• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.299-300
• /
• 2012

본 논문에서는 납 축전지를 사용하는 산업용 전기차량의 SOC(State Of Charge)를 별도의 BMS(Battery Management System)장치 없이 추정하는 방법에 대해 기술한다. SOC를 추정하기 위한 기존의 전통적인 방법들 중 전력을 적산하는 방법(Ampere hour counting)이 널리 사용되는데 이는 장치의 내, 외적인 요인에 의해 발생한 오차가 누적될 수 있다. 배터리의 전압을 측정하여 SOC를 추정하는 OCV(Open Circuit Voltage) 방법은 배터리가 안정 상태에 도달하기까지 충분한 휴지 시간이 필요해 실시간으로 적용하기 힘들다. 이 외에 칼만 필터를 이용하는 방법은 시스템을 정확히 모델링해야 하고 계산이 복잡하다는 단점이 있다. 본 연구에서는 전력을 적산하는 방법을 기본으로 하고 배터리의 전압을 적절히 이용하여 누적되는 오차를 보정하는 방법을 제안한다. 제안한 방법에 대해 시뮬레이션 하고 실제로 산업용 차량인 AC 전동 지게차로 실험하여 그 타당성을 검증 하였다.

• Radiation Oncology Journal
• /
• v.20 no.2
• /
• pp.172-178
• /
• 2002

Purpose : X-ray film over responds to low-energy photons in relative photon beam dosimetry because its sensor is based on silver bromide crystals, which are high-Z molecules. This over-response becomes a significant problem in clinical photon beam dosimetry particularly in regions outside the penumbra. In intensity modulated radiation therapy (IMRT), the radiation field is characterized by multiple small fields and their outside-penumbra regions. Therefore, in order to use film dosimetry for IMRT, the nature the source of the over-response in its radiation field need to be known. This study is aimed to verify and possibly improve film dosimetry for IMRT. Materials and Method : Modulated beams were constructed by a combination of five or seven different static radiation fields using 6 MeV X-rays. In order to verify film dosimetry, we used X-ray film and an ion chamber were used to measure the dose profiles at various depths in a phantom. In addition, in order to reduce the over-response, 0.01 inch thick lead filters were placed on both sides of the film. Results : The measured dose profiles showed a film over-response at the outside-penumbra and low dose regions. The error increased with depths and approached 15% at a maximum for the field size of $15{\times}15cm^2$ at 10 cm depth. The use of filters reduced the error to 3%, but caused an under-response of the dose in a perpendicular set-up. Conclusion : This study demonstrated that film dosimetry for IMRT involves sources of error due to its over-response to low-energy Photons. The use of filers can enhance the accuracy in film dosimetry for IMRT. In this regard, the use of optimal filter conditions is recommended.

• Progress in Medical Physics
• /
• v.19 no.1
• /
• pp.80-88
• /
• 2008

Recent radiotherapy dose planning system (RTPS) generally adapted the kernel beam using the convolution method for computation of tissue dose. To get a depth and profile dose in a given depth concerened a given photon beam, the energy spectrum was reconstructed from the attenuation dose of transmission of filter through iterative numerical analysis. The experiments were performed with 15 MV X rays (Oncor, Siemens) and ionization chamber (0.125 cc, PTW) for measurements of filter transmitted dose. The energy spectrum of 15MV X-rays was determined from attenuated dose of lead filter transmission from 0.51 cm to 8.04 cm with energy interval 0.25 MeV. In the results, the peak flux revealed at 3.75 MeV and mean energy of 15 MV X rays was 4.639 MeV in this experiments. The results of transmitted dose of lead filter showed within 0.6% in average but maximum 2.5% discrepancy in a 5 cm thickness of lead filter. Since the tissue dose is highly depend on the its energy, the lateral dose are delivered from the lateral spread of energy fluence through flattening filter shape as tangent 0.075 and 0.125 which showed 4.211 MeV and 3.906 MeV. In this experiments, analyzed the energy spectrum has applied to obtain the percent depth dose of RTPS (XiO, Version 4.3.1, CMS). The generated percent depth dose from $6{\times}6cm^2$ of field to $30{\times}30cm^2$ showed very close to that of experimental measurement within 1 % discrepancy in average. The computed dose profile were within 1% discrepancy to measurement in field size $10{\times}10cm$, however, the large field sizes were obtained within 2% uncertainty. The resulting algorithm produced x-ray spectrum that match both quality and quantity with small discrepancy in this experiments.

