiation of reinforced concrete tunnel boxes structures using the Monte Carlo Simulation. For the inner wall and outer wall in the tunnel boxes, exposed to airborne chloride ion and seawater directly respectively, statistical values of parameters like diffusion coefficient D, surface chloride content $C_s$, cover depth c, and the chloride threshold level $C_{lim}$ were examined from experiment or literature review. Their average values accounted for $3.77{\times}10^{-12}m^2/s$, 3.0% by weight of cement, 94.7mm and 45.5mm for outer wall and inner wall, respectively, and 0.69% by weight of cement for D, $C_s$, c, and $C_{lim}$, respectively. With these parametric values, the distribution of chloride contents at rebar with time and the probability of corrosion initiation of the tunnel boxes, inner wall and outer wall, was examined by considering time dependency of chloride transport. From the examination, the histogram of chloride contents at rebar is closer to a gamma distribution, and the mean value increases with time, while the coefficient of variance decreases with time. It was found that the probability of corrosion initiation and the time to corrosion were dependent on the time dependency of chloride transport. Time independent model predicted time to corrosion initiation of inner wall and outer wall as 8 and 12 years, respectively, while 178 and 283 years of time to corrosion was calculated by time dependent model for inner wall and outer wall, respectively. For time independent model, the probability of corrosion at 100 years of exposure for inner wall and outer wall was ranged 59.5 and 95.5%, respectively, while time dependent model indicated 2.9 and 0.2% of the probability corrosion, respectively. Finally, impact of $C_{lim}$, including values specified in current codes, on the probability of corrosion initiation and corrosion free life is discussed.

• Korean Journal of Plant Taxonomy
• /
• v.43 no.1
• /
• pp.1-11
• /
• 2013

Pollen morphology of 20 species of Euphorbioideae and one from Crotonoideae was examined with light, scanning and transmission electron microscopy. The pollen morphology presented here did not support the monophyly of Euphorbioideae, and the unique characters of tribe Stomatocalyceae such as absence of aperture margins, and thick and continuous endexine suggest the exclusion of Stomatocalyceae from Euphorbioideae which is in accordance with previous phylogenetic studies and wood anatomical data. Aforementioned pollen features in this tribe support that it is closely related to Acalyphoideae. Two subtribes of Stomatocalyceae were well recognized in terms of pollen morphology: Hamilcoinae includes species with reticulate or microreticulate exine patterns, and Stomatocalycinae includes those with perforate patterns with small supratectal elements. Three subtribes of Euphorbieae, classified in terms of pollen morphology, were further divided into three different types including perforate in Euphorbiinae, microreticulate in Neoguillauminiinae and reticulate in Anthosteminae, strongly supporting the Webster's subtribal system. Hureae and Hippomaneae, having perforate sculpturing pattern with smooth margo, were similar in pollen morphology. Especially, the presence of small supratectal elements in Hura crepitans pollen suggests the close relationships with Excoecaria species of tribe Hippomaneae. According to the previous studies, unique intine thickness along the aperture margin in Euphorbieae was not reported elsewhere in Euphorbiaceae. However, in this study we found the same intine thickness along the aperture margin in Maprounea brasiliensis and Hura crepitans. We hypothesize that the similar intine thicknesses found in Euphorbieae and above two species are the evidence of close relationships among them.

• Progress in Medical Physics
• /
• v.10 no.3
• /
• pp.151-157
• /
• 1999

The GafChromic film was used for the dosimetry of a balloon angio catheter filled with the radioisotope HO-166 for endovascular irradiation. The balloon angio catheter was 2 cm long and 3 mm in diameter when inflated. The isotope, Ho-166, was produced by the neutron bombardment using the research reactor in Korea Atomic Energy Research Insititute. Co-60 teletherapy beam was used for making H-D curve for the Gaf-Chromic film. The film dosimetry was measured with a videodensitometer. The radial dose distribution indicated that the absorbed dose dropped to about 20% of the surface dose at the 1 mm away from the balloon surface and at 5 mm position the dose decreased to below 1% of the surface dose. The result also shows that with the specific activity of Ho-l66, 250 mCi/ml it takes 230 seconds to deliver 1200 cGy to the region where is 1mm away from the balloon surface. The concentric isodose curves were also presented. The Ho-166 is an another alternative for endovascualr irradiation to prevent restenosis after PTCA (Percutaneous Trans Coronary Angioplasty)

• Journal of dental hygiene science
• /
• v.17 no.2
• /
• pp.116-122
• /
• 2017

The purpose of this study was to evaluate the detection ability of secondary caries using qunatitative light-induce fluorescence-digital (QLF-D) device. Twenty bovine teeth with cavity on surface were demineralized during 21 days for secondary caries lesion of cavity wall. After 21 days, cavity was filled using composite resin and cut the specimen in half with disc. Fluorescence loss of lesion on surface by time flow, cross sectional lesion, and lesion of filled or unfilled surface were analyzed using analysis software. ${\Delta}F$ (value of fluorescence loss) of the lesion on surface assessed by the QLF-D increased significantly over time up to 21 days. And ${\Delta}F$ value of lesion of filled surface is significantly lower than that of unfilled surface (p<0.001). ${\Delta}F$ of filled surface is 1.31 times of cross section lesion. The correlation of between ${\Delta}F$ of filled surface lesion and ${\Delta}F$ of cross section lesion was showed low agreement (0.026) and correlation of between ${\Delta}F$ of unfilled surface lesion and ${\Delta}F$ of cross section lesion was showed high agreement (0.613). In conclusion, secondary caries can be detected on surface using QLF-D. However, interference of fluorescence of filling material is the points to be especially considered for exact analysis of secondary caries lesion.

