• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.3
• /
• pp.215-222
• /
• 2010

Long and slender body, like a fuel rod, oscillating in axial flow can be unstabilized even by the small cross flow which can be activated by the flow mixer or turbulent generator. It is important to include these effects of flow disturbance in dynamic stability analysis of nuclear fuel rod. This work shows how eigen frequency of a multi-span fuel rod can be changed by the swirl flow, which is discretely generated by a flow mixer. By solving a state-space form of the eigenvalue equation for a multi-span fuel rod system, the critical velocity at which a fuel rod becomes unstable was calculated. Based on the simulation results, we evaluated how stability of a multi-spanned nuclear fuel rod with mixing vanes can be affected by the coolant flow in an operating reactor core.

• Journal of Mushroom
• /
• v.15 no.3
• /
• pp.150-154
• /
• 2017

A self-propelled turner was developed to produce mushroom compost at low costs and high efficiency, and the uniformity of compost produced by an excavator, compost mixer, and self-propelled turner was compared. The material of the compost was mixed with rice straw and chicken manure at a dry weight ratio of 3:1. After the final turning, internal temperature distribution, water content of the compost pile, ash ratio, and uniformity of the compost pile were examined. After the compost was completed, the water content was $69.9{\pm}0.54%$, $72.1{\pm}0.15%$, and $74.5{\pm}0.82%$, respectively. The length of rice straw was $47.5{\pm}15.4cm$, $24.9{\pm}10.1cm$, and $31.0{\pm}10.6cm$, respectively. The ash content in the dry weight of each compost was $25.0{\pm}6.2%$, $33.6{\pm}4.2%$, and $28.2{\pm}1.1%$, respectively. The deviation in the length of rice straw was affected by the linear velocity of the spinner in the compost mixer and the self-propelled turner, which were 21.5 m/sec and 9 m/sec, respectively. As a result, the most uniform mushroom compost was produced by the self-propelled turner.

• Journal of Korean Society of Forest Science
• /
• v.86 no.3
• /
• pp.378-390
• /
• 1997

Ten total populations of Korean fir (Abies koreana Wilson) and Manshurian fir [A. nephrolepis (Traut.) Maxim.] were sampled from south Korea to investigate patterns of intraspecific variation in these species and to evaluate a recognition of the two species. Principal components analysis and cluster analysis were performed both on seed-cone data and on needle morphology data. The characters that contributed most to the separation between A. koreana and A. nephrolepis along three principal components axis were leaf width, length of seed, width of seed wing, length of seed wing, cone width, width of scale, and length of bract tip, but these characters were not diagnostic because of overlap in reality. Therefore, all these characters were not reliable in distinguishing these two taxa including bract position (exerted and recurved vs. exerted and straight). The individuals of A. koreana from Mt. Chi-ri appeared quite unique probably on account of its larger cone size and longer scale tip, while those from Mt. Hal-la of A. koreana were generally distinct from others in terms of their larger seed and seed wing and longer scale width. The Mt. Duk-yu specimens of A. korecana appeared somewhat smaller but more data were needed due to the small sampling size. Generally, the gradual clinal geographic trends made evident by the position of resin ducts in leaves of A. koreana can be detected. The southern populations, Mt. Hal-la (an insular population) were generally distinct from the northern populations (Mt. Chi-ri, Mt. Ga-ya and Mt. Duk-yu) in terms of their position of resin duct (medial, within mesophyll vs marginal, close to epidermis : 100% vs 75 or 50%). Although no sharp boundary separating these two species could be detected based on cone and needle morphology, the observed clinal pattern was distinct in northern populations of A. koreana and southern population of A. nephrnlepis. In a preceding study of the flavonoids variation of 20 species in eastern Asia, flavanone (5-deoxyflavanone) was found to be characteristic of A. faxoniana Rehder et Wilson, A. georgei Orr of China and A. koreana of Korea. A. faxoniana, which is assumed to be primitive species, has position of resin duct relative to both the medial and the marginal, while A. georgei and A. koreana are identified by marginal position of resin duct. With respect of foliar flavonoids chemistry, A. koreana was distinct from A. nephrolepis : the southmost samples (Mt. Hal-la and Mt. Chi-ri) contained additional flavonoids derivatives (mainly flavanone) that were not found in the northmost samples of A. nephrolepis except a few individuals from Mts. Seo-rak and Tae-bak populations of Kwang-won province. The presence of A. koreana type flavonoids in two Chinese species suggested that position of resin duct may be a phyletic character. Abies koreana including two Chinese taxa, exhibited the most elaborate and specialized flavonoids profile within the Abies in eastern Asia. Contrary to our initial expectations, the apparent intermediates between A. nephrolepis and A. koreana in Duk-yu and Ga-ya mountains were found. The pattern of variation on position of resin duct and flavonoids chemistry in these populations of A. kareana suggested that genetic interchange or natural hybridization had occurred between these two species. The evidence needed to resolve the status of this taxon is still inconclusive in our opinion until intermediate individuals from Mts. Duk-yu and Ga-ya show indication of hybridization between the two species.