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.2
• /
• pp.59-67
• /
• 2014

The amount of the contaminants that can be adsorbed on the drain was evaluated for the effective remediation of the contaminated soil, and the contaminants adsorptivity of the drain was evaluated by comparing the isothermal adsorption model after carrying out the contaminants adsorption test of the reactants coated on the surface of the drain. The reactant used in the experiment is a natural zeolite, and the contaminants are copper, lead and cadmium. The results that Freundlich and Langmuir adsorption isotherm model are compared to the adsorption amount according to the change of the initial concentration by the contaminants. As a result of the component analysis, because Si, Al and O are contained approximately 28%, 11% and 48%, respectively, it is identified that the material coated on the surface of the drain is the component of the zeolite which is the reactant for the adsorption of the heavy-metal (Cu, Pb, Cd) contaminants. The heavy-metal adsorption kinetic of the zeolite which is the reactant was decreased in order of lead, copper and cadmium. The important factor of the performance evaluation of the adsorbent is the reaction rate, and if zeolite is used as the reactant in the relationship between the maximum amount of adsorption and reaction rate, it can be utilized as the design factor that determine the removal order of the complex heavy-metal. In other words, because the maximum adsorption quantity of lead is smaller compared to copper but the reaction rate is relatively fast, it can be primarily removed, and copper can be removed after removing the lead. It was analyzed that Cadmium can be finally removed after that other heavy-metal is removed.

• The Journal of Korean Society for Radiation Therapy
• /
• v.33
• /
• pp.145-153
• /
• 2021

Purpose: The purpose of this study is to evaluate the ovarian dose during radiation therapy for breast cancer in women of childbearing age through an experiment. The ovarian dose is evaluated by comparing and analyzing between the calculated dose in the treatment planning system according to the treatment technique and the measured dose using a thermoluminescence dosimeter (TLD). The clinical usefulness of lead (Pb) apron is investigated through dose analysis according to whether or not it is used. Materials and Methods: Rando humanoid phantom was used for measurement, and wedge filter radiation therapy, 3D conformal radiation therapy, and intensity modulated radiation therapy were used as treatment techniques. A treatment plan was established so that 95% of the prescribed dose could be delivered to the right breast of the Rando humanoid phantom 3D image obtained using the CT simulator. TLD was inserted into the surface and depth of the virtual ovary of the Rando hunmanoid phantom and irradiated with radiation. The measurement location was the center of treatment and the point moved 2 cm to the opposite breast from the center of the Rando hunmanoid phantom, 5cm, 10cm, 12.5cm, 15cm, 17.5cm, 20cm from the boundary of the right breast to the center of treatment and downward, and the surface and depth of the right ovary. Measurements were made at a total of 9 central points. In the dose comparison of treatment planning systems, two wedge filter treatment techniques, three-dimensional conformal radiotherapy, and intensity-modulated radiation therapy were established and compared. Treatments were compared, and dose measurements according to the use of lead apron were compared and analyzed in intensity-modulated radiation therapy. The measured value was calculated by averaging three TLD values for each point and converting using the TLD calibration value, which was calculated as the point dose mean value. In order to compare the treatment plan value with the actual measured value, the absolute dose value was measured and compared at each point (%Diff). Results: At Point A, the center of treatment, a maximum of 201.7cGy was obtained in the treatment planning system, and a maximum of 200.6cGy was obtained in the TLD. In all treatment planning systems, 0cGy was calculated from Point G, which is a point 17.5cm downward from the breast interface. As a result of TLD, a maximum of 2.6cGy was obtained at Point G, and a maximum of 0.9cGy was obtained at Point J, which is the ovarian dose, and the absolute dose was 0.3%~1.3%. The difference in dose according to the use of lead aprons was from a maximum of 2.1cGy to a minimum of 0.1cGy, and the %Diff value was 0.1%~1.1%. Conclusion: In the treatment planning system, the difference in dose according to the three treatment plans did not show a significant difference from 0.85% to 2.45%. In the ovary, the difference between the Rando humanoid phantom's treatment planning system and the actual measured dose was within 0.9%, and the actual measured dose was slightly higher. This did not accurately reflect the effect of scattered radiation in the treatment planning system, and it is thought that the dose of scattered radiation and the dose taken by CBCT with TLD inserted were reflected in the actual measurement. In dosimetry according to the with or without a lead apron, when a lead apron was used, the closer the distance from the treatment range, the more effective the shielding was. Although it is not clinically appropriate for pregnancy or artificial insemination during radiotherapy, the dose irradiated to the ovaries during treatment is not expected to significantly affect the reproductive function of women of childbearing age after radiotherapy. However, since women of childbearing age have constant anxiety, it is thought that psychological stability can be promoted by presenting the data from this study.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.48-48
• /
• 2008

