• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.233-233
• /
• 2014

질화 티타늄(Titanium Nitride)은 뛰어난 물리적 특성이 있어 내마모 재료의 표면처리 분야에 많이 사용되고 있다. 본 연구에서는 음극 아크 방전을 이용하여 빗각 증착을 실시하고 증착 시 기판에 bias 인가 여부에 따라 주상정의 방향성이 변하는 단층 및 다층의 TiN 박막을 제조하였으며 동일한 두께의 다양한 다층구조에서 경도의 증가를 확인하였다.

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.05
• /
• pp.207-208
• /
• 1995

• 기계와재료
• /
• v.21 no.4
• /
• pp.16-22
• /
• 2010

고온에서의 내열, 내산화, 내부식 등의 한계성을 극복하기 위하여 새로운 고온재료의 개발과 함께 표면특성 향상을 위한 코팅기술에 대한 연구가 계속 되어 왔다. 현재 선진국에서는 C/C복합재료를 비롯하여 $Si_3N_4$, SiC 및 SiC/SiC계 CFCC등의 규소계 비산화물 세라믹재료 등에도 표면에 내식, 내마모, 열차폐 및 내산화성에 견딜 수 있는 코팅층을 형성시켜, 표면에서의 산화, 열응력, 및 내산화성 등에 대한 특성평가 및 최적의 코팅층에 대한 연구가 진행중에 있으며 향후 국내에서도 육성해야할 중요한 기술분야이다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.125-125
• /
• 2011

티타늄 화합물은 뛰어난 물리적 특성과 인체 무해성을 가지고 있어 생체, 내식 및 내마모 재료 등에 널리 응용되고 있으며, 금(gold)색의 색상 구현을 통해 미적 기능성 향상을 위한 표면처리 분야에도 많은 관심을 받고 있다. 본 연구에서는 아크 방전법을 이용해 밀착력이 우수한 다층 TiN 박막을 제조하고 미세조직 변화에 따른 특성을 알아보고자 한다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.143-143
• /
• 2012

질화 티타늄(Titanium Nitride)은 뛰어난 물리적 특성이 있어 내마모 재료의 표면처리 분야에 많이 사용되고 있다. 본 연구에서는 음극 아크 방전을 이용하여 빗각 증착을 실시하고 증착 시 기판에 bias 인가 여부에 따라 주상정의 방향성이 변하는 단층 및 다층의 TiN 박막을 제조하였으며 동일한 두께의 다양한 다층구조에서 경도의 증가를 확인하였다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.3
• /
• pp.306-313
• /
• 2016

Tooth wear is known as a normal physiological process which gradually progresses. It is reported that vertical dimension can be kept stable because amount of physiologically worn loss could be compensated by growth of alveolar bone and tooth eruption. However, excessive tooth wear as pathologic wear can cause pathologic pulp, disharmony with occlusal plane, functional disorders and esthetic problems so that full mouth rehabilitation could be needed in these cases. Recovery of function and esthetic improvement should be considered for alteration of the vertical dimension. Determination of the vertical dimension of occlusion is needed to be in harmony with the neuromuscular system. This clinical report describes 36 year-old female patient who had chief complaint of severely worn dentition and esthetic discomfort. An increase of 2.0 mm at maxillary incisal edge was done to restore vertical dimension. It was based on the degree of tooth wear and esthetics.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.533-539
• /
• 2010

The The contactless railway abrasion measurement system have to satisfy two conditions to increase the measurement accuracy as follows. The laser region projected on the rail have to be extracted without the geometrical distortion. The mapping of the acquired laser region data on the rail profile have to be matched with the cross section of rail, exactly. But, the conventional railway abrasion measurement system is required the post image processing with a camera model and a perspective transform for the exact mapping between the cross section of rail and the coordinate data extracted from a line laser region or the raw image obtained from a camera because the image captured from the camera has an oblique viewpoint. So, the measured rail profile data had limits to the measurement accuracy because of a discontinuity point. In this Paper, we propose the 3D rail profile reconstruction method to increase the accuracy of the railway abrasion measurement system applying the modified camera model and perspective transform to the image obtained from the bidirectional rail.

• Tunnel and Underground Space
• /
• v.33 no.6
• /
• pp.534-546
• /
• 2023

If the disc cutter is excessively worn or damaged, it becomes incapable of rotating and efficiently cutting rockmass. Therefore, it is important to appropriately manage the replacement cycle of the disc cutter based on its degree of wear. In general, the replacement cycle is determined based on the results of manual inspection. However, the manual measurements has issues related to worker safety and may lead to inaccurate measurement results. For these reasons, some foreign countries are developing the real-time measurement system of disc cutter wear by using different sensors. The ultrasonic sensors, eddy current sensors, magnetic sensors, and others are utilized for measuring the wear amount of disc cutters. In this study, the applicability of eddy current sensors for real-time measurement of wear amount in TBM disc cutters was evaluated. The distance measurement accuracy of the eddy current sensor was assessed through laboratory tests. In particular, the accuracy of eddy-current sensor was evaluated in various environmental conditions within the cutterhead chamber. In addition, the measurement accuracy of the eddy current sensor was validated using a 17-inch disc cutter.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.2
• /
• pp.57-62
• /
• 2007

The lubricational characteristics about friction wear has an effect on the material quality of surface. In this paper, we studied the lubricational characteristics through the surface modification experiment by spray coating the surface with $MoS_{2}$ and PTFE solid lubricants. In the case of $MoS_{2}$ and PTFE coating, the friction coefficient of Journal is lower than that for noncoating so the friction characteristics is excellent. In particular, the beginning characteristics of $MoS_{2}$ coating is excellent, and in the case of PTFE coating, seizure dose not appear seizure. $MoS_{2}$ and PTFE coating are excellent in the extreme pressure at high load. The wear characteristics is excellent in the following order; PTFE < $MoS_{2}$ < Non Coating. For Non coating, seizure appears at the beginning due to the heat, but in the case of $MoS_{2}$ and PTFE coating, it will have the excellent heat stability even at high temperature.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.92-99
• /
• 2016

Polyurethane resin used to leather coat was synthesized by the addition reaction of PPG and PTMG with different mole ratios. Physical characteristics of the synthesized polyurethane resin were measured by the SEM, FT-IR and the UTM. Increasing mole ratio of PTMG having four methylene groups caused the increase of abrasion resistance and tensile strength. The elongation was decreased. As we measured the solvent(toluene) resistance of poly urethane resin, it was found the there were no effect of PTMG mole ratios on the phyhsical properties of the resin. The viscosity was increased by ratio of PTMG mole ratio.