• Korean journal of applied entomology
• /
• v.48 no.1
• /
• pp.53-57
• /
• 2009

Biological Characteristics of Lycorma delicatula and insecticidal activity of some insecticides against nymphs of L. delicatula was investigated. Nymph of L. delicatula had 4 instars, and color of body was black. There were white spots on the body of 1st-3rd nymph. Upper body became red at 4th nymph. Adult forewings were brownish, and had black spots. Color of hind wing were red. The egg mass was covered with a yellowish brown secretion. The adult of L. delicatula emerged once a year. Among test insecticides, deltamethrin 1% EC and fenitrothion 50% EC showed very quick and strong insecticidal activity against the 2nd-3rd nymphs of L. delicatula. Imidacloprid 4% SL and clothianidin 8% SC showed 100% insecticidal activity at 24h after treatment. Thiacoprid 10% SC revealed the weakest insecticidal activity among the insecticides tested.

• Korean Journal of Environmental Biology
• /
• v.37 no.3
• /
• pp.426-432
• /
• 2019

The aim of the present study was to investigate the temporal changes of moth communities in two forest types of the agroecosystem in the southwestern part of Korea, an isolated hillock forest and a continuous mountain forest. Temporal changes in the numbers of moth species and individuals at both forests showed no significant difference, although the numbers of individuals in the isolated hillock forest were decreased. The relationship between changes in moths and body size based on wingspan revealed that the larger moths decreased more in the isolated hillock forest, whereas no effect of body size on change of moths was observed in continuous mountain forest samples. Non-metric multidimensional scaling resulted in the grouping of moth communities by forest types and 10-year time intervals. In the future, long-term monitoring is needed to track the changes in moth communities in agroecosystems. Additionally, we need to investigate the effect of other ecological variables on changes in moth diversity.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.5
• /
• pp.282-290
• /
• 2013

The effects of the combination of blade number for forward and after propeller on the propeller shaft forces of a contra-rotating propeller (CRP) system are presented in the paper. The research is performed through the numerical simulations based on the Reynolds-Averaged Navier-Stokes equations (RANS). The simulation results of the present method in open water condition are validated comparing with the experimental data as well as the other numerical simulation results based on the potential method for 4-0-4 CRP (3686+3687A) and 4-0-5 CRP (3686+3849) of DTNSRDC. Two sets of CRP are designed and simulated to study the effect of the combination of blade number in behind-hull condition. One set consists of 3-blade and 4-blade, while the other is 4-blade and 4-blade. A full hull body submerged under the free surface is modeled in the computational domain to simulate directly the wake field of the ship at the propeller plane. From the simulation results, the fluctuations of axial force and moment are dominant in the case of same blade numbers for forward and after propellers, whereas the fluctuations of horizontal and vertical forces and moments are very large in the case of different blade numbers.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.5
• /
• pp.681-688
• /
• 2000