현재 압전재료로써 사용되고 있는 PZT계 세라믹스는 우수한 압전 및 유전특성으로 초음파 센서, 압전변압기, 액츄에이터, 필터, 레조네이터와 같은 여러 응용분야에 널리 사용되어지고 있다. 그러나 납을 60%이상 포함하므로 환경오염에 의하여 그 사용에 대한 규제가 강화되고 있어 최근에는 납을 함유하지 않은 무연 환경친화형 압전세라믹스가 주목받고 있다. 현재 무연 조성 세라믹스에는 텅스텐-브론즈 형, 비스머스 레이어형, 페로브스카이트 형 등이 이으며, 그 중 페로보스카이트 혈을 제외하고는 보통 소성법 조제시 낮은 압전특성을 갖는다. 그러므로 압전특성을 증가시키기 위하여 Hot pressing, Hot forging, RTGG(Reactive Template Grain Growth), SPS(Spark Plasma Sintering), 그러나 이는 무연 세라믹스의 대량생산 과정에서 어려운 문제를 가지고 있고, 저가격 관점에서 볼 때 보통소성법이 보다 바람직하다. 그래서 보통소성법으로 NKN세라믹스의 소결성을 향상 시키고 비교적 높은 압전특성을 얻기 위해서 $LiSbO_3$, $LiNbO_3$, $LiTaO_3$, alkaline-earth(Mg, Ca, Sr, Ba) 등을 첨가한 논문들이 보고되고 있으며, 이러한 재료들의 kp는 대략 0.3-0.4를 나타내고 있다. 따라서, 본 연구에서는 소결온도를 낮추고자 $Ag_2O$를 소결조제로 사용하였고 유전 및 압전특성을 높이고자 소결시간 변화시켜 시편을 제작하여 NKN 세라믹스의 유전 및 압전특성을 조사하였다.

• Resources Recycling
• /
• v.30 no.1
• /
• pp.66-76
• /
• 2021

Electric arc furnace dust (EAFD) contains compounds, such as oxides and chlorides, including large quantities of Zn, Pb and Fe. An efficient and stable method for the extraction of metal elements from EAFD is the Rotary Kiln Process. This method is used to recover Zn in the form of crude ZnO (approximately 60%) via the addition of a reducing agent (coke, anthracite) and limestone (for basicity control) to EAFD. This process is commonly used in industry as well as in research and development. Currently, this method is used in many Korean commercial plants, producing approximately 150,000 tons of Crude ZnO per year. The majority of Zn is found in crude ZnO (approximately 76%). In addition components such as Pb, Cd, Sn, In, Fe, Cl, and F are present as oxides, chlorides, and alkaline compounds. This elements have an adverse effect on the zinc smelting process. Therefore, a refining process that eliminates these impurities is essential. In this study, we developed a process technology that efficiently separates Zn and Pb from byproducts (mainly chlorides). A bag filter was used to collect Zn and Pb generated during the dry purification process of crude ZnO. Pure components were recovered as metals or metal carbonate.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.11a
• /
• pp.19-20
• /
• 2009

