• Spatial Information Research
• /
• v.14 no.1 s.36
• /
• pp.129-150
• /
• 2006

Mineral potential mapping is an important procedure in mineral resource assessment. The purpose of this study is to analyze mineral potential using weight of evidence model and a Geographic Information System (GIS) environment to identify areas that have not been subjected to the same degree of exploration. For this, a variety of spatial geological data were compiled, evaluated and integrated to produce a map of potential mineral in the Gangreung area, Korea. for this, a spatial database considering mineral deposit, topographic, geologic, geophysical and geochemical data was constructed for the study area using a GIS. The used mineral deposits were non-metallic(Kaolin, Porcelainstone, Silicastone, Mica, Nephrite, Limestone and Pyrophyllite) deposits of sedimentary type. The factors relating to mineral deposits were the geological data such as lithology and fault structure, geochemical data, including the abundance of Al, As, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Mo, Na, Ni, Pb, Si, Sr, V, Zn, $Cl^-,\;F^-,\;{PO_4}^{3-},\;{NO_2}^-,\;{NO_3}^-,\;SO_{42-}$, Eh, PH and conductivity and geophysical data, including the Bouguer and magnetic anomalies. These factors were used with weight of evidence model to analyze mineral potential. Probability models using the weight of evidence were applied to extract the relationship between mineral deposits and related factors, and the ratio were calculated. Then the potential indices were calculated by summation of the likelihood ratio and mineral potential maps were constructed from Geographic Information System (GIS). The mineral potential maps were then verified by comparison with the known mineral deposit areas. The result showed the 85.66% in prediction accuracy.

• Journal of Environmental Science International
• /
• v.7 no.2
• /
• pp.149-156
• /
• 1998

Enoronmental problems caused by certain geologic conditions Include pollution of soil by heavy metal, acidization of souls , acid mine drainage, Pound-water pollution, and natural radioactivity, as well as zoo-logical hazards such as landslide and subsidence. The acrid mine drainage contains large amount of heavy metals nO, therefore. cause serious pollution onto the nearby drainage systems and soils. In spite of this prospective environmental danger, few studies have been done on the acid mine drainage derived from non-metallic ore deposits such as pyrophyllitefNapseok) deposits. The sudo-bearing pyrophyllite ores, alteration zones, and mine talllngs of pyrophylllte deposits produce acrid mine drainage by the okidation of weathering. Compared to the fresh host rocks, the ores and altered rocks of pyrophyllite deposits produce acidic solution which contain higher amount of heavy metals because of OeP lower buffering capacity to acrid solution. The pus of urine water and nearby stream water of pyrophyllite deposits are 2.1~3.7, which are strong- ly acidic and much lower than that (6.2~7.2) of upstream water and than that (6.8~7.6) of the stream water derived from the non-mineralized area. This study reveals that this acrid mine drainage can affect the downstream area which is 8km far from the pyrophyllite deposits, even though the drain Is diluted with abundant non-contaminated river water This suggmists that not only acid mine drainage but also the sulfide-bearing sediments originated from the pyrophyllite deposits move downstream and form acidic water through continuous oxidation reaction. The heavy metals such as Pb, Zn, Cu, Cd, Nl, Mn and Fe are enriched In the mine water of low pH, and their contents decrease as the pH of mine water Increases because of the Influx of fresh stream wainer. SoUs of the Pyrophyulte deposits are characterized by high contents of heavy metals. The stream sediments containing the yellowish brown precipitates formed by neutralization of acid mine drainage occur in all parts of the stream derived from the pyrophyllite deposits, and the sediments also contain high amounts of heavy metals. In summary, the acid mine drainage of the pyrophyllite deposits is located in the upstream part of Hoidong water reservoir in Pusan contains large amounts of heavy metals and flows into the Holdong water reservoir without any purification process. To protect the water of Holdong reservoir, the acid mine drainage should be treated with a proper purification process.

• Journal of the Mineralogical Society of Korea
• /
• v.4 no.1
• /
• pp.1-10
• /
• 1991

Tosudite from the Sungsan mine, Korea is an alteration product of rhyolitic tuff in the cretaceous Hwangsan Formation. It is associated with illite, dickite, nacrite or quartz and also found in the cavities of black claystone. X-ray diffraction and chemical analyses show that the Sungsan tosudite is a lithium-bearing aluminous 1:1 regularly interstratified mineral of di, dioctahedral chlorite and smectite. Its structural formula is $(K_{0.73}Na_{0.02}Ca_{0.07})(Si1_{13.23}Al_{2.77})(Li_{0.52}Mg_{0.08}Mn_{0.01)Fe^{3+}_{0.07}Al_{12.33})O_{40}(OH)_{20}$ and it suggests that Sungsan tosudite consists of regularly interstratified Li-donbassite and beidellite. DTA and TG curves as well as IR absorption data also support such a result. Temperature of formation of tosudite is inferred to be between $110{\circ}$ and $270{\circ}C$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.5
• /
• pp.192-202
• /
• 2019