• Journal of Energy Engineering
• /
• v.25 no.2
• /
• pp.1-20
• /
• 2016

A condensation heat transfer model is very important for the safety analysis of nuclear power plants. Especially, condensation under the presence of noncondensable gases (NCGs) is an important issue in nuclear safety because the presence of even a small quantity of NCGs in the vapor largely reduces the condensation rate. In this study, the condensation heat transfer model of the severe accident analysis code MELCOR 1.8.6 has been assessed using a set of condensation experiments performed under the thermal-hydraulic conditions similar to those inside a containment during design-basis accidents or severe accidents. Experiment conditions are categorized into 4 types according to the shape of the condensation surface: vertical flat plates, outer surface of vertical pipes, inner surface of vertical pipes, the inner surface of horizontal pipes. The results of the calculations show that the MELCOR code generally under-predicts the condensation heat transfer except the condensation on inner surface of vertical pipes.

• Korean Journal of Optics and Photonics
• /
• v.32 no.2
• /
• pp.68-78
• /
• 2021

A subminiature catadioptric omnidirectional optical system (SCOOS) with 2 mirrors, 6 plastic aspherical lenses, and an illumination system of 6 light emitting diodes, to observe the 360° panoramic image of the inner intestine, is optically designed and evaluated for a capsule endoscope. The total length, overall length, half field of view (HFOV), and F-number of the SCOOS are 14.3 mm, 8.93 mm, 51°~120°, and 3.5, respectively. The optical system has a complementary metal-oxide-semiconductor sensor with 0.1 megapixels, and an illumination system of 6 light-emitting diodes (LEDs) with 0.25 lm to illuminate on the 360° side view of the intestine along the optical axis. As a result, the spatial frequency at the modulation transfer function (MTF) of 0.3, the depth of focus, and the cumulative probability of tolerance at the Nyquist frequency of 44 lp/mm and MTF of 0.3 of the optimized optical system are obtained as 130 lp/mm, -0.097 mm to +0.076 mm, and 90.5%, respectively. Additionally, the simulated illuminance of the LED illumination system at the inner surface of the intestine within HFOV, at a distance of 15.0 mm from the optical axis, is from a minimum of 315 lx to a maximum of 725 lx, which is a sufficient illumination and visibility.

• Proceedings of the KAIS Fall Conference
• /
• 2002.05a
• /
• pp.70-73
• /
• 2002

도가니로를 사용하여 유리제품을 생산하고있는 중소 유리제조업체인 D.H사의 제품내 발생한 결함을 분석하였다. 제품내 결함으로는 기포, 코드(cord), 석물(stone)이 발생하고 있었으며, 광학현미경, EDS 등의 분석장비를 통해 제품내 결함을 분석한 결과 코드는 석물에 의해 발생하고 있음을 확인하였다. 석물의 EDS 분석결과 주요성분은 Si로 나타났으며, 이는 도가니의 장기간 사용시 도가니 내벽과 유리물의 반응에 의한 도가니의 용융침식에 의해 발생한 한가지 결점원에 의한 한가지 결정상으로 SiO₂의 고온결정상인 cristobalite임을 확인할 수 있었다.

• Journal of Chest Surgery
• /
• v.12 no.2
• /
• pp.97-100
• /
• 1979

Primary intrathoracic neoplasms occur frequently, and the most frequent intrathoracic tumors are of pulmonary or bronchogenic origin. Second in frequency are mediastinal tumors, and least frequency or comparatively rare are the neoplasms arising from the wall of the thorax and extending into the thoracic cavity. Of all intrathoracic tumors, fibroma is extremely rare. Recently, we have experienced a huge rapid growing intrathoracic fibroma originating from thoracic wall, which is removed successfully and confirmed histopathologically. Authors present one case of fibroma and discussion with a brief review of the relevant literatures.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.5
• /
• pp.670-679
• /
• 1986

본 논문은 내관 외벽에 나선형 인공조도가 있는 동심 이중관 사이의 유동특성 을 관찰하기 위해 일정 나선각에 대하여 피치비를 변화시키면서 선회속도, 축방향속도 압력을 측정하였으며, Han등의 연구에서 발표된 조도함수를 도입하여 유한차분법으로 수치계산을 수행하였다.