• Korean Journal of Environmental Agriculture
• /
• v.15 no.3
• /
• pp.306-315
• /
• 1996

This study was performed to develop the biological treatment technology of wastewater polluted with heavy metals. The lead-tolerant microorganism, Pseudomonas aeruginosa which possessed the ability to accumulate lead, was isolated from the industrial wastewater polluted with various heavy metals. The characteristics of lead accumulation in the cells and the recovery of the lead there from were investigated. Removal rate of lead from the solution containing 100mg/l of lead by the lead-tolerant microorganism was more than 97% at 48 hours after inoculation with the microorganism. A large number of the electron-dense granules were found mainly on the cell wall and cell membrane fractions, when determined by transmission electron microscopy. Energy dispersive X-ray spectroscopy revealed that the electron-dense granules were lead complex with the substances binding heavy metals. The lead accumulated into cells was not desorbed by distilled water, but more than 87% of the lead accumulated was desorbed by 0.1M-EDTA. The residues of the cells after combustion at $550^{\circ}C$ amounted to about 30% of the dry weight of the cells. EDS analysis showed that the residues were relatively pure lead compounds containing more than 86% of lead.

• 한국문화재보존과학회:학술대회논문집
• /
• 2004.03a
• /
• pp.37-39
• /
• 2004

• Journal of Conservation Science
• /
• v.33 no.3
• /
• pp.167-179
• /
• 2017

In this study, Sangpyeontongbo excavated at Bigyeongdo, Seosan, were investigated to determine the components of the corrosion products that were formed while they were buried underwater in an anaerobic environment. The causes of corrosion product formation were also determined. Microstructure observation, element mapping, principle component analysis for each year, and the detection of corrosion products were carried out. Results indicate that the concretions of corrosion products on the surface are needle-, hexahedral-, and octahedral-shaped; Pb, Cu, and S were among the elements detected. The Cu-S layer was clearly verified using element mapping. An analysis of major elements for each layer showed that Cu, S, and Pb were present and that most Zn was eliminated. The corrosion products detected were $PbCO_3$ (concretion) and $Cu_{1.96}S$ (metal). Accordingly, the anaerobic corrosion properties of Sangpyeongtongbo are summarized as follows: dezincification, copper sulfide, and lead compound.

• Journal of the Microelectronics and Packaging Society
• /
• v.2 no.1
• /
• pp.35-48
• /
• 1995

마이크로회로내에서 티탄산바륨 중 바륨의 일부가 납으로 치환됨에 따른 전기적 특 성의 변화를 확인하기 위하여 MOD(금속유기화합물 분해법)공정에 의 barum 2-ethylhexanoate, barium neodecanoate, lead 2-ethylhexanoate 및 titanium dimethoxy 야 -2-ethylhexanoate 와 같은 MOC(금속 유기화합물) 들을 합성하고 공통 용매에 대한 용해 도를 시험하였다. 그 결과 barium 2-ethylhexanoate 만 p-xylene에 대한 용해도가 낮았으며 그 외의 다른 MOC들은 모두 p-xylene 단일 용매에 매우 잘 용해되었다. 바륨의 일부가 납 으로 치환된 티탄산 납바륨 박막은 MOC 혼합용액을 ITO/glass, Pt/SiO2/Si 및 Pt/Ti/SiO2/Si 웨이퍼 기판 위에 spin coating 하고 소성하여 얻었다. 이와 같이 얻어진 박막 의 전기적 특성을 측정하고 그 결과를 비교 고찰하였다.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.1
• /
• pp.75-84
• /
• 2005

The aim of this study is to evaluate the leaching characteristics of lead, copper, cadmium, and mercury from steel making slag by seawater. To demonstrate the leaching characteristics of heavy metals from steel making slag by seawater, it was carried to various leaching tests such as regular leaching tests, liquid/sold(LS) leaching test and pH static test. From the leachability of $Pb^{+2},\;Cu^{+2},\;and\;Cd^{+2}$ from steel making slag in pH static test, it is distinguished between distilled water and seawater. With distilled water, it is very low between pH 7-8 and pH 11-12. On the other hands, with the seawater, its leaching is higher than that of distilled water. In particular, concentration of $Hg^{+2}$ leached from slag by seawater is lower than that of distilled water. Meanwhile, we found that the heavy metals from steel making slag would be dissolved and precipitated using geochemcial equilibrium program such as visual minteq. Lead and copper leached from steel making slag with seawater were dissolved nearly in the range of pH 11-12, but in the range of pH 7-10 those were precipitated about 90%. And cadmium leached from steel making slag with seawater were dissolved completely. On pH static test with distilled water, lead leached from steel making slag seemed to be similar to pH static test with seawater. However, copper and cadmium leached from steel making slag were dissolved. In general, the species of lead leached from steel making slag were formed mainly of $PbCl^+,\;PbSO_4$, the species of copper were formed mainly of $CuSO_4,\;CuCO_3$, the species of cadmium were formed mainly of $CdCl^+,\;CdSO_4$ due to being sorbed with the anions($Cl^-,\;CO_3^{-2},\;SO_4^{-2}$) of the seawater. Both pH static test with seawater and distilled water, it is not in the case of the mercury. Most of mercury leached from steel making slag was precipitated(SI=0). Because the decreasing of $Hg^{+2}$ concentrations depends ferociously on the variation of chloride($Cl^-$) existed in the seawater. $Hg^{+2}$ leached from steel making slag could be sorbed strongly with chloride($Cl^-$) compared of carbonate($CO_3^{-2}$) and sulfate($SO_4^{-2}$) in the seawater. On the basis of that result, we found that the species of mercury was formed of calomel($Hg_2Cl_2$) as one of finite solid. Due to forming a calomel($Hg_2Cl_2$) in the seawater, the stability of mercury species by steel making slag should be higher than those of lead, copper, and cadmium species. Regarding the results stated above, we postulated that the steel making slag could be recycled to sea aggregates due to being distinguishing leachability of heavy metals($Pb^{+2},\;Cu^{+2},\;Cd^{+2},\;and\;Hg^{+2}$) between leaching tests by distilled water and seawater.