Physicochemical properties and sintering characteristics of pottery stone (Taebaek, Haenam, Aphae, Haengnam) were evaluated as a raw material for porcelain products. Due to acid leaching procedure, the concentration of iron oxide ($Fe_2O_3$) was decreased to < 1.0 wt%, which affects the whiteness of sintered samples. Mean particle size of acid leached samples is $5.7{\sim}10{\mu}m$ with narrow particle size distribution (PSD), which is lower than that of the pristine ($8{\sim}18{\mu}m$) with broad PSD. According to phase analysis by X-ray diffraction, most of pottery stones (PS) have Quartz phase as a main phase with Pyrophyllite as a second phase, however, Haenam PS shows halloysite phase. The absorption rate was in order of Taebaek (A, B, C)~Aphae (A, B) < Taebaek (Special A) < Haengnam < Haenam, and the samples sintered in reductive atmosphere showed lower absorption rate. This result might be due to the concentration of feldspar contained in PS, working as a flux in sintering process. Comparing the color of the sintered samples, the whiteness of refined PS (Taebaek special A, Haenam, Hangnam) is higher than acid leached PS (Taebaek A/B/C, Aphae A/B). The whiteness (L*) for refined PS is 95~97 %, which is higher than acid leached (82~96 %). This might be due to lower iron oxide concentration of the refined PS (0.11~0.58 %) than those of the acid leached PS (0.41~1.91 %) even though most of iron oxide was removed by acid leaching.

• Journal of the Mineralogical Society of Korea
• /
• v.7 no.1
• /
• pp.25-39
• /
• 1994

The Deogbong napseok clay deposit which is composed mainly of dickite and pyrophyllite has been formed by hydrothermal alteration of the Late Cretaceous volcanic rocks consisting of andesitic tuff and andesite. The mineralogy of the napseok ores and the hydrothermal alteration processes have been studied in order to know the nature of the interaction between minerals and fluids for the formation of the deposit. Chemical distribution shows that alkali elements and silica were mobile but alumina was relatively immobile during the hydrothermal processes. It is evident that enrichment of alumina and leaching of silica from the host rock led to the formation of the napseok ore, whereas the enrichment of silica in the outer zone of the deposit gave rise to the silica zone. A large amount of microcrystalline quartz closely associated with dickite and pyrophyllite suggests the increasing activity of silica. Thus Si which was released away from the argillic zone by the increasing activity of silica. Thus Si which was released away from the argillic zone by the increasing activity of silica solubility moved out precipitating in the margin of the deposit to form the silica zone. Variation in dickite crystallinity implies the local change in the stability of the system. Thermodynamic calculation shows that the invariant point of pyrophyllite-dickite (kaolinite)-diaspore-quartz assemblages at 500 bars in the system $Al_{2}O_{3}-SiO_{2}-H_{2}O$ is about 300 $^{\circ}C$. Based on the mineral assemblages and the experimental data reported, it is estimated that the main episode of hydrothermal alteration occurred at least above 270 to 300 $^{\circ}C$ and $X_{CO_2}$ <0.025. Mineral occurrence and chemical variation indicate that the activity of Al is high in the upper part of the deposit, whereas the activity of Si is high in the lower part and the margin of the deposit. The nonequilibrium phase relations observed in the Deogbong deposit might be due to local change in intensive thermodynamic variables and fluid transport properties that resulted in the formation of nonequilibrium phases b of several stages.

• Journal of Conservation Science
• /
• v.21
• /
• pp.5-20
• /
• 2007

The stone artifacts in Bronze age from the Hyocheon sites in the Gwangju, Korea were studied on the basis of material characteristics and provenance presumptions. The use and rock names of the artifacts are a stone shovel by andesite, the stone grinding pestle by pyrophyllite, the stone sickle by schist and four stone semifinished artifacts by slates. Andesitic stone shovel could be observed easily around the Hyocheon relic site. But, rocks of the stone grinding pestle, the stone sickle, the stone arrowhead and the stone semifinished artifacts could be confirmed typical occurrences of the all kinds of rocks around the Hwasun coal mine area above 10km from the site. These are made the coupled samples with each stone artifact to the same kinds of raw material rocks based on analysis of the lithology and geochemistry. As a result a geochemical evolution trends of both a stone artifact and the rock showed very similar patterns based on normalization using the behavior, enrichment, compatibility and incompatibility of the elements. Therefore, the source rock of the stone shovel was convey from Mudeung mountain possible interpreted that the domestic-type artifacts are distributed in the vicinity of the Hyocheon site. On the other hand, the stone grinding pestle, the stone sickle, the stone arrowhead and the stone semifinished artifacts were convey from the Hwasun coal mine area possible foreign-type stone artifacts interpreted that the source rocks. Consequently, in the foreign-type stone artifacts are should archaeologic research which it can examine various possibilities clearly that the possibility to coming the introduction with the mankind migration, diffusion to dealings of tribe, the captured enemy equipment through the war and the trade with the behavior of the materials.

