• Proceeding of EDISON Challenge
• /
• 2012.04a
• /
• pp.89-92
• /
• 2012

초음속 항공기를 설계하는데 있어서 일반적인 항공기와는 다른 성능이 요구되는데 그것은 바로 초음속에 의한 충격파가 발생시키는 추가적인 항력을 감소시키는 일이다. 날개의 Airfoil 형상을 결정하기 위해서는 공력 특성을 파악해야 하는데, 이를 알아보는 데 있어서 EDISON_CFD를 사용하였다. 충격파의 생성을 지연시키는 Supercritical Airfoil의 여러 형상에 필요한 격자를 생성하여 비점성, 압축성 유동 해석을 수행하였다. 비교에 필요한 다섯 개의 NASA Supercritical Airfoil을 선정하여, 아음속과 초음속으로 나누어 받음각에 따른 양력계수와 항력계수를 도출하고, 이를 토대로 양항비를 추정해 보았다. 추려진 것 중 가장 우수한 공력성능을 보이는 airfoil을 선정하였는데 그 결과 NASA SC-0403 airfoil의 공력 성능이 가장 뛰어나 그것을 선정하기로 하였고, 또한 2차원 공력 해석에서 얻은 양력계수를 면적에 대하여 적분하여 날개에서의 양력과 항력을 추정하였다.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.5
• /
• pp.42-47
• /
• 2012

Newly updated wing shape to apply small vertical wind turbine is tested with digital wind tunnel in this study. Digital wind tunnel is designed to reduce length of wind tunnel and also to maximize its area of test section. Same DC fans of ninety six are installed in the end side of its rectangular duct and air can be blown out to the other side to have uniform flow with same electricity power. New wing is concluded using experimental plan and analysis with 4-parameters and 3-levels, and tested with digital wind tunnel. It shows better performance in lift to drag ratio, and can applied to the wind turbine for the higher torque and lower thrust.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.6
• /
• pp.431-439
• /
• 2016

This paper reports a numerical method for determining the resistance and self-propulsion performance of an asymmetric pre-swirl stator used as an energy saving device by cancelling a propeller's rotational energy. The present asymmetric pre-swirl stator propulsion system consists of three blades at the port and one blade at the starboard, which can effectively recover the biased rotating flow. This paper provides the design concept for the present asymmetric stator, which produces more efficient results than a conventional propeller.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.5
• /
• pp.329-337
• /
• 2016

As a turbulence-enhancing device, a mixing vane, which is installed at a spacer grid of the fuel assembly, plays an important role in improving convective heat transfer by generating either swirl flow in the subchannels or cross flow between the fuel rod gaps. Therefore, both the geometric configuration and the arrangement pattern of a mixing vane are important factors in determining the performance of a mixing vane. In this study, in order to examine the flow-distribution features inside a $5{\times}5$ fuel assembly with split-type mixing vanes, which was used in the benchmark calculation of the OECD/NEA, we conduct simulations using the commercial computational fluid dynamics software, ANSYS CFX R.14. We compare the predicted results with measured data obtained from the MATiS-H (Measurement and Analysis of Turbulent Mixing in Subchannels-Horizontal) test facility. In addition, we discuss the effect of the split-type mixing vanes on the flow pattern inside the fuel assembly.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.5
• /
• pp.445-452
• /
• 2017

The wing leading edge skin in this research is an essential structural factor for improving wings' aeromechanical functions, protecting the interior elements of the wings from external damage including birds, and navigating planes safely. The study compared and reviewed models manufactured for optimal light-weight wings of composite UAVs. It compared and investigated displacement forms of torsion loads through finite element analysis using MSC. Patran/Nastran. By confirming the improvement of light-weighting performance according to lamination type, thickness change and shape through torsion strength tests of each model, the research suggested the optimal light-weight wing leading edge skin for small composite UAVs.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.2
• /
• pp.24-30
• /
• 2004

• Journal of Aerospace System Engineering
• /
• v.10 no.4
• /
• pp.50-58
• /
• 2016

In our preceding study, we reported that the use of light, composite-material wings in long-endurance Solar-Powered UAVs is a critical factor. Ribs are critical components of wings, which prevent buckling and torsion of the wing skin. This study was undertaken to design and manufacture optimal composite ribs. The ribs were manufactured by applying laminated-layer patterns and shapes, considering the anisotropic properties of the composite material. Through the finite element analysis using the MSC Patran/Nastran, the maximum load and the displacement shape were identified. Based on the study results measured by structural tests, we present an optimal design of ribs.

• Composites Research
• /
• v.25 no.6
• /
• pp.224-229
• /
• 2012

The structural performance is degraded in case of embedding the array antenna for reconnaissance and surveillance into the wing skin structures. In this paper, the optimal design for the thickness of composite hat-shaped stiffener which is reinforced embedded array antenna on the simplified composite wing box was conducted. To select the basic shape of hat-shaped stiffener, structural analysis was carry out using the commercial finite element analysis program while changing the web slope and flange length of hat-shaped stiffener. The optimal thickness of the composite hat-shaped stiffeners was determined by using commercial optimization program such as VisualDOC and commercial FEA program with considering stresses and buckling constraints.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.46-51
• /
• 2013

In this paper, the optimum placement and shape of UHF antenna on the unmanned aerial vehicle (UAV) are analyzed by using the electromagnetic (EM) simulation on the various locations. The FEKO was used for the EM-simulation. In order to reduce the complexity of simulation and minimize the runtime and memory usage, the composite aircraft structure is simplified as the PEC model excluding the radome structure. The simulation was performed on the wing and ventral fin of UAV, and the antenna shape used the monopole, dipole, and bent monopole antennas. When the monopole antenna is mounted under the wing, two antennas need to be mounted under the right and left wings, and those antennas have to be switched as the direction of UAV wing to the line of sight (LOS) data-link (DL) ground antenna. In the case of mounting under the ventral fin, one antenna can be used regardless of the direction of UAV wing to the LOS DL ground antenna. Also, the antenna gain is improved by the blockage reduction. The antenna gain is further improved by using the bent monopole antenna. The optimum solution of UHF antenna placement and shape on UAV is to mount the bent monopole antenna under the ventral fin.

• Journal of the Korea Computer Graphics Society
• /
• v.9 no.2
• /
• pp.19-26
• /
• 2003

본 논문은 두개의 날개를 가진 다양한 생명체들의 형상과 움직임을 복잡한 공기역학 없이 body-brain 공진화를 사용하여 생성하는 시스템을 기술한다. 인공생명 기술이 다양한 가상생명체들을 생성하는데 이용되었지만 제한된 기하학적 요소들을 사용한 날개 생성의 어려움과 매우 복잡한 공기역학으로 인하여 하늘의 생명체들을 탐색한 연구들은 매우 드물다. 본 논문의 진화된 생명체들은 시스템의 단순함에도 불구하고 심미적인 모습과 유기적인 날개침 동작을 보여준다. 진화 알고리즘을 위한 유전형 인코딩에 쓰인 자료구조는 제한된 리스트 구조로서 이는 방향그래프와 유사하나 더욱 쉽게 다루어질 수 있다. 본 시스템으로 진화된 생명체는 연속적인 삼각형 패치로 이루어진 두개의 대칭형 날개를 가지며, 새, 나비, 박쥐 혹은 상상적인 용이나 익룡 등을 연상시키는 다양한 모습과 기동을 보여준다.