In this paper, a planar antenna that is small and light, is designed and analyzed aiming handset antenna of IMT-2000. Employing the Ensemble simulator based on a MoM, design-parameters are found to determine a resonant frequency. Therefore, it is analyzed with the Ensemble simulation and FDTD numerical for resonating at the allocated frequency for IMT-2000 in the fixed antenna dimension of 21$^{\circ}$wing angle that is a design parameter. Analyzing with FDTD method, Though the results of FDTD are very exact, this analysis introduces errors due to the staircasing approximation in the slope of bowtie. To reduce this error, it is divided to 4-ranges where the cell contains the boundary of perfect conductor/free space. Then, each range is calculated by different by different equation, which modify the H-field to add the component of the area and length of the cell filled with free space. Therefore, the modified FDTD algorithm provided with a narrow bandwidth of return loss calculated with a standard FDTD algorithm that can be extended to the desired ranges.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.6
• /
• pp.467-474
• /
• 2012

UAVs for reconnaissance and intelligence operations require long endurance capability, which demands high efficiency of the propulsion system. The distributed propulsion system(DPS) generates the thrust by replacing a large propulsion system with a number of small propulsion systems. A DPS distributed along the wing span can produce gains in propulsion efficiency by reducing ejection velocity. Also, the ingestion of boundary layers through the distributed DPS inlet and ejecting flow from the outlet can improve the lift to drag ratio of the vehicle. This study investigates the effects of locations and size of the inlet and outlet of the DPS on the blended-wing-body design based on Eppler 337 airfoil, with a CFD tool. The fans in the DPS are modeled as actuator disks for computational efficiency. The best location and aspect ratio of the inlet and outlet are found from lift-to-drag ratio and pitching moment considerations.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.50 no.3
• /
• pp.396-406
• /
• 2014

Shrimp beam trawl fishery is one of the important coastal fisheries in Korea. It has a regulation to the length of beam (8m) and wing net (7m) of shrimp beam trawl that has been used in the district of Junlanam-do and Gyungsangnam-do. This regulation was made in relation to the size of shrimp beam trawler of 3-ton class at that time. Now the shrimp beam fishing vessel has a limit not greater than 5 tons in gross ton. Recently, with improvement of fishing industry and fishing vessel fishermen asked the expansion of the length of beam and wing net, therefore it is necessary to investigate the effect of lengthening the beam and wing net length. Three different beams (8m, 10m and 12m in length) and three different wing net (7m, 10m and 13m in length) were made and the experiment was conducted near Narodo of Goheng by two fishing vessels of 4.98 and 4.88 tons in gross ton between June 2011 and October 2012. When the length of wing net was increased from 7m to 10m and 13m, the relative catch ratio in total biomass was increased 25% and 79% for shrimp, (17% and 22% in total), respectively. And when the beam length was increased from 8m to 10m and 12m, the relative catch ratio was increased 35% and 84% for shrimp, (21% and 37% in total), respectively. The force exerted to the iron guide of inhauler's with the beam length of 8m was about 30% greater than that with the beam length of 10m when hauling the shrimp beam trawl net.

• Korean journal of applied entomology
• /
• v.43 no.3 s.136
• /
• pp.225-231
• /
• 2004

An endoparasitoid wasp, Cotesia plutellae, has been used for a biological control agent against the diamondback moth, Plutellae xylostella. It has a symbiotic polydnavirus in their reproductive tract, which is required for its successful parasitization. Here, we measured a specific replication time of the polydnavirus during female development of C. plutellae. We, also, analyzed the reproductive potentials of female C. plutellae under mating or different host conditions. At $25^{\circ}C$, pupal C. plutellae began to develop adult tissues such as compound eyes and wings since day 2. At day 5, all adult tissues including antennae were developed and were ready to emerge. With polyclonal antibody raised against C. plutellae polydnavirus, an immunobloting could confirm virus replication at day 4 during pupal stage. Virus particles could be visualized by transmission electron microscope in the oviduct lumen of day 5 pupae. After adult eclosion, venom gland and ovarian calyx increased in size, though ovarioles did not. Mated females layed large number of eggs (over $60\%$) at first 4 days during their mean longevity of ca. 8 days at $25^{\circ}C$. Unmated females showed less active ovipositional behavior, where all the eggs developed into males. C. Plutellae parasitized both P. xylostella and fall webworm, Hyphantria cunea. However, C. Plutellae developed faster and showed higher successful paarasitization in P. xylostella than in H. cunea.