• Journal of Korean Elementary Science Education
• /
• v.24 no.3
• /
• pp.259-267
• /
• 2005

This study was to investigate the elementary students' preconception on the brightness of electric bulb and degree of consistency on their preconceptions. Participants were 160 students of fifth graders in Seoul area. They had already teamed about the brightness of series circuit and parallel circuit of batteries. After they solved six problems in the same context, we provided them a pair of circuit which was an anomalous situation. And then they conducted CCLT (Cognitive Conflict Level Test). Elementary school students showed various preconceptions when they explained the light of bulb of two Simple electric Circuits. Many Students Consistently Showed the Scientific misconceptions like 'the light of bulb of two simple electric circuits was that the more batteries and the fewer bulbs were brighter.' The level of consistency that students presented scientific misconceptions was grouped all of four, such as 'high, middle, low, and nothing.' Therefore the higher scientific achievement they have, the higher consistency they have. As the students had high consistency level, they revealed high cognitive conflict level significantly. This high consistency will help them to change their preconception on the brightness of electric bulb and their cognitive conflict.

• Economic and Environmental Geology
• /
• v.25 no.4
• /
• pp.397-416
• /
• 1992

In the present study, three clay deposits, named the Seongsan, Ogmaesan and Haenam deposits, were investigated. The altered zones are recognized in the hydrothermally altered rocks of the clay deposits from the center of the alteration to the margin: Kaolin, Kaolin-Quartz, Quartz, Sericite and Chlorite zones in the Seongsan deposits; Quartz zone, Alunite zone, Kaolin zone, Sericite zone and Chlorite zone in the Ogmaesan deposits; Quartz zone, Pyrophyllite zone, Sericite zone and Chlorite zone in the Haenam deposits. These zones can be grouped into two types of alteration: Acidic alteration such as Pyrophyllite zone, Alunite zone, Quartz zone, Kaolin zone, Kaolin-Quartz zone and a part of Sericite zone; Propylitic alteration such as Chlorite zone and a part of Sericite zone. All clay deposits belong to high-sulfidation (acid-sulfate) system. The rocks of the acidic alterations are composed of pyrophyllite, alunite, kaolin minerals, sericite, quartz and pyrite. On the basis of bulk chemical compositions, it was found that some components such as $SiO_2$, $TiO_2$, $Fe_2O_3$, FeO, MgO, CaO, $K_2O$ and $Na_2O$ were mobilized considerably from the original rocks. The mobility of these major elements is related to, and controls, mineral assemblages in each altered zone. Polytypes of sericite are determined as $2M_1$ and 1M by X-ray diffraction method. The amount of $2M_1$ is nearly equal to that of 1M in the Seongsan deposits whereas $2M_1$ is less and higher than that of 1M in the Ogmaesan and the Haenam deposits. These facts indicate that formation temperature of sericite is relatively high in the Haenam deposits, moderate in the Seongsan deposits, and low in the Ogmaesan deposits. The ratios of Na/(K+Na) for alunite in the Ogmaesan deposits determined by electron microprobe analyzer (EPMA) are higher than those in the Seongsan deposits. Thus, the alunite of the Ogmaesan deposits must have been formed from the solutions with relatively high aqueous Na/(K+Na) ratios and low pH at a high temperature rather than that of the Seongsan deposits. From all data, it is clarified that alunite is hypogene in origin, and has been formed by oxidation of hydrogen sulfide in the steam-heated environment, and that alunite has been produced by the spectacular solfataric alteration observed at the surface of some present-day hydrothermal systems.

• Archives of design research
• /
• v.12 no.2
• /
• pp.157-168
• /
• 1999

Stone in the Cho Sun Dynasty has been used as the material of industry arts, widely building materials and an important material for the artistic design. But it has been generally used as an use of practical living Product like, suban, a metal printing type, a fire place, a pillowcase, a pencil case, etc, and ornament with the quality of stone material and the aesthetic view. There are several problems as like size, quantity, delivery and processing method with the stne material according to its variety and selection. Accordingly it has been studied through the whole process of shape, a material selection of design and processing method as well as studying about small stone crafts which were manufactured in the Cho Sun Dynasty, considering these problems. Stone crafts in Cho Sun Dynasty has been widely used as a living tool. There was some what difference on manufacturing purpose on its technique of folk crafts of stone crafts, but, through the research of collected crafts, they were almost the same that social need, user's taste and hobby in those days were reflected in. In the result of analysis as dividing the stone crafts into daily living product, stationery and tool, the major of daily products have been manufactured with emphasis of practicability. And they have been manufactured from agalmatolite for the propose of use. further, kitchen product had no design due to the function and living products which has been used in the main living room has been carved with the decorative expression of the various form by using intaglic, relieve, inlaid technique, etc. For the stationery, it has been characterized with aesthetic point considering the decorative effects & selection of material in accordance with use. A material for manufacturing has been used in the range of agalmtolite, atopaz, a sapphire, white stone etc. As the result of this research, It was noticeable that there was the spleudidness on the expression of design and carving. It was also noticeable that black stone and guanite have been widely esed because it didn't need the delicacy as a tool.