• Korean Chemical Engineering Research
• /
• v.43 no.6
• /
• pp.675-682
• /
• 2005

Al containing mesoporous molecular sieve (Al-MMS) was synthesized by hydrolysis of $H_2SiF_6$ and $Al(NO_3)_3{\cdot}9H_2O$. The material obtained was characterized by XRD, $N_2$-physisorption. The specific surface area was $981m^2/g$, and the average pore size was uniformity $39{\AA}$. It was confirmed that the acidity of Al-MMS was milder than that of zeolite Y based on the results of $NH_3$-TPD. Active materials, Pt and Pd, were loaded on Al-MMS in order to examine the feasibility of using Al-MMS as a catalyst support in the hydrogenation of aromatic compounds included in the residue oil of a naphtha cracker. The hydrogenation activity of PtPd/Al-MMS has been studied by following the kinetics of the hydrogenation of naphthalene, and by comparing the kinetic parameters obtained with Pt and Pd catalysts supported on the other mesoporous material support and commercial conventional support materials. PtPd/Al-MMS catalyst shows the highest activity of hydrogenation and sulfur resistance. The high activity of PtPd/Al-MMS was confirmed again in the hydrogenation of PGO (pyrolized gas oil), which is residue oil obtained from a naphtha cracker. Therefore, PtPd/Al-MMS can be applied to the hydrogenation of aromatic compounds included in the residue oil of a commercial naphtha cracker commericially.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.6
• /
• pp.307-313
• /
• 2010

Quantitative analytical condition for lead and cadmium in copper contained carbon materials using solvent extraction followed by inductively coupled plasma-atomic emission spectrometry was studied. Copper contained carbon samples were dissolved by nitric acid-perchloric acid digestion. Lead and cadmium were determined after separation with KCN masked copper by an dithizone-chloroform solvent extraction. Recovery efficiency of analyte elements was satisfactory, and most of matrix elements causing interference could be effectively eliminated by the separation. Lead and cadmium were quantitatively determined without influence of sample matrix, by applying it procedure to artifact sample.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.3
• /
• pp.453-457
• /
• 2006

A long-term leaching column experiment was performed to evaluate the teachability of the stabilized lead-contaminated soil using soluble phosphate. The study shows that Pb in the leachate was little detected and the remaining $PO_4-P$ concentration kept below 0.1 mg/L due to the formation of geochemically stable lead phosphate minerals from the reactions of labile soil Pb forms with the added soluble phosphate salt. After the experiment, there was no Pb migration from the top to the bottom of the stabilized soil column. But the Pb concentrations of the 12 soil samples from the control column decreased with the increase of the soil depth.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.3
• /
• pp.93-102
• /
• 2023

This study investigated the possibility of treating heavy metal pollutants existing in the air in addition to simultaneously removing NOx and SOx by injecting oxidizing and reducing agents into a scrubber into a microbubble device to create an eco-friendly method that does not generate secondary pollutants. Lead compound (Pb) was selected as the heavy metal substance in the air to be treated with microbubbles, and the removal efficiency was confirmed. By treating microbubbles by connecting them to a scrubber, it was confirmed that not only NOx and SOx but also heavy metal substances in the air were reduced, cost was reduced, and secondary environmental pollutants were not generated. Through this study, it was possible to simultaneously remove NOx, SOx, and heavy metals at low cost by applying an eco-friendly method, rather than the existing high-cost treatment method such as SCR. If oxidizing agent, reducing agent, and microbubbles are used appropriately, economical and efficient air pollution can be achieved. Since material processing was possible, it is expected to be helpful in the technological development of environmental prevention facilities.

• Analytical Science and Technology
• /
• v.20 no.1
• /
• pp.41-48
• /
• 2007

The determination method for the trace lead and cadmium in glass materials was developed by ICP-AES. The lead- and cadmium-DDTC chelates were formed by adding Na-DDTC (sodium diethyldithiocarbamate) as a chelating agent and extracted into MIBK (methyl-isobutyl ketone). Direct measuring of the trace lead and cadmium in glass was not possible because of the interferences of matrix elements as Na, Si, Mg and Ca of glasses unless solvent extraction of lead and cadmium was applied. This procedure was confirmed to be valid quantitative method of Pb and Cd analysis in glass did not influence of sample matrix, by applying it procedure to artifact sample and NIST SRM 1412.