최근 화학, 물리, 생명과학, 전기, 전자등의 다양한 분야에 활발하게 연구가 이루어지고 있는 초분자 화학은 선택적 분자인지를 위한 효율적인 골격구조와 나아가 다양한 계에 응용할 수 있다. 초분자 화학의 분자인지 과정의 특징은 일반적으로 수용체 (receptor 혹은 host)가 목표가 되는 기질 (substrate, analyte, 혹은 guest)에 대하여 선택적으로 식별하고 반응하는 것이다. 비공유 결합성 상호작용에 의하여 이루어지는 초분자 화학의 분자 인지 과정의 특징은 일반적으로 수용체 (receptor 혹은 host)가 목표가 되는 기질 (substrate, analyte, 혹은 guest)에 대하여 선택적으로 식별하고 반응하는 것이다. 이는 공유결합을 이용하는 분자화학과는 차별화 된 것이다. 수용체는 간단한 구조의 화합물 및 금속 이온들과 같은 기질과 가역적으로 상호 작용할 수 있는 착물을 형성한다. 최근들어 급격한 산업화가 진행되어 환경문제가 심각하게 대두 되어져 왔고, 그 중에서 특히 수은이나 카드뮴에 의한 질병, 납에 의한 중독 등 중금속에 의한 오염이 크게 나타남에도 불구하고, 현재 그러한 중금속을 검출함에 있어 많은 비용과 시간이 드는 문제점이 있다. 또한 우리에게 이로운 금속은 효율적 분석을 통해 환경계와 의료계에 많은 도움을 줄 것으로 사례되므로 화학센서 기술의 개발은 절실히 요구되어지고 있다. 이에 새로운 1,3-bisdicyanovinylindane 을 통해 $Hg^{2+}$ 금속의 감지 여부 알아보고, 그 특성을 파악하고자 한다. 1,3-indandion (2.18g, 14.9mmol), malononitrile (2.95g, 44.7mmol), ethanol 50ml를 20분간 상온에서 용해시킨다. 후에 sodium trihydrate acetate(3.05g)을 첨가한 후 5시간 동안 환류반응 시킨다. 이 과정에서 얻어진 용액을 필터과정을 통하여 에서 합성 반응 중에 생성된 불순물(1,3-dicyanovinylindane-1-one, monocondensation)을 제거한다. 필터과정을 통해 걸러진 미 반응 물질을 제�G 용반응욕액을 증류수(100ml)를 이용하여 희석시키고 난 후 염산을 이용, 산성화 시켜 고체 생성물을 얻어낸다. 이렇게 생성된 고체 생성물은 다시 필터 및 건조를 통하여 회색의 고체 화합물을 얻어낸다. 1,3-bisdicyanovinylindane과 금속이온에 대한 감응도를 확인하기 위하여 metanol/water(1:2)을 용매로 하여 금속이온의 농도를 변화시켜 발색특성을 살펴보았다. 본 색소화합물과 Hg2+에 대한 UV 흡광도 변화 적정결과와 그 화합물의 상태 살펴본 결과 금속이온이 0.2ml씩 더 참가되면서 색의 변화를 뚜렷하게 나타내었다. 반면 그 밖에 이온($Fe^{3+}$, $Ag^{2+}$, $Pd^{2+}$, $Zn^2$, $Fe^{2+}$, $Cu^{2+}$, $Pb^{2+}$)은 UV 흡광도 변화가 적거나 변화 자체가 없었다. 하지만 과량의 $Fe^{3+}$, $Ag^{2+}$, $Pd^{2+}$는 색상 변화를 나타내었으며,이와 같은 흡광도 변화는 금속에 따라 약간의 차이가 있지만, 420nm를 등흡수점으로 하여, 580nm의 파장 영역에 있는 흡수 밴드의 세기는 감소하는 반면 400nm 파장 영역에 있는 흡수 밴드의 세기가 증가하였다. 1,3-bisdicyanovinylindane 화합물은 다양한 생물계 및 환경계에서 요구되는 micro mol에서 milli mol 농도 영역의 $Hg^{2+}$ 이온의 선택적이고 민감한 검출과 정량적인 분석에 유용하게 사용될 수 있을 것이다.

• Journal of the Korean Chemical Society
• /
• v.48 no.6
• /
• pp.590-598
• /
• 2004

The preconcentration and determination of trace Cu(II) and Pb(II) on calcium alginate beads in aqueous solution were studied. A calcium alginate beads were prepared by adding an alginic acid to sample solution contained Ca(II). Some following conditions were optimized: the pH of sample solution, amount of alginic acid, and stirring time for effective adsorption; the type and concentration of acid, and sonication time in an ultrasonic vibrator for the perfect de-sorption. A sample solution was prepared with Cu(II) and Pb(II) in DI water. And Ca(II) and ethanol was added into the sample solution. The pH of the final sample solution was controlled with buffer solution. The alginic acid were dispersed in the sample solution by a magnetic stirrer. This mixture was stored in room temperature for 30 min to form a calcium alginate. After the beads were filtered and washed on a membrane filter, the analytes were redissolved from the beads by an ultrasonic vibration of 10 minutes in 1.0M $HNO_3$ solution. The effect of diverse ions on the adsorption of analytes were studied. This procedure was applied for the analysis of two real samples. The recoveries in spiked samples were $90.4{\sim}104.3%$ for analytes.

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.2
• /
• pp.45-55
• /
• 2015

In Incheon area, 1960s of economic development planning and heavy industry center of efforts industrial park and port facilities, It is industrial land reclamation by coastal landfill, these industrial park has the characteristics of Low permeability lipid is embedded in the silty sand that was dredged. In this study, To evaluate the heavy metal adsorption ability to filter of drains that have been developed as environmentally friendly materials by applying the effective zeolite to heavy metal adsorption for soil pollution purification suitable for geological characteristics of Incheon. soil pollution Survey data and Literature search, which is the current through the industry, the most problematic was set to Cadmium (Cd) and Copper(Cu), Lead (Pb). and Using the Numerical Analysis using the Visual Modflow, was presented the most efficient drains set